Public Works Department-PWD has published Annual Repair And Maintenance Of Delhi Govt. Officers Flats At G.K.-1, New Delhi During 2023-24(Sh Providing And Fixing Of Tiles At Flats, Kota Stone Work At Designated Place, Replacing Of Ci Pipe, Structural Steel Work And Other Civil Misc. Works). Submission Date for this Tender is 11-03-2024. Cast Iron Pipe Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. |
| 2 | All kinds of soil |
| 3 | Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth |
| 4 | 1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from naturalsources :10gradedstoneaggregate40mm nominal size derived from natural sources) |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)includingattachedpilasters,columns,piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
| 6 | 1:2:4 (1Cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 8 | Foundations, footings, bases for columns |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 10 | Cement mortar 1:6(1 cement :6 coarse sand) |
| 11 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 12 | Cement mortar 1:4(1 cement :4 coarse sand) |
| 13 | Providingandfixing 18mmthickgangsawcut,mirrorpolished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters,window sills,facias andsimilar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 14 | Granite stone slab of all colour and texture except black, Cherry/Ruby red |
| 15 | Area of slab over 0.50 sqm |
| 16 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 17 | Stone work (machine cut edges in veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement: 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including grinding with hand grinder on joints, rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately). |
| 18 | Prepolished kota stone slabs on exposed face. |
| 19 | 25 mm thick |
| 20 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 22 | Second class teak wood |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202(PartI)non-decorative type,core of blockboardconstruction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 24 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 25 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 26 | Providingandfixingchromiumplatedbrass curtainrodhaving wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete: |
| 27 | 25 mm dia |
| 28 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 29 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 30 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 31 | 150x10 mm |
| 32 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 33 | 1.0 mm thick |
| 34 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. |
| 35 | With 12 mm mild steel U beading |
| 36 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanizedmild steel section madeof requiredshape & size asper CPWDSpecification,uPVC extrudedglazingbeads,interlocksandlnlinesashadaptor(where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.Note:-StructuraldesignproofcheckedfromaGovernment Engineering Institute,tobeprovidedbythemanufacturerfor (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds |
| 37 | Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weightof sash,singlepointlockingzincalloy (zannak) powder coated handles. |
| 38 | Using R3 series with frame (55 mm & above) x (45 mm & above) & sash /mullion (55 mm & above) x (65 mm & above). (Height above 1.2 metre) |
| 39 | Three track three panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body. |
| 40 | Using R4 series with frame (115 mm & above) x (45 mm & above) & sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre). |
| 41 | Providingand fixingbright /matt finishedStainless Steelhandles of approved quality & make with necessary screws etc all complete. |
| 42 | 100mm |
| 43 | Providingand fixingready made304 grade stainless steelModular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirementincludingfinishing (wherever required)andfittings.The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in- charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) |
| 44 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 45 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 46 | Hot finished welded type tubes |
| 47 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 48 | Ingratings,frames,guardbar,ladder,railings,brackets, gates and similar works |
| 49 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 50 | 25 mm thick |
| 51 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming toIS: 15622,of approvedmake,in all colours,shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 52 | Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 53 | Glazed vitrified floor tiles polished finish of size |
| 54 | Size of Tile 600 x 1200 mm |
| 55 | 12 mm cement plaster of mix: |
| 56 | 1:6 (1 cement: 6 coarse sand) |
| 57 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 58 | 1:6(1 cement: 6 coarse sand) |
| 59 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 60 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: |
| 61 | New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 62 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 63 | Two or more coats on new work |
| 64 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 65 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approvedbrandandmanufacture,includingapplyingadditionalcoats wherever required to achieve even shade and colour. |
