Tender For Different Civil Works Of Kolkata Metropolitan Library Kolkata, kolkata-West Bengal

Different Civil Works Of Kolkata Metropolitan Library Kolkata- 1 Stripping Off Worn Out Plaster And Raking Out Joints Of Walls, Celings Etc. Upto Any Height And In Any Floor Including Removing Rubbish Within A Lead Of 75M As Directed. 2 Uprooting And Removing Plants From The Surface Of Walls Parapet Etc And Making Good Damages. ( Repairing Of Damages To Be Paid Separately. ( A ) Small Plant Of Girth Of Exposed Stem Upto 75 Mm. Lift Upto 6 Mtr. 3 ( B ) Medium Size Plant Of Girth Of Exposed Stem Above 75 Mm. But Not Exceeding 150 Mm. Lift Upto 6 Mtr. 4 ( C ) Large Plant Of Girth Of Exposed Stem Above 150 Mm. But Not Exceeding 225 Mm. Lift Upto 6 Mtr. 5 Taking Out Mirzapur Or Glazed Porcelain Tiles Carefully By Chiselling From Walls Or Floor Including Stacking Serviceablematerial As Directed. 6 ( A ) Applying 2 Coats Of Bonding Agent With Synthetic Multi Functional Rubber Emulsion Having Adhesive And Water Proofing Properties By Mixing With Water In Proportion ( 1 Bonding Agent : 4 Water : 6 Cement ) As Per ManufacturerSspecification [ Cement To Be Supplied By The Department ] 7 Plaster ( To Wall, Floor, Ceiling Etc. ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding / Staging Where Necessary ( Ground Floor ) . [ Excluding Cost Of Chipping Over Concrete Surface ] Vide Sl No-2, ( I ) With 1:6 Cement Mortar, ( C ) 15 Mm Thick Plaster, External Wall In Ground Floor 8 In 1St Floor 9 In 2Nd Floor 10 In 3Rd Floor 11 In 4Th Floor 12 In 5Th Floor 13 ( B ) 20 Mm Thick Plaster Inside Wall In Ground Floor 14 In 1St Floor 15 In 2Nd Floor 16 In 3Rd Floor 17 In 4Th Floor 18 In 5Th Floor 19 ( Ii ) With 1:4 Cement Mortar ( C ) 10 Mm Thick Plasterin Ground Floor 20 In 1St Floor 21 In 2Nd Floor 22 In 3Rd Floor 23 In 4Th Floor 24 In 5Th Floor 25 B ) Filling In Foundation Or Plinth By Fine Sand In Layers Not Exceeding 150 Mm As Directed And Consolidating The Same By Thorough Saturation With Water, Ramming Complete Including The Cost Of Supply Of Sand. ( Payment To Be Made On Measurement Of Finished Quantity ) 26 Supplying And Laying Polythene Sheet ( 150Gm / Sq.M. ) Over Damp Proof Course Or Below Flooring Or Roof Terracing Or In Foundation Or In Foundation Trenches. 27 Ordinary Cement Concrete ( Mix 1:2:4 ) With Graded Stone Chips ( 20 Mm Nominal Size ) Excluding Shuttering And Reinforcement, If Any, In Ground Floor As Per Relevant Is Codes. In Ground Floor 28 In 1St Floor 29 In 2Nd Floor 30 In 3Rd Floor 31 In 4Th Floor 32 In 5Th Floor 33 Supplying & Laying As Per Irc-Sp:063-2004 Paver Unit Of Any Shade Of Approved Quality As Per Relevant Is Code, Laid In Pattern As Directed In Pavement, Footpath, Driveway ( Paver Block Only ) , Etc Including Necessary Underlay Complete In All Respect With All Labour And Material. ( B ) 50 Mm Thick Interlocking Designer Concrete Paver Block M 30 Grade For Non-Traffic Parks, Domestic Drive As Per Is: 15658-2006 ( Over 20-30 Mm Medium Sand Bed On 200Mm Thk Boundgnaular / Granular Base Course Including Cost Of Sand For Sandbed But Excluding Cost Of Base Course & Subgradepreparation. ) 34 Brick Work With 1St Class Bricks In Cement Mortar ( 1:6 ) In 1St Floor 35 In 1St Floor 36 In 2Nd Floor 37 In 3Rd Floor 38 In 4Th Floor 39 In 5Th Floor 40 Supplying, Fitting & Fixing 1St Quality Ceramic Tiles In Walls And Floors To Match With The Existing Work & 4 Nos. Of Key Stones ( 10Mm ) Fixed With Araldite At The Back Of Each Tile & Finishing The Joints With White Cement Mixed With Colouring Oxide If Required To Match The Colour Of Tiles Including Roughening Of Concrete Surface, If Necessary Or By Synthetic Adhesive & Grout Materials Etc.With Sand Cement Mortar ( 1:3 ) 15 Mm Thick & 2 Mm Thick Cement Slurry At Back Side Of Tiles Using Cement @ 2.91 Kg / Sq.M & Joint Filling Using White Cement Slurry @ 0.20Kg / Sq.M. In Ground Floor 41 In 1St Floor 42 In 2Nd Floor 43 In 3Rd Floor 44 In 4Th Floor 45 In 5Th Floor 46 With Sand Cement Mortar ( 1:4 ) 20 Mm Thick & 2 Mm Thickcement Slurry At Back Side Of Tiles Using Cement @ 2.91Kg / Sq.M & Joint Filling Using White Cement Slurry @0.20Kg / Sq.M. ( B ) Area Of Each Tile Above 0.09 Sq.M In Ground Floor 47 In 1St Floor 48 In 2Nd Floor 49 In 3Rd Floor 50 In 4Th Floor 51 In 5Th Floor 52 Supplying, Fitting And Fixing Marble Slab / Tile Of 15 To 18 Mm Thickness In Floor, Lobby, Stair, Landing & Treads Etc. Over 20 Mm ( Av. ) Thck Base Of Cement Mortar ( 1:2 ) Laid With Whitecement Slurry @ 4.4 Kg / Sq.M Before Placing Marble & Jointedwith White Cement Slurry @ 2.0 Kg / Sq.M With Necessary Pigments Including Grinding And Granite Polishing As Perdirection Of Engineering -In -Charge In Ground Floor ( B ) With Chawk Dungriin Ground Floor 53 In 1St Floor 54 In 2Nd Floor 55 In 3Rd Floor 56 In 4Th Floor 57 In 5Th Floor 58 Supplying, Fitting & Fixing Granite Slab 15 Mm To 18 Mm Thick In Floor, Lobby, Stair, Landing And Treads Etc. Over 20 Mm ( Avg ) Thick Base Of Cement Morter ( 1:2 ) Laid With White Cement Slurry @ 4.40 Kg Per Square Meter Before Placing Of Granite And Jointed With White Cement Slurry @ 2.0 Kg Per Square Meter With Necessary Pigments And Complete As Per Direction Of Engineer-In-Charge Including Cost Of All Materials, Labours, Curing And Roughening Of Concrete Surface Complete. In Ground Floor 59 In 1St Floor 60 In 2Nd Floor 61 In 3Rd Floor 62 In 4Th Floor 63 In 5Th Floor 64 Supplying, Fitting And Fixing Fibre Reinforced Polymer ( Frp ) Composite Door Frame As Per Approved Section With Glass Fibre Reinforced Plastic Moulded Skins And A Special Sandwich Core, So As To Impart Monolitaheic Composite Structure As Per Approved Technology Of Department Of Science And Technology ( Dst ) To Safisfy Is: 4020 Door Testing Performance Criteria. ( I ) 66Mm X 90Mm 65 Supplying, Fitting & Fixing Fibre Reinforced Polymer ( Frp ) Composite Door Shutters As Per Approved Design With Glass Fibre Reinforced Plastic Moulded Skins And A Special Sandwich Core, So As To Impart Monolitaheic Composite Structure As Per Approved Technology Of Department Of Science And Technology ( Dst ) To Satisfy Is:4020 Door Testing Performance Criteria. In Ground Floor. In Ground Floor 66 In 1St Floor 67 In 2Nd Floor 68 In 3Rd Floor 69 In 4Th Floor 70 In 5Th Floor 71 Supplying Profiles Of Required Section Made Of Aluminium Alloy Extrusions Conforming To Is: 732-1983 And Is: 1285- 1975; Annodized ( With Required Film Thickness And Specified Colour / Natural ) Matt Finished I ) Bottom Frame 72 Ii ) Top And Side Frame. 73 D ) Shutter For All Track Sliding Window.I ) Bottom & Top Member 74 Ii ) Style Side Member 75 Iii ) Interlock Member 76 Labour Charge For Fabrication And Installation Of Composite Door, Window, Partitions Made From Annodized Extruded Alloy Aluminium Sections For The Following Units:- ( A ) Glazed Aluminium Sliding Windows Made Of Extruded And Annodized Alloy Aluminium Sectios, Fabrications, Including Cutting To Proper Shape And Size, Drilling And Aligning Of Window Shutter Frame Fitted With In Built Locking Arrangements, Sliding Rollers And Other Necessary Fittings, Fixture, Adhesives And Joineries Along With Extruded Neoprine Or Epdm In Ground Floor 77 In 1St Floor 78 In 2Nd Floor 79 In 3Rd Floor 80 Supplying Pvc Rollers For Sliding Windows As Per Direction Of Engineer In Charge. 