Tender For Construction Of Foot Path Beautification Ward No. 01 Gata Shankhya 409 M Talab Ki Piching V Footpath Banakr Sondrikaran Ka Karya., Kheragarh-Uttar Pradesh
TDR : 42714407
Tender Notice
BOQ
Expired
Kheragarh
Uttar Pradesh
Tender For Construction Of Foot Path Beautification Ward No. 01 Gata Shankhya 409 M Talab Ki Piching V Footpath Banakr Sondrikaran Ka Karya.
Name of Work: Ward no. 01 Gata shankhya 409 m talab ki piching v footpath banakr sondrikaran ka karya.
Sl. No.
Item Description
1
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR 2.8
2
E/W in cutting or in filling with its cartage up to 08 km all complete.AN
3
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8
4
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :Cement mortar 1:6 (1 cement : 6 coarse sand) : DSR 7.6.1
5
Coursed rubble masonry with hard stone (first or second sort) in super structure above plinthMasonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand) : DSR 7.8.1
6
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) : DSR 6.1.2
7
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :Flush/ Ruled pointing
8
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (i) 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern DSR 16.91.2
9
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 4.1.3
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.