| 66 | One coat |
| 67 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 68 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 69 | With cement mortar 1:4 (1cement: 4 coarse sand) |
| 70 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 71 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 72 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 73 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 74 | For thickness of tiles 10 mm to 25 mm |
| 75 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 76 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 77 | 100 mm dia pipe |
| 78 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 79 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 80 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 81 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 82 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 83 | 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 84 | Providing and fixing soil, waste and vent pipes : |
| 85 | 100 mm dia |
| 86 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 87 | Providing and fixing plain bend of required degree. |
| 88 | 100 mm dia |
| 89 | Sand cast iron S&S as per IS : 3989 |
| 90 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 91 | 75x75x75 mm |
| 92 | Sand cast iron S&S as per IS - 3989 |
| 93 | Providing and fixing terminal guard : |
| 94 | 75 mm |
| 95 | Sand cast iron S&S as per IS - 3989 |
| 96 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 97 | 100 mm |
| 98 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6 mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. |
| 99 | Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe) |
| 100 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 101 | 15 mm nominal bore |
| 102 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 103 | 15 mm nominal bore |
| 104 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 105 | 100x100 mm size P type |
| 106 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 107 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 108 | Inside size 90x80 cm and 45 cm deep including C.I. coverwithframe(lightduty) 455x610mminternal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 109 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 110 | Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer-in- charge: |
| 111 | Rectangular manhole 90x80 cm and 45 cm deep |
| 112 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : |
| 113 | For fixed portion |
| 114 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 115 | Forshuttersofdoors,windows&ventilatorsincluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 116 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 117 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 118 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 119 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 120 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite)soliddoor/window/Clerestorywindows&otherFrames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A categorywithpropertyofbeingtermite/borerproof,water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.edepth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 121 | Frame size 50 x 100 mm |
| 122 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimumcompressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread offlame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 123 | 30 mm thick |
| 124 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Glazed vitrified floor tiles polished finish of size Size of Tile600 x 1200 mm. |
| 125 | Providing and fixing Nahani trap of good quantity and approval make complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 |
| 126 | Providing and Fixing,sliding door bolt of Stainless Steel grade 304 of approved make/qualitywith nuts and screws etc. all complete as pe direction of engineer-in-charge (a)250x16mm. |
| 127 | Providing and Fixing,Towerbolt of Stainless Steel grade 304 of approved make/qualitywith necessary screws etc. all complete as pe direction of engineer-in-charge (a)250x10mm |
| 128 | Providing and Fixing Tower Bolt, of StainlessSteel grade 304 of approved make/quality with necessary screws etc. all complete as per direction of Engineerr -in-charge. (a) 150x10mm |
| 129 | Providing and fixing Sink Mixer with Pipe Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges of approved brand/quality all complete as per direction of Engineer-in-charge (Pearl make PPR-5318 model or equivalent) |
| 130 | Providing and fixing C.P wall mixer telephonic with L bendof Model FUS-CHR-29273UPR Jaquar make or equivalent approved quality and make including all necessary fittingsall complete as per direction of Engineer-in-charge. |
| 131 | Providing and fixingC.P. Brass Hand Shower (Health Faucet) (ABS Body) with 8mm dia, 1.5 meter long spirochrome flex tube & wall hookof Model ALD-CHR-587 Jaquar make or equivalent approved brand all necessary fittingall complete as per direction of Engineer-in-charge. |
