|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 3 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 4 | Providing and painting with plastic Emulsion- paints two or more coats on new surface of required shade to give even shade in- including brushing the surface clean of all dirt, dust and smoothened by sand paper etc complete. |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 8 | Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 9 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 10 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) ANGULAR STOP COCK 15 MM DIA |
| 11 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) BIB COCK LONG BODY 15 MM DIA |
| 12 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 13 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. Brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 14 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete.740 x 20 mm |
| 15 | Providing and fixing Tower bolt 150x10 mm with necessary screws etc complete.Brass (Bright Finish) |
| 16 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 17 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 18 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia |
| 19 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0sqm of20mm thick laid over 20mm(average) 1:4cm thick bare laid cement concrete and joint treated with white cement ,mixed with matching pigment, curing including rubbing to give a granite finish,as per the direction o fEngineer in Charge and carriage of material up to work site, all complete. |
| 20 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.Size 300x16mm M.S (Bright Finish) |
| 21 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete.Brass (Chromium Plated) |
| 22 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) BIB COCK 15 MM DIA |
| 23 | Providing and Painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade i/c cleaning the surface complete on old surface. |
| 24 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) CONNECTING PIPE |
| 25 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 26 | Providing, Fitting and fixing brass fittings of approved quality and size complete:GATE WAY VALVE 20MM DIA |
| 27 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.100 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 28 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.75 mm dia. PRINCE / SUPREME soil Pipe |
| 29 | Providing, fitting and fixing. bends of various types plain or band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sandspipes.75 mm dia. Supreme / Prince |
| 30 | Providing, fitting and fixing. bends of various types plain or band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sandspipes.100 mm dia. Supreme / Prince |
| 31 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :20 mm dia |
| 32 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 33 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading. |
| 34 | Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete. |
| 35 | P/F stainless steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required.610 x 450 x 200 mm. |
| 36 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes |
| 37 | Providingandplacingonterracehighdensity polyethylenewaterstoragetankwithmanholelidand suitable locking arrangement including making holes for inlet,out letandballcockincludingtestingetc.all complete: (Sintex or equivalent)- 1000 Ltrs. Capacity. |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall -40 mm nominal outer dia Pipes. |
| 39 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore. |
| 40 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 41 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screwsetc. Complete : Single rubber stopper. |
| 42 | Applying one coat of water thinnable cement primer of Water thinnable cement primer. |
| 43 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL)-SHOWER ROSE WITHOUT ARM |
| 44 | Providing & Fitting Pedestal white colour for of Hind Vitreous wash basin complete. |
| 45 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge. Granite work. |
| 46 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 47 | Supply and erection of LED tube light Neptune silver 20 watt |
| 48 | Supply and erection of LED tube light Neptune Plus 10 watt |
| 49 | Supply and erection of LED LAMPS CONFORMING TO IS: 16102 (vi) LED Lamp 9 Watt |
| 50 | BRITO RECESSED MOUNTED LED DOWNLIGHT (SQUARE/ROUND) CONFORMING TO (iii) Brito 15 watt (CW/OW/WW) |
| 51 | Supply and erection of Ventilating fans 250mm 10\" (Havells) |
| 52 | Supply and erection of Ventilating fans 300mm 12\" (Havells) |
| 53 | Supply and erection of STORAGE WATER HEATER CONFORMING TO IS: 2082 (ii) Storage Water heater 25 ltrs. Racold make |
| 54 | Supply and erection of 5 METER LONG FLEXIBLE LED STRIP LIGHT IP -20/65 OF DIFFERENT COLOURS, (i) LED Strip 24 /25watt |
| 55 | Supply and erection of LED strip driver 24 watt |
| 56 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 57 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessedconduit as required.(i) 20mm |
| 58 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required.1 or 2 Module (75mmX75mm) |
| 59 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 3 Module (100mmX75mm) |
| 60 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required.4 Module (125mmX75mm) |
| 61 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 6 Module (200mmX75mm) |
| 62 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 8 Module (125mmX125mm) |
| 63 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 64 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Supply and erection of 5/6 A switch |
| 65 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Supply and erection of 3 pin 5/6 A socket outlet |
| 66 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Supply and erection of 15/16 A switch |
| 67 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Supply and erection of 6 pin 15/16 A socket outlet |
| 68 | Supply and erection of Bell push |
| 69 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 70 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 71 | Supply and Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired. (i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 72 | Supply and Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired. (ii) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 73 | Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories includingconnections etc. as required. |
| 74 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (i) Upto 450 mm sweep |