81 Supplying Maruti Lock ( 100Mm ) 82 Supplying Epdm Gusket Of Approved Make And Brand As Per Direction Of I ) For Sliding Windowsa ) T Shaped Epdm Gasket For Frames 83 B ) U Shaped Epdm Gasket For Frames 84 Supplying Bubble Free Float Glass Of Approved Make And Brand Conforming To Is: 2835-1987. Iv ) 5Mm Thick Coloured / Tinted / Smoke Glass 85 ( A ) M.S.Or W.I. Ornamental Grill Of Approved Design Joints Continuously Welded With M.S, W.I. Flats And Bars Of Windows, Railing Etc.Fitted And Fixed With Necessary Screws And Lugs In Ground Floor. 86 In 1St Floor 87 In 2Nd Floor 88 In 3Rd Floor 89 Supplying, Fitting And Fixing M.S. Clamps For Door And Window Frame Made Offlat Bent Bar, End Bifurcated With Necessary Screws Etc. By Cement Concrete ( 1:2:4 ) As Per Direction. ( Cost Of Concrete Will Be Paid Separately ) ( C ) 40Mm X 6Mm, 125Mm Length Toilet Doors 90 Anodised Aluminium Butt Hinges Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification ( I.S. 205 / 66 ) And Fitted And Fixed With Cadmium Plated Screws: ( Ix ) 125 X 75 X 4.0Mm Toilet Doors 91 Anodised Aliminium D-Type Handle Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification ( I.S. 230 / 72 ) Fitted And Fixed Complete: 92 Anodised Aluminium Barrel / Tower / Socket Bolt ( Full Covered ) Of Approved Manufactured From Extruded Section Conforming To I.S. 204 / 74 Fitted And Fixed With Cadmium Plated Screws: ( V ) 150Mm Long X 12Mm Dia. Bolt. Toilet Doors 93 Anodised Aluminium Aldrop / Sliding Bolts Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification ( I.S. 2681 / 66 ) Fitted Andfixedcomplete. ( I ) 250Mm X 16Mm Dia Bolt.Toilet Doors 94 Applying Decorative Cement Based Paint Of Approved Quality After Preparing The Surface Including Scraping The Same Thoroughly ( Plastered Or Concrete Surface ) As Per ManufacturerS Specification. ( Ii ) One Coat On New Surface In Ground Floor 95 In 1St Floor 96 In 2Nd Floor 97 In 3Rd Floor 98 In 4Th Floor 99 In 5Th Floor 100 Applying Exterior Grade Acrylic Primer Of Approved Quality And Brand On Plastered Or Cencrete Surface Old Or New Surface To Receive Decorative Textured ( Matt Finish ) Or Smooth Finish Acrylic Exterioremulsion Paint Including Scraping And Preparing The Surface Throughly, Complete As Per ManufacturerS Specification And As Per Direction Of The Eic. ( A ) One Coat In Ground Floor 101 In 1St Floor 102 In 2Nd Floor 103 In 3Rd Floor 104 In 4Th Floor 105 In 5Th Floor 106 Protective And Decorative Acrylic Exterior Emulsion Paint Of Approved Quality, As Per ManufacturerS Specification And As Per Direction Of Engineer-In-Charge To Be Appliedver Acrylic Primer As Required.The Rate Includes Cost Of Material, Labour, Scaffolding And All Incidental Charges But Excluding The Cost Of Primer. In Ground Floor ( Two Coat ) 107 In 1St Floor 108 In 2Nd Floor 109 In 3Rd Floor 110 In 4Th Floor 111 In 5Th Floor 112 Rendering The Surface Of Walls And Ceiling With White Cement Base Water Proof Wall Putty Of Approved Make & Brand. ( 1.5 Mm Thick ) .Toilet Block Inside Wall 113 Applying Interior Grade Acrylic Primer Of Approved Quality And Brand On Plastered Or Cencrete Surface Old Or New Surface To Receive Distemper / Acrylic Emulsion Paint Including Scraping And Preparing The Surface Throughly, Complete As Per ManufacturerS Specification And As Per Direction Of The Eic. ( In Ground Floor ) Toilet Block Inside Wall One Coat 114 Applying Acrylic Emulsion Paint Of Approved Make And Brand On Walls And Ceiling Including Sand Papering In Intermediate Coats Including Putty ( To Be Done Under Specific Instruction Of Superintending Engineer ) : ( Two Coats ) 115 ( A ) Priming One Coat On Steel Or Other Metal Surface With Synthetic Oilbound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. 116 B ) Priming One Coat On Timber Or Plastered Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. 117 ( A ) Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary : ( A ) On Timber Or Plastered Surface : With Super Gloss ( Hi-Gloss ) - ( Iv ) Two Coats ( With Any Shade Except White ) 118 ( B ) On Steel Or Other Metal Surface : With Super Gloss ( Hi-Gloss ) - ( Iv ) Two Coats ( With Any Shade Except White ) 119 Cutting Chase Upto 125 X 150 Mm. And Subsequent Mending Of Damages. ( A ) In Brick Wall [ Cement-3.6 Kg / Mtr ] 120 Application Of Priming Coat For Standard Bituminous Aterproofing Treatment Over Flat Roof With Bitumen Primer Of Approved Brand Fufilling The Provision Of I.S. 1346 - 1991 & 3384 - 1986 Applied @ 0.27 Liters / Sq.M. Over Clean And Prepared Roof Surface Complete As Per Satisfaction Of The Engineer - In - Charge. 121 Supplying & Laying 3Mm Thick Pre-Fabricated Plastomeric Water Proofing Membrane Conforming To En 12311-1 & Astmd 5147, Manufactured With Atactic Poly Propylene ( App ) Modified Premium Grade Asphalt , Specially Reinforced With Non-Woven Polyester Core With Polyester Reinforcement @160 Gms Per Sqm 122 G.I. Rain Water Spout 75 Mm. Dia. And 600 To 750 Mm. Long Supplied Fitted And Fixed Complete With Two Coats Of Paint To Both Exposed Portion. 123 Supplying, Fitting And Fixing In Position G.I. Pipes Of Tata Make For Underground Works With All Necessary Accessories, Specials Viz.Socket, Bend, Tee, Union, Cross, Elbow, Nipple, Short Piece Etc.Including Cost Of All Materials, Jointing Materials , Cutting Pipes, Making Threads, Cutting Trenches Upto 1.5 Metre Below Surface In All Sorts Of Soil And Refilling The Same As Directed With Two Coats Of Painting On G.I. Pipes And Specials With Bituminous Paint Complete In All Respect. ( Payment Will Be Made On The Centre Line Measurement Of The Total Pipe Line Including All Specials No Separate Payment Will Be Made For Accessories, Specials. Payment For Painting Will Be Made Seperately ) ( V ) 40 Mm Dia. Medium Quality 124 ( Vi ) 50 Mm Dia. Medium Quality 125 Supplying, Fitting And Fixing Shower Of Approved Brand And Make. ( B ) Chromium Plated Rose Shower With Revolving Joint And 150 Mm Long Shower Arm ( Equivalent To Code No. 5489 & Model - Florentine Of Jaquar Or Similar Brand ) . 126 ( E ) Chromium Plated Double Coat Hook ( Equivalent To Code No. 35761 & Model - Kubix Of Jaquar Or Similar ) . 127 F ) Hand Shower ( Health Faucet ) With 1 Mtr Fexible Tube With Wall Hook ( Equivalent To Code No.573 & Model -Allied Of Jaquar Or Similar ) . 128 Supplying, Fitting And Fixing PeetS Valve Fullway Gunmetal Standard Pattern Best Quality Of Approved Brand Bearing I.S.I. Marking With Fittings ( Tested To 21 Kg Per Sq. Cm. ) . ( Iv ) 50 Mm Dia 129 ( V ) 40 Mm Dia 130 ( Vii ) 25 Mm Dia 131 ( A ) ( Ii ) Chromium Plated Bib Cock Long Body With Wall Flange With Aerator ( Equivalent To Code No. 512 & Model - Tropical / Sumthing Special Of Essco Or Similar Brand ) 132 ( E ) Ptmt ( Polytetra Bib Cock / Stop Cock ( Prayag Or Equivalent ) 133 Supplying & Laying Double Wall Corrugated ( With External Annular Corrugation And Smooth Internal Walls ) High Density Polyethelene Pipes Conforming To Is 16098 ( Part-Ii ) :2013 Having Stiffness Class Of Sn 8 With Ring Stiffness Not Less Than 8.00 Kn / Sqm. And Impact Resistance Tir Value Not More Than 10% Including Necessary Jointing Materials For Non Pressure Underground Drainage, Sewerage & Cross Drainage Application. ( Ii ) 200 Mm Internal Dia. 134 ( Iii ) 250 Mm Internal Dia. 135 Supplying, Fitting And Fixing Pvc Pipes Of Approved Make Of Schedule 80 ( Medium Duty ) Conforming To Astmd - 1785 And Threaded To Match With Gi Pipes As Per Is : 1239 ( Part - I ) . With All Necessary Accessories, Specials Viz. Socket, Bend, Tee, Union, Cross, Elbo, Nipple, Longscrew, Reducing Socket, Reducing Tee, Short Piece Etc. Fitted ( B ) For Concealed Workpvc Pipes 15Mm 136 20Mm 137 25Mm 138 Supply , Fitting & Fixing Of Pvc Bottle Waste Tap Ii ) 40 Mm 139 Fittings Of Ambulant Disabled Toiletsupplying, Fitting And Fixing 10 Litre White Glazed Vitreous Chinaware Of Approve Low-Down Cistern Of Approved Make With Either Side Or Bottom Inlet, Side Overflow, Brackets Complete With All Internal Fittings. ( Model Code No. S1060106 Of Cera Or Equivalent. ) White 140 Supplying, Fitting And Fixing White Vitreous China Best Quality Approved Make Wash Basin With C.I. Brackets On 75 Mm X 75 Mm Wooden Blocks, C.P. Waste Fittings Of 32 Mm Dia., One Approved Quality Brass C.P. Pillar Cock Of 15 Mm Dia., C.P. Chain With Rubber Plug Of 30 Mm Dia., Approved Quality P.V.C. Waste Pipe With C.P. Nut 32 Mm Dia., 900 Mm Long Approved Quality P.V.C. Connection Pipe With Heavy Brass C.P. Nut Including Mending Good All Damages And Painting The Brackets With Two Coats Of Approved Paint. ( Iii ) 630 Mm X 450 Mm Size 141 Supplying, Fitting And Fixing Flat Back Urinal ( Half Stall Urinal ) In White Vitreous Chinaware Of Approved Make In Position With Brass Screws On 75 Mm X 75 Mm X 75 Mm Wooden Blocks Complete. ( I ) 635 Mm X 395 Mm X 420 Mm 142 Suppling, Fitting And Fixing Wall Hung Type Water Closet ( European Type ) Size - 500X360x350 Mm Of White Glazed Vitreous Chinaware Of Approved Make And Brand In Position Complete With Necessary Nut And Boalts ( Model Carat Of Cera Or Equivalent. ) . 143 Supplying, Fitting And Fixing Squating Plate With Integral Flushing In White Vitreous Chinaware Of Approved Make In Cement Concrete ( 6:3:1 ) With Jhama Chips Complete. ( Payment Of Concrete Will Be Paid Seperately ) . ( I ) 450 Mm X 350 Mm 144 Supplying, Fitting And Fixing Half Round Channel With Or Without Outlet As Required Set In Cement Concrete ( 6:3:1 ) With Jhama Chips Complete. ( Payment Of Concrete Will Be Paid Seperately ) . ( Ii ) 600 Mm X 150 Mm ( B ) White Vitreous Chinaware 145 Supplying, Fitting And Fixing Closet Seat Of Approved Make With Lid And C.P. Hinges, Rubber Buffer And Brass Screws Complete. ( A ) E.W.C ( Iv ) Bestolite ( Solid Type ) White 146 Supplying, Fitting And Fixing 32 Mm Dia. Flush Pipe Of Approved Make With Necessary Fixing Materials And Clamps Complete.Ii ) C. P. Flush Pipe 147 Supplying, Fitting And Fixing Urinal Flush Pipe Fittings Of Approved Brand ( A ) C.P. Urinal Flush Pipe Fittings Range Of One 148 Supplying, Fitting And Fixing Glass Shelf With Aluminium Guard Rails. ( A ) Ordinary Type With 5.5 Mm Sheet Glass ( Ii ) 600 Mm X 125 Mm 149 Supplying, Fitting And Fixing Liquid Soap Container. ( A ) Cromium Plated. 150 Supplying, Fitting And Fixing Towel Rail With Two Brackets. ( A ) C.P. Over Brass ( Iii ) 25 Mm Dia. And 750 Mm Long 151 Supplying, Fitting And Fixing Bib Cock Or Stop Cock. ( B ) ( I ) Chromium Plated Stop Cock ( Equivalent To Code No. 513 ( A ) & 513 ( B ) & Model - Tropical / Sumthing Special Of Essco Or Similar 152 ( D ) ( I ) Chromium Plated Angular Stop Cock With Wall Flange ( Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand ) . 