Annual Repair And Maintenance Of Lower Water Supply Scheme Shimla From Gumma( Sh: -Complete Rewinding /Repairing Of Three Phase Bhel Make Motor 925Hp/ 690Kw, 1485Rpm Heaving Sr. No. 45278A402-11-03 Slip Ring Type New Model Motor, At Bed No 4Drabla Pumpi, Shimla-Himachal Pradesh
TDR : 42681211
Tender Notice
BOQ
Expired
Shimla
Himachal Pradesh
Annual Repair And Maintenance Of Lower Water Supply Scheme Shimla From Gumma( Sh: -Complete Rewinding /Repairing Of Three Phase Bhel Make Motor 925Hp/ 690Kw, 1485Rpm Heaving Sr. No. 45278A402-11-03 Slip Ring Type New Model Motor, At Bed No 4Drabla Pumpi
Name of Work:-A/R & M/O ofLWSS Shimla from Gumma( SH: -Complete Rewinding /Repairingof three phaseBHEL make Motor 925HP/ 690KW, 1485RPM heaving Sr. No. 45278A402-11-03 slip ring type New model motor, at bed No 4Drabla Pumping Station)
Sl. No.
Item Description
1
Complete rewinding of Stator 690 KW 37-A ,1485 RPM 50 HZ 3 Phase induction motor including cost of winding insulation material removal of old winding with new winding material and alliedob complete material including carriage of material in all leads and lifts with all respect as per direction of Engineer- in-Charge.
2
Complete rewinding of Rotor of slip ring motor of BHEL make 2.2 KV motor 690KW/925HP including cost of winding ,insulation material,removing of old winding and rewinding with new winding material and allied jobs/material all leads and liftsetc., complete in all respect and as per the direction of Engineer-in-Charge.
3
Providing and fixing copper cable 185mm2 in rotor and stator complete connection with all leads and lifts as per the direction of Engineer In Charge.
4
Transportation charge of motor from site to workshop and back inculding carriage of material in all leads and lifts as per the direction of Engineer In Charge.
5
P/F bearing at drive end No.NU-226 ECG-C3 SKF make complete in all respect as per direction of Engineer-In-Charge.
6
P/F Bearing at Non drive end No.6226-C3 SKF make complete in all respect as per direction of Engineer-In -Charge.
7
Dynamic balancing of Rotor after rewinding complete in all respect as per direction of Engineer-In -charge.
8
Reclamation of DE and NE side bearing,hosing including all leads and lifts complete in all respectas per the direction of Engineer In Charge.
9
Installation of motor on bed and precision and longitudinal as well as axial allignmentof motor with pump shaft with suitable precion measuring divices like dial gaguge stainless steel shims including manual and mechanical loading and unloading including all leads and lifts complete in all respect as pe rdirection of Engineer In Charge.
10
Testing of motor on no load and full load condition including cable connection and commissioning of motor at site including all leads and lifts complete in all respect.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