| 132 | Providing and Fixing Modular Kitchen Cabinetmade of (A) 18 mm thick HDHMR Board (High Density High Moisture Resistance Board), which isone side dcorative laminated and other side balancing laminated for shutter fixed with necessary SS screws and self closing hinges. (B) 18 mm thick HDHMR Board (High Density High Moisture Resistant Board) , which is both side balancing laminated for top , bottom, sides, middle and shelf etc. of approved brand/quality ( Action Tesa or equivalent) , fixed with necessary SS screws and minifix to the wall/ Board etc all complete to make a Frame to fix the SS Basket as well as Cutlery. (C) Back side of the Cabinet is made with 5.50mm thick HDHMR OSL board (High Density High Moisture Plain Board) of approved brand/quality ( Action Tesa or equivalent). fixed with necessary SS screws and minifix to the wall. Stainless Steel fancy Handle of 100mm is to fixed on the Shutter. All the Edges of Shutter are covered with 2mm thick PVC Edge Bending, fixed with PVC bending glue. Front edges of Top, Bottom, Sides , Middle and Shelfs are covered with 0.80mm PVC Edge Bending fixed with PVC bending glue. All the shutters are fixed to the frame with stainless steel soft closing spring hinges (Hydraulic type) of Approved Brand/make with full threaded steel screws including making necessary recess in board and finished all complete as per direction of Engineer-in-charge. (Front surface area of Cabinet only to be measured for payment.) (Handles , Basket , Drawer Channel to be paid in original item) |
| 133 | Providing and Fixing Modular Kitchen Counter Overhead box made of (A) 18 mm thick HDHMR Board (High Density High Moisture Resistance Board), which isone side dcorative laminated and other side balancing laminated for shutter fixed with necessary screws and softclose hinges. (B) 18 mm thick HDHMR Board (High Density High Moisture Resistant Board) , which is both side balancing laminated for top , bottom, sides, middle and shelf etc. of approved brand/quality ( Action Tesa or equivalent) , fixed with necessary SS screws and minifix to the wall/ Board etc all complete to make a Frame Cutlery/shelf. (C) Back side of the Cabinet is made with 5.50mm thick HDHMR OSL board (High Density High Moisture Plain Board) of approved brand/quality ( Action Tesa or equivalent). fixed with necessary SS screws and minifix to the wall. Stainless Steel fancy Handle of 100mm is to fixed on the Shutter. All the Edges of Shutter are covered with 2mm thick PVC Edge Bending, fixed with PVC bending glue. Front edges of Top, Bottom, Sides , Middle and Shelfs are covered with 0.80mm PVC Edge Bending fixed with PVC bending glue. All the shutters are fixed to the frame with stainless steel soft closing spring hinges (Hydraulic type) of Approved Brand/make with full threaded steel screws including making necessary recess in board and finished all complete as per direction of Engineer-in-charge. (Front surface area of Shutter only to be measured for payment.) (Handles to be paid in original item) |
| 134 | Providing and Fixing Room Cup Board, of depth upto 600mm,and height upto 1.5meter made of (A) 18 mm thick HDHMR Board (High Density High Moisture Resistance Board), which isone side decorative laminated and other side balancing laminated for shutter. (B) 18 mm thick HDHMR Board (High Density High Moisture Resistant Board) , which is both side balancing laminated for top , bottom, sides, middle and shelf etc. of approved brand/quality ( Action Tesa or equivalent) , fixed with necessary SS screws and minifix to the wall/ Board etc all complete to make a frame for drawer, shelf etc . (C) Back side of the Cabinet is made with 5.50mm thick HDHMR OSL board (High Density High Moisture Plain Board) of approved brand/quality ( Action Tesa or equivalent). fixed with necessary SS screws and minifix to the wall. Stainless Steel fancy Handle of 100mm is to fixed on the Shutter. All the Edges of Shutter are covered with 2mm thick PVC Edge Bending, fixed with PVC bending glue. Front edges of Top, Bottom, Sides , Middle and Shelfs are covered with 0.80mm PVC Edge Bending fixed with PVC bending glue. All the shutters are fixed to the frame with stainless steel soft closing spring hinges (Hydraulic type) of Approved Brand/make with full threaded steel screws including making necessary recess in board and finished all complete as per direction of Engineer-in-charge. (Front surface area of shutter only to be measured for payment.) (Handles , Drawer Channel to be paid in original item) |
| 135 | Providing and Fixing Room overhead Cup Board, of depth upto 600mm,and height upto 1.5meter made of (A) 18 mm thick HDHMR Board (High Density High Moisture Resistance Board), which isone side dcorative laminated and other side balancing laminated for shutter fixed with necessary screws and softclose hinges. (B) 18 mm thick HDHMR Board (High Density High Moisture Resistant Board) , which is both side balancing laminated for top , bottom, sides, middle and shelf etc. of approved brand/quality ( Action Tesa or equivalent) , fixed with necessary SS screws and minifix to the wall/ Board etc all complete . All the Edges of Shutter are covered with 2mm thick PVC Edge Bending, fixed with PVC bending glue. Front edges of Top, Bottom, Sides , Middle and Shelfs are covered with 0.80mm PVC Edge Bending fixed with PVC bending glue. All the shutters are fixed to the frame with stainless steel soft closing spring hinges (Hydraulic type) of Approved Brand/make with full threaded steel screws including making necessary recess in board and finished all complete as per direction of Engineer-in-charge. (Front surface area of shutter only to be measured for payment.) (Handles to be paid in original item) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