153 Supplying, Fitting And Fixing Approved Brand P.V.C. Connector White Flexible, With Both Ends Coupling With Heavy Brass C.P. Nut, 15 Mm Dia. ( V ) 900 Mm Long 154 Supplying, Fitting And Fixing Approved Brand 32 Mm Dia.P.V.C. Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps. ( Iv ) 1050 Mm Long 155 Supply Of Upvc Pipes ( B Type ) & Fittings Conforming To Is-13592-1992 A ( Ii ) Double Socketed 3 Meter Length ( A ) 75 Mm 156 ( B ) 110 Mm 157 ( C ) 160 Mm 158 B ) Fittings : ( Iii ) Door Tee ( A ) 75 Mm 159 ( B ) 110 Mm 160 ( C ) 160 Mm 161 V ) Plain Y ( A ) 75 Mm 162 ( B ) 110 Mm 163 ( C ) 160 Mm 164 X ) Bend 87.5º ( A ) 75 Mm 165 ( B ) 110 Mm 166 ( C ) 160 Mm 167 Xv ) Vent Cowl ( A ) 75 Mm 168 ( B ) 110 Mm 169 ( C ) 160 Mm 170 Xxi ) 110 X 110 P Trap ( A ) 75 Mm 171 Xxxi ) Plain Floor Trap With Top Tile & Strainer ( A ) 75 Mm 172 Xvi ) Pipe Clipng ( A ) 75 Mm 173 ( B ) 110 Mm 174 ( C ) 160 Mm 175 Xvii ) W.C. Connector ( 150 Mm Long ) 125 X 110 ( W / Wc Ring ) ( A ) 75 Mm 176 C ) Rubber Lubricant 177 D ) Solvent Cement 178 Labour For Fitting And Fixing U.P.V.C. Pipes For Above Ground Workincluding Cost Of Jointing Materials Etc. Fitting And Fixing All Necessary Specials, Cutting Pipes, Cutting Holes In Walls Or R.C. Floor Where Necessary And Mending Good All Damages Excluding The Cost Of Masonry Or Concrete ( A ) Above Ground ( I ) 75 Mm Dia 179 ( Ii ) 110 Mm Dia 180 ( Iii ) 160 Mm Dia 181 Supplying, Fitting And Fixing Bevelled Edged Mirror 5.5 Mm Thick Silver Red As Per I.S. 3438 / 1965 Together With Brass C.P. Hinges. ( Ii ) 600 Mm X 450 Mm 182 Supplying, Fitting And Fixing Yard Gully With Approved H.C.I. Grating Complete. ( I ) 225 Mm X 150 Mm With 230 Mm Gratings 183 Supplying, Fitting & Fixing Cast Iron Soil Pipe Only Conforming To I.S. 3989 / 2009 And I.S. 1729 / 2002 With Bobbins, Nails Etc. Including Making Holes In The Wall, Floor Etc. And Cutting Trenches Etc. In Any Floor Through Masonry ( A ) With Valamoid Joints Including Sealing With Sand Cement Morter ( 4:1 ) Upto Quarter Depth. ( Ii ) 100 Mm Dia 184 Supplying, Fitting & Fixing H.C.I. Bend With Door Conforming To I.S.S.Including Jointing Complete And Painting Two Coats To The Exposed Surface With Approved Paint Complete. ( Payment Of Painting Will However Be Paid Seperately ) . ( A ) With Valamoid Joints Including Sealing The Top With Cement Mortar ( 4:1 ) ( Ii ) 100 Mm Dia 185 ( A ) H.C.I. Bell Mouth Plain Trap Supplied, Fitted And Fixed With Lead Jointing Complete 100 Mm Dia And Painting Two Coats To The Exposed Surface With Approved Paint Complete. ( Payment Of Painting Will However Be Paid Seperately ) . 186 Supplying, Fitting & Fixing Aluminium Domical Grating ( I ) 150 Mm 187 Supplying, Fitting And Fixing In Position Reinforced Cement Polymer Concrete Manhole / Gully Pit Cover With Matching Frame.As Per I.S-12592 ( M.D ) ( Ii ) 25 Mt Load Bearing Capacity Round Manhole Cover Provided With Two Lifter Hooks Fitted With Matching Frame Of Sizecover: 680 Mm X 90 Mm Frame: 800 Mm X 165 Mm 188 Add Gstin Charges @ 18% 189 Add Cess@1%

Refer document

INR 118551.0 /-

INR 59.27 Lakhs /-

Name of Work :Different Civil Works of Kolkata Metropolitan Library, Kolkata.

Sl. No.	Item Description
1	Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
2	Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately. (a) Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr.
3	(b) Medium size plant of girth of exposed stem above 75 mm. but not exceeding 150 mm. lift upto 6 mtr.
4	(c) Large plant of girth of exposed stem above 150 mm. But not exceeding 225 mm. lift upto 6 mtr.
5	Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed.
