}

Tender For Construction Of Chulli Beautification At Gobrakhri Samsahan, Maldah-West Bengal

District Magistrate has published Tender For Construction Of Chulli Beautification At Gobrakhri Samsahan. Submission Date for this Tender is 20-03-2024. Civil Work Tenders in Maldah West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

42701939
Tender For Construction Of Chulli Beautification At Gobrakhri Samsahan
Open Tender
Indian
West Bengal
Maldah
20-03-2024

Tender Details

Construction Of Chulli Beautification At Gobrakhri Samsahan

Key Value

Document Fees
Refer document
EMD
INR 10000.0 /-
Tender Value
INR 4.89 Lakhs /-

BOQ Items

Name of Work: Construction of Chulli Beautification at Gobrakhri Samsahan(Booth-97,Mouza-Salalpur,Jl No-105 Plot No-204,G.P.-Pakuahat,Block-Bamangola.)
Sl. No. Item Description
1Earth work in excavation foundation trenches in all sorts of soil. Depth of excavation not exceeding 1.5 m.
2Filling in foundation trenches or plinths by silver sand in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. Including cost of sand (Payment to be made on the basis of measurement of finished quantity of work)
3Earth work in filling foundation (Back Filling) with earth obtained from excavetion of foundation.
4Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powderd earth or local sand.
5Plain Cement concrete with graded stone ballast (40mm size )excluding shuttering in ground floor.
61st class brick work in cement morter 6:1
7foundation and plinth…
8in super structure,ground floor
9Ordinary cement concrete (mix 3:1.5:1) M-20 with graded stone chips (20mm down) excluding shuttering and reinforcement,if any in ground floor as per IS 456-2000.
10Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and bindin with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (Other than TATA)
11Hire and labour charges for shuttering with centering and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slab,beam,column,lintels curved or staight including,fitting,fixing and strikingout after completion of works(up to ground floor)
12125 mm. thick Brick work with and cement morter.(4:1) in ground floor.
1325 mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with grades stone aggregates 10 mm nominal size] and admixture water proofing compound as per mufacture specification followed by two coats of polymar based paint........etc complete.
14Plaster ( to wall,floor,ceilling etc) with sand and cement morter including off or champharing corners as directed and racking out jonts or roughening of concrete surface,including throating,nosing and drip course where necessary (ground floor).
15(i) With 4:1 cement morter,(a) 10 mm thick plaster.(G.F)
16(ii)With 6:1 cement Plaster,(c) 15 mm thick plaster. Out side
17Plaster ( to wall,floor,ceilling etc) with sand and cement morter including off or champharing corners as directed and racking out jonts or roughening of concrete surface,including throating,nosing and drip course where necessary (ground floor)(iii)With 6:1 cement Plaster,(b)20 mm thick plaster at inside
18Artifitial stone in floor,dado,staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with toping made with ordinary or white cement (as necessary) and marmle dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement@ 1.75 kg./sq.m. all complete including all meterials and labour.
19Neat cement puning about 1.5 mm thick in wall,dado,window sills,floor,drain etc.
20M.S. Structural works in columns, beam etc. with simple rolled structural member (I,e joist, angle,chanel section conforming to IS:226)
21M.S. Structural works in columns, beam etc. with simple rolled structural member (I,e joist, angle,chanel section conforming to IS:226)
22Applying decoretive cement based paint of approved quality after preparing the surfaceincluding scraping the same throughly (plaster or concrete surface )as per manufacture"s specification.In ground floor.
23Priming one coat on timber,plastered or on steel or other metal surface with synthetic enamel/oil bound primer of approved quality including smoothening surface by sand papering etc.
24(A) Painting with best quality synthetic enamel paint of approved make and brandincluding smoothening surface by sand papering etc. including oa approved putty etc. on the surface of necessary.
25Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make as per IS: 15965: 2012 and IS: 14246: 2013 (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet
26Add GST @ 18 %
27Add Cess @ 1 %
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail