Providing Paver Block Road And Construction Of Drain With Culvert Atward No: 8In Kalavai Town Panchayat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Mar 2024
0 days left
EMD
17000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalavai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Paver Block Road And Construction Of Drain With Culvert Atward No: 8In Kalavai Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Dismandling of Brick wallincluding cast of the labour charge and all other inclental charge etc… complete as per rate spm (SR No 11,Page No-10) |
| 2 | Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. Complying with Standard Specifications as per SS 20 BTNDSS No. 23 & 24 V,VI,S2 |
| 3 | Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with Standard Specifications as per TNDSS No. 28 V, VI (S2)(S5A) VII |
| 4 | Supplying and errecting centering to sides and soffits including supports and struttingfor drainage sides andculvert body wall sidesusing M.S Sheets of size90cm x 60cm and B.G 10stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete Complying with Standard Specification as per TNDSS No.90(S3),86,86A,V,VI,(S3),VII (For Drain,Deck slab & Retainingwall) |
| 5 | Reinforced Cement concrete M20 grade1:1.5 :3 (one part of cement one point fivepart of sand andthree part of aggregate )using 20mm gauge machine broken hard granite stone jelly for all RCCitemsof worksexcluding cost of TMT rod, centering , struuting but including cost of mixing placing the concrete in postionvibrating cosolidating finishing and curing the concrete etc complete complying the standard specifications TNDSS NO |
| 6 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size9 ” x 4 3/8 “x 2 3/4 ”from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 10 M3) |
| 7 | Supply and fixing by boisn panal door with Necessay Accessories and Locking Arrangements including cost and conveying of all materials amd labour charge etc..,complete as per standard specificatio |
| 8 | Plastering in Cement Mortor 1:3 Mix (one cement, Three sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specification |
| 9 | Supplying fabricating and placing in position of steel rods using TMT Steel rodincluding cost of binding wire, cost of labour charges for fabrication and placing in positionetc. Complete. Complying with std. specifications.TNDSS NO: 86 |
| 10 | Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated unsheathed Copper conductorcable of 1100 V grade on suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box 150mmx100mmx75mm for 5A 3 pin non interlocking flush type CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point |
| 11 | Supply and fixing by Ac exhast fan 300mm(12\") Heavy duty Part-B,2(b)Pag no 15 |
| 12 | Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with \"P\" or \"S\" trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition. |
| 13 | Supply and layaing partition of aluminium galzed partition with Necessay AccessoriesArrangements including cost and conveying of all materials amd labour charge etc..,complete as per standard specification |
| 14 | Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm sizeof approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc.Complete. |
| 15 | Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc. |
| 16 | Finishing the top of floor with Granolithic flooring with cement concrete 1:2:4 (one part cement, two part sand and four part aggrigate) using 10 to 12mm ISS HBG Chips from approved quarry to 25mm thick including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with Standard Specifications etc., Complete. as per TNDSS No.56 & 57 |
| 17 | Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specificationsfor 10 sqm |
| 18 | Supply and fixing of Eo and Chairman Chairs including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications |
| 19 | Providing Cub-board using termite / warer proof plywood of 19mm thick over which laminated sheet of 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work. |
AI Tender Summary
Tender Timeline
Mar 05, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 08, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 08, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender