|
| 1 | Comprehensive Maintenance and Repairs of following Electrically Operated Lifts, 42 Nos. as listed in Appendix \"A\" with collective/ selective control by carrying out periodical checks, repairs and testing as specified and as recommended by the manufacturers and as directed by the Engineer-in-Charge to ensure smooth, safe and efficient functioning including all spares / accessories etc. of compatible make except the spares as catered hereunder complete and all as specified in Particular Specifications and as directed by Engineer-in-Charge.[i] Naval ParkG+9 Floors ECE Make: Passenger Lifts of 10 Passengers Capacity - 9 Nos. and Goods Lifts of 2000 KGs capacity - 07 Nos.[ii]Nausena Baugh G+14 Floors ECE Make: Passenger Lifts of 10 Passengers Capacity - 8 Nos.and Goods Lifts of 2000 KGs capacity - 4 Nos. [iii]Nausena Baugh G+14 Floors IES Make: Passenger Lifts of 8 Passengers Capacity - 2 Nos.and Passenger Lifts of 13 Passengers Capacity - 3 Nos.[iv]ND[V] Kuthar Block G+5 Floors IES Make: Passenger Lifts of 8 Passengers Capacity - 1 No.and Goods Lifts of 1000 KGs capacity- 1 No.[v]INS Satavahana G+5 Floors OTIS Make: Passenger Lifts of 10 Passengers Capacity - 3 Nos.[vi]INS Satavahana G+6 Floors Johnson Make: Passenger Lifts of 8 Passengers Capacity - 1 No.[vii]INS Satavahana G+3 Floors IES Make: Passenger Lifts of 10 Passengers Capacity - 2 Nos.[viii] INS Dega G+2 Floors IES Make: Passenger Lifts of 8 Passengers Capacity - 1 No. |
| 2 | Notes for Serial Item No. 1:[a] MANPOWER TO BE EMPLOYED: The contractor shall be required to employ minimum 3 Nos. of lift mechanic and 03 Nos. of Helper with sound knowledge and adequate experience. All the manpower employed shall report to Office of AGE [E/M]/ Complaint Cell for day to day maintenance and efficient functioning of Lifts Round the Clock including day to day checking of serviceability of lifts and all safety features alongwith the lift operators and submission of daily progress of maintenance/ repairs/ checking and updating the details in the Registers.[b] The rate quoted is deemed to be inclusive of supply and fixing of all Spares (Mechanical/ Electrical/ Electronic) such as Push buttons, Door rollers, guide shoes, Brake coils, limit switches, door couplers, alarms, Position indicating lights, Auxilary contactors, LED lights, Relays, cabin fans, control transformers, control fuses, etc. including consumables such as librication oil, grease, etc. Buffing of walls/ ceilings of lift car (except Spares catered vide Serial Item No. 2 to 28 of BoQ) as and when required for trouble free and smooth and efficient functioning of lifts including overhauling as and when required to all mechanical parts of lifts, Rewinding of Electric Motors, repair/maintenance of Gear Unit, repair / maintenance of Door Drive, Controllers, Pulleys, Limit Switches, Relays etc. complete all as directed by the Engineer-in-Charge. |
| 3 | [c] All the safety measures including ARDs shall be ensured for serviceable condition round the clock and cost of their spares,etc. shall deemed to be included in the rate quoted. Nothing extra shall be paid extra on these accounts. [d] Spares catered vide Serial Item No. 2 to 28 of BoQ shall be measured and paid separately as \"Supply Only\" whenever required and rate quoted for Serial Item No. 1 of BoQ shall be excluding the same. However, fixing / repairs shall be deemed to be included in the rate quoted.[e] The rate quoted shall be deemed to be inclusive of testing of each lift by Licensed Lift Inspector of Government of Andhra Pradesh for the worthiness certificate TWICE during the contract period for thesafety of lift. Certificate issued by the Licensed Lift Inspector shall be submitted to the Engineer-in-Charge and a copy of Certificate shall be displayed in all Lift Cabins as directed by Engineer-in-Charge.[f]Emergency Light and necessary tools shall be available in a tool box in the shift for smooth functioning of lifts.[g]Conveyance and communication system like mobile phone etc. shall be provided by the contractor to all Lift Mechanics and Helpers.[h]The contractor shall abide by the latest Labour Rules and Minimum Wages Act.[i] Wages paid by the contractor to the persons employed shall not be less than the minimum wages fixed by State / Central Government from time to time whichever is higher. The contractor shall also insure the workmen employed on the job.[j] The contractor is responsible for Insurance, EPF, ESI, Gratuity, Bonus, Labour Welfare Cess etc., as applicable and shall be paid to the Workmen as per existing Labour Rules / Acts / Regulations and rate quoted shall be deemed to be included for the same. |
| 4 | [k] INSURANCE AND DRESS CODE: The contractor shall provide the workmen with Dark Blue Colour Uniform [Formal Pant & T-Shirt] with labels showing / printed i.e. \"Name of the Firm and Designation\" on Front and \"GE [U - I] [V]\" on theback of the T-Shirt along with protective clothing / gear. The contractor shall also provide shoes to the workers and the persons shall not be allowed to enter the work site without wearing shoes.[l] The contractor shall be responsible for all Accidents / Injuries happening to the workmen. Any accident causing Minor / Fatal Injury, Partial Disability due to any untoward incident or non-adherence to Safety and IE Regulations or fault in maintaining of Lifts System / Safety Mechanism or on account of any mishandling / wrong operation / lack of knowledge of safety precautions or on account of any circumstances beyond his/their control, the contractor shall be solely responsible for settling all claims of compensation to the deceased, failing which department will have a right to recover any sum indicated / claimed by Labour Commissioner / Court authorities. No claim whatsoever will be entertained in this regard. No compensation is payable by the department on this account. Contractor shall provide first aid boxes to meet any emergency situations.[m] The contractor shall carryout the comprehensive maintenance of the lifts catered under subject work through the Original Equipment Manufacturer of that lift or from their accredited / authorised agencies only. The lowest bidder shall submit MoU from the Original Equipment Manufacturer of the Lift or from their accredited / authorised agencies to provide technical support, trained persons for maintenance & testing and spares before commencement of the work to GE. The spares shall be of the make as per existing or as per the OEM. |
| 5 | Supply only APLCD R4 PCB Mother Board for 10 Passengers lift/ goods lift (2000Kg) complete all as specified and as directed. |
| 6 | Supply only Main Contactor with Coil, 60 Amps , Power Contactor with 2 NO + 2NC Auxiliary Contacts and with 230 Volts, DC Coil complete all as specified and as directed. |
| 7 | Supply only Power Contactor, 32 Amps with 02 No + 2 NC Auxiliary Contacts with 230 Volts AC / 110 Volts DC complete all as specified and as directed. |
| 8 | Supply only Trailing Cable 12 Core X 0.75 Sq.mm complete all as specified and as directed. |
| 9 | Supply only Microprocessor L 40 BWA Logic Control Unit complete all as specified and as directed. |
| 10 | Supply only Input Module 24 Volts DC I/P or Potential Free Relay O/P Contact to match with Micrologix 1200 complete all as specified and as directed. |
| 11 | Supply only Full Length Infrared Sensor 64 Beams for Car Door including Transmitter, Receiver and Control Unit working on 230 Volts, AC complete all as specified and as directed. |
| 12 | Supply only Converter Card of Automatic Rescue Device to Convert 72 Volts DC Input to 24 Volts DC Output for Control Circuit complete all as specified and as directed. |
| 13 | Supply only Mosfet Card of Automatic Rescue Device to covert 72 Volts DC to 230 Volts AC 3 Amps Rating complete all as specified and as directed. |
| 14 | Supply only Rotary Encoder 1024 Pulse for Speed feedback of Main Drive complete all as specified and as directed. |
| 15 | Supply only Door Motor with Built-in Rotary Encoder and suitable VVVF Drive for Car Door operation complete all as specified and as directed. |
| 16 | Supply only VVVF Drive 11 KW to 15 KW for Lift Motor of 9 KW to 11 KW including feeding all parameters and interfacing with Controller Micro Processor and Drive including setting of basic parameters to obtain the desired and designed value of various motions of the lift complete all as per manufacturer\"s instructions, complete all as specified and as directed. [a] Input Voltage: 380 to 460 Volts[b] Phase: 3 Phase [c] Motor Power in KW: 11 KW [d] Capacity in KVA: 55.04 KVA |
| 17 | Supply only Gear Box suitable for 8 Passenger Lifts with 1.5 MPS Serving G+14 Floors with a travel of 30 Metres along with Traction Sheave and testing all as per manufacturer’s instructions complete all as specified and as directed. |
| 18 | Supply only COP made out of AISI 304 Grade Stainless Steel Sheet of minimum 1.5 mm thick including Buttons G+14, Lock, all other relevant features and wiring complete all as specified and as directed. |
| 19 | Supply only LOP made out of AISI 304 Grade Stainless Steel Sheet of minimum 1.5 mm thick, including Buttons G+14, Lock, all other relevant features and wiring complete all as specified and as directed. |
| 20 | Supply only over speed governer pully assembly with rope suitable for 8/10/13 passenger lifts with 1.5 Mps serving upto G+14 with a travel of upto 45 meters for mechanical safety complete all as specified and as directed. |
| 21 | Supply only over speed governer pully with rope suitable for 2000 Kg goods lifts with 0.5 Mps serving upto G+14 with a travel of upto 45 meters for mechanical safety complete all as specified and as directed. |
| 22 | Supply only over speed governer pully with rope suitable for 1000 Kg goods lifts with 0.5 Mps serving upto G+5 with a travel of upto 18 meters for mechanical safety complete all as specified and as directed. |
| 23 | Supply only Stainless steel false ceiling suitable for 8/ 10 Passenger lift, made out of 0.8mm thick AISI Grade Stainless steel sheets including provision of 4 Nos. of 8 Watt LED downlights and 01 No. of fan grillcomplete all as specified and as directed. |
| 24 | Supply only Main motor sheave four groves and 540 mm dia, speed 1.5m/s for passenger lifts complete all as specified and as directed. |
| 25 | Supply only Main motor sheave four groves and 640 mm dia, speed 0.5m/s for goods lifts complete all as specified and as directed. |
| 26 | Supply only Defelector Pulley five groves and 540 mm dia for passenger lifts complete all as specified and as directed. |
| 27 | Supply only Main Hoist Steel Rope of size 13 mm, Heavy Duty complete all as specified and as directed. |
| 28 | Supply only Micro Processor based Controller panel for full collective operation to match existing Auto Door Lift including software development complete all as to match existing centre opening/ one side opening lifts up to G+14 Floor including Input Output Modules complete all as specified and as directed. |
| 29 | Supply only Charger Card of Automatic Rescue Device 230 Volts Input/72 Volts Output complete all as specified and as directed. |
| 30 | Supply only Floor Relay Oscillator Switch, Optical type working on 12/24 Volts, DC complete all as specified and as directed. |
| 31 | Supply only Power Contactor 32 Amps with 24/48 Volts DC Coil complete all as specified and as directed. |
| 32 | Supplying, installing, testing and commissioning of Automatic Rescue Device of Microprocessor based control with VVVF Drive, Thoshiba compatible, ISI marked for Power Control, Battery backup of 72 Volts with Battery Charging Unit / Circuit, Inverter Circuits with Transformer for break door control 12V, 72 AH batteries in 06 Nos including provision of all indications like Battery Charging, Rescue Operations ON / OFF, Lift Moving Up / Down, Safety complete Lift at floor shall be on front panel including necessary power and control wiring between existing controller and ARD for the safe and satisfactory operation of the ARD suitable for 8/10 Passenger Lift (544Kg / 680Kg) of multi-storeyed Buildings up to G+14 Floors including taking down existing unserviceable ARD complete all as specified and as directed. |
| 33 | Supplying, installing, testing and commissioning of Automatic Rescue Device of Microprocessor based control with VVVF Drive, Thoshiba compatible, ISI marked for Power Control, Battery backup of 72 Volts with Battery Charging Unit / Circuit, Inverter Circuits with Transformer for break door control 12V, 72 AH batteries in 06 Nos including provision of all indications like Battery Charging, Rescue Operations ON / OFF, Lift Moving Up / Down, Safety complete Lift at floor shall be on front panel including necessary power and control wiring between existing controller and ARD for the safe and satisfactory operation of the ARD suitable for Goods Lift (2000Kg) of multi-storeyed Buildings up to G+14 Floors including taking down existing unserviceable ARD complete all as specified and as directed. |
| 34 | Supply and fix 1.5mm thick homogeniousPVC sheets,any pattern/ colour, fixed with approved rubber based adhesive as in floors complete all as specified and as directed. |