6	(a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer"s specification [Cement to be supplied by the Department]
7	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]Vide Sl No-2,(i) With 1:6 cement mortar, (c) 15 mm thick plaster, External Wall In Ground Floor
8	In 1st Floor
9	In 2nd Floor
10	In 3rd Floor
11	In 4th Floor
12	In 5th Floor
13	(b) 20 mm thick plaster Inside Wall In Ground Floor
14	In 1st Floor
15	In 2nd Floor
16	In 3rd Floor
17	In 4th Floor
18	In 5th Floor
19	(ii) With 1:4 cement mortar(c) 10 mm thick plasterIn Ground Floor
20	In 1st Floor
21	In 2nd Floor
22	In 3rd Floor
23	In 4th Floor
24	In 5th Floor
25	B) Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
26	Supplying and laying Polythene Sheet (150gm/sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
27	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. In Ground Floor
28	In 1st Floor
29	In 2nd Floor
30	In 3rd Floor
31	In 4th Floor
32	In 5th Floor
33	Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material.(b) 50 mm thick interlocking designer concrete paver block M 30 grade for non-traffic parks,domestic drive as per IS: 15658-2006(over 20-30 mm medium sand bed on 200mm thk boundgnaular /granular base course including cost of sand for sandbed but excluding cost of base course & subgradepreparation.)
34	Brick work with 1st class bricks in cement mortar (1:6)In 1st Floor
35	In 1st Floor
36	In 2nd Floor
37	In 3rd Floor
38	In 4th Floor
39	In 5th Floor
40	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. In Ground Floor
41	In 1st Floor
42	In 2nd Floor
43	In 3rd Floor
44	In 4th Floor
45	In 5th Floor
46	With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m In Ground Floor
47	In 1st Floor
48	In 2nd Floor
49	In 3rd Floor
50	In 4th Floor
51	In 5th Floor
52	Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with whitecement slurry @ 4.4 kg/Sq.m before placing marble & jointedwith white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as perdirection of Engineering -in -Charge in Ground Floor (b) With Chawk DungriIn Ground Floor
53	In 1st Floor
54	In 2nd Floor
55	In 3rd Floor
56	In 4th Floor
57	In 5th Floor
58	Supplying,fitting & fixing granite slab 15 mm to 18 mm thick in floor, lobby, stair, landing and treads etc. over 20 mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40 Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. In Ground Floor
59	In 1st Floor
60	In 2nd Floor
61	In 3rd Floor
62	In 4th Floor
63	In 5th Floor
64	Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria. (i) 66mm x 90mm
65	Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor. In Ground Floor
66	In 1st Floor
67	In 2nd Floor
68	In 3rd Floor
69	In 4th Floor
70	In 5th Floor
71	Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished i) Bottom frame
72	ii) Top and side frame.
73	d) Shutter for all track sliding window.i) Bottom & Top member
74	ii) Style side member
75	iii) Interlock member
76	Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM In Ground Floor
77	In 1st Floor
78	In 2nd Floor
79	In 3rd Floor
80	Supplying PVC rollers for sliding windows as per direction of Engineer in charge.
81	Supplying maruti lock (100mm)
82	Supplying EPDM gusket of approved make and brand as per direction of i) For sliding windowsa) " T" shaped EPDM gasket for frames
83	b) "U" shaped EPDM gasket for frames
84	Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. iv) 5mm thick coloured / tinted / smoke glass
85	(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etc.fitted and fixed with necessary screws and lugs in ground floor.
86	In 1st Floor
87	In 2nd Floor
88	In 3rd Floor
89	Supplying, fitting and fixing M.S. clamps for door and window frame made offlat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4)as per direction. (Cost of concrete will be paid separately) (c) 40mm X 6mm, 125mm Length Toilet doors
90	Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (ix) 125 x 75 x 4.0mm Toilet doors
91	Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
92	Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (v) 150mm long x 12mm dia. bolt. Toilet doors
93	Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted andfixedcomplete. (i) 250mm x 16mm dia bolt.Toilet doors
94	Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer"s specification. (ii) One coat on new surface In Ground Floor
95	In 1st Floor
96	In 2nd Floor
97	In 3rd Floor
98	In 4th Floor
99	In 5th Floor
100	Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterioremulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. (a) One Coat In Ground Floor
101	In 1st Floor
102	In 2nd Floor
103	In 3rd Floor
104	In 4th Floor
105	In 5th Floor
106	Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer"s specification and as per direction of Engineer-in-Charge to be appliedver acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)
107	In 1st Floor
108	In 2nd Floor
109	In 3rd Floor
110	In 4th Floor
111	In 5th Floor
112	Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick).Toilet block inside wall
113	Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. (In Ground Floor) Toilet block inside wall one coat
114	Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)
115	(a) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc.
116	b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
117	(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)
118	(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)
119	Cutting chase upto 125 x 150 mm. and subsequent mending of damages. (a) in brick wall [Cement-3.6 Kg/Mtr]
120	Application of priming coat for standard bituminous aterproofing treatment over flat roof with Bitumen primer of approved brand fufilling the provision of I.S. 1346 - 1991 & 3384 - 1986 applied @ 0.27 Liters /Sq.m. over clean and prepared roof surface complete as per satisfaction of the Engineer - in - Charge.
121	Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm
122	G.I. Rain water spout 75 mm. Dia. And 600 to 750 mm. Long supplied fitted and fixed complete with two coats of paint to both exposed portion.
123	Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials. Payment for painting will be made seperately) (v) 40 mm dia. medium quality
124	(vi) 50 mm dia. medium quality
125	Supplying, fitting and fixing shower of approved brand and make. (b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
126	(e) Chromium plated double coat Hook(Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).
127	f) Hand Shower(Health Faucet) with 1 mtr Fexible Tube with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
128	Supplying, fitting and fixing Peet"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iv) 50 mm dia
129	(v) 40 mm dia
130	(vii) 25 mm dia
131	(a)(ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
132	(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)
133	Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for non pressure underground Drainage, Sewerage & Cross drainage application. (ii) 200 mm internal dia.
134	(iii) 250 mm internal dia.
135	Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted (b) For Concealed WorkPVC Pipes 15mm
136	20mm
137	25mm
138	Supply , Fitting & Fixing of PVC Bottle waste tap ii) 40 mm
139	Fittings of Ambulant Disabled ToiletSupplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.) white
140	Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (iii) 630 mm X 450 mm size
141	Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(i) 635 mm X 395 mm X 420 mm
142	Suppling, fitting and fixing WALL HUNG TYPE water closet (European type) size - 500x360x350 mm of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (MODEL CARAT of CERA or equivalent.).
143	Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm
144	Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (ii) 600 mm X 150 mm(b) White vitreous chinaware
145	Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C (iv) Bestolite (solid type) white
146	Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.ii) C. P. Flush Pipe
147	Supplying, fitting and fixing urinal flush pipe fittings of approved brand (a) C.P. urinal flush pipe fittings range of one
148	Supplying, fitting and fixing glass shelf with aluminium guard rails.(a) Ordinary type with 5.5 mm sheet glass (ii) 600 mm X 125 mm
149	Supplying, fitting and fixing liquid soap container. (a) Cromium plated.
150	Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass (iii) 25 mm dia. and 750 mm long
151	Supplying, fitting and fixing bib cock or stop cock. (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
152	(d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
153	Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm long
154	Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iv) 1050 mm long
155	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 A (ii) Double Socketed 3 Meter Length (a) 75 mm
156	(b) 110 mm
157	(c) 160 mm
158	B)Fittings : (iii) Door Tee(a) 75 mm
159	(b) 110 mm
160	(c) 160 mm
161	v) Plain Y (a) 75 mm
162	(b) 110 mm
163	(c) 160 mm
164	x) Bend 87.5º(a) 75 mm
165	(b) 110 mm
166	(c) 160 mm
167	xv) Vent Cowl(a) 75 mm
168	(b) 110 mm
169	(c) 160 mm
170	xxi) 110 X 110 P Trap (a) 75 mm
171	xxxi) Plain Floor Trap with Top tile & Strainer(a) 75 mm
172	xvi) Pipe Clipng (a) 75 mm
173	(b) 110 mm
174	(c) 160 mm
175	xvii) W.C. Connector (150 mm long) 125 X 110(W/WC Ring)(a) 75 mm
176	C) Rubber Lubricant
177	D) Solvent Cement
178	Labour for fitting and fixing U.P.V.C. pipes for above ground workincluding cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete (A) Above ground (i) 75 mm dia
179	(ii) 110 mm dia
180	(iii) 160 mm dia
181	Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm
182	Supplying, fitting and fixing yard gully with approved H.C.I. grating complete. (i) 225 mm X 150 mm with 230 mm gratings
183	Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry (a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth. (ii) 100 mm dia
184	Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S.including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (a) With valamoid joints including sealing the top with cement mortar (4:1)(ii) 100 mm dia
185	(a) H.C.I. bell mouth plain trap supplied, fitted and fixed with lead jointing complete 100 mm dia and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).
186	Supplying, fitting & fixing Aluminium domical grating (i) 150 mm
187	Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S-12592(M.D) (ii) 25 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of sizeCover: 680 mm X 90 mm Frame: 800 mm X 165 mm
188	Add GSTIN Charges @ 18%
189	Add Cess@1%