Military Engineer Services-MES has published Tender For Additional/Alternator To Certain Smq At Af Stn Faridabad In Aor Of Ge (Af) Faridabad. Submission Date for this Tender is 02-04-2024. Mobile Generator Tenders in faridabad Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Mar-2024 | Term and condition | Terms and Conditions | 26-03-2024 |
| 2 | 16-Mar-2024 | Revise BOQ | BOQ | 26-03-2024 |
| 3 | 16-Mar-2024 | Date | Date | 26-03-2024 |
| 4 | 26-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-04-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.00 Kg of cement per sq m complete all as specified and directed by Engineer-in-Charge. |
| 3 | Demolition of cement concrete(un-reinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or aboveground level) complete all as specified and directed by Engineer-in-Charge. |
| 4 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F Vitrified ceramic tiles 10 mmthick of light shade(Square/rectangular) polished area of each tilenot exceeding 0. 36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 6 | All as per item No 05 above but light shade as in skirting on vartical surface over 10 mm thickbacking coat in CM 1:4 |
| 7 | M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishesin CM (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for Glazed ceramic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment ot match with shade of granite including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for 75mm thick cement concrete type C-2 1:3:6using 40mm graded aggregate as in plinth protection, varamdah or path including necessary formwork & dummy joints complete all as specified and as directed by the Engineer-in-Charge |
| 11 | Taking down chowkat or frames not exe 1.50 sq.m each (with shutter without taking off shutter from the frame)etc complete all as specified and directed by Engineer-in-Charge. |
| 12 | Taking down chowket or frame with shutter (without taking of shutter from frame) exc 1.5 sqm but not exe 4.00 Sq m each each complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for Haking out old broken glass (any thickness size quality or description) from wooden frames or stone,concrete or brick surrounds glazed with putty or fixed with beeds complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F PVC door frame 50x47x5mm thick reinforced MS square tube including 25x6mm MS holdfast etc complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F 30mm thick (styles) factory made solid panelPVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together withsolvent cement and fixing in the frame at site all as shownon drawing on page 146 of SSR Part-II 2004 including taking down the old PVC door shutters complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for Mild steel framed work such as angles, grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, laddersand similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F 30mm thick flush door shutter solidcore construction with block board case and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge. |
| 18 | S & F 5 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F 35mm thick glazed and skelton shutter of 1st class hardwood open rebated and prepared to receive glass, gauze divided into squarewith plain ,chamfered or rounded, mitred and rebated sash bars, any number, edges of framing plain or rounded , fitted with cut and mitred beads for securing glasses etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.20(a) supplied and fixed to chowkhat complete all as specified and directed by Engineer in Charge |
| 20 | S&F pressed steel frame for doors with one or more rebated including necessaryfixing lungs, hinges, lock, strikeplates etc complete all as specified and size of frame 125 x60 mm complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F pressed steel frame for doors with one or more rebated including necessaryfixing lungs, hinges, lock, strikeplates etc complete all as specified and size of frame 165 x60 mm complete all as specified and directed by Engineer-in-Charge. NOTE : this frameis for fixing of double doors |
| 22 | S&F in repairspowder coated Anodised aluminium frame for doors, windows( min thickness 50 microns) with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F Of Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for factory made box type steel windows, 16 gauge steel section for frames & shutters, as per TD drawing No.219, sheet 01/03 to 03/03, type using ERW hollow "P" section comprising double frame for glazed and gauged skelton shutters jointed internally with flat iron 40X4 mm complete including grill of 12 mm square bar, fixed horizontally @ 10 cm centre to centre, pintel hinges 75 mm long 12 mm dia, 100 mm long handle, 150 mm long tower bolts, lugs etc. with/ without cooler provision, complete all as specified and directed by Engineer-in-Charge. Note (i) :- (i) For purpose of measurement andpayment double shutter with frame including grill shall be considered as one unit. (ii) Glazing and wire mesh shallbe measured and paid for separately in respective of item. Note (ii) : Item includes cost of double shutter of gauged and glazed shutter with square bar grill. |
| 25 | S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F 150 mm long, extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F 100 mm cold rolled mild steel butt hinges heavy weight complete all as specified and directed by Engineer-in-Charge. |
| 29 | S & F floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150mm complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel /Aluminium windows, or Stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F sheet glass ordinary quality 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L for 18/19 mm tk Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, Ditto fixed in repair for copboard shutter, shelve, partiion & kitchen cabinet complete all as specified and directed by Engineer-in-Charge. |
| 34 | Demolition brick work or stone/boulder masonary,built in cement mortar or cement lime mortar including all quions, arches pillars,etc but ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for brickwork using old size bricks Sub class B straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 36 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces with WPC @ of 3% of weight of cement complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | M & L for rendering 15mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfacesfinished even and smooth without using extra cement or cement complete all as specified and as directed by the Engineer-in-Charge |
| 39 | M&L for Rendering 5 mm thick on fair faces of brick or concrete surfaces with in CM 1:3 on ceilling finished even and smooth all as specified & as directed by Engineer-in-Charge |
| 40 | Supply only Integral waterproofing compound complete all as specified and directed by Engineer-in-Charge. |
| 41 | M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 42 | M & L for preparing new surfaces of walls, distempering 2 coats with oil emulsion distemper white or tintedover one coat of wall care putty complete all as specified and directed by Engineer-in-Charge. |
| 43 | All as per item No 42 above but on ceiling surfaces |
| 44 | M&L for Complete removal of existing treatment including preparation of surfaces and applying two coats of weather proof emulsion of electric blue or white colour over a coat of exterior wall primer in (projections of column/wall/edges of chajja, roofs and other narrow locations in buildings upto ground plus three floor) complete all as specified and directed by Engineer-in-Charge. |
| 45 | M&L for complete removal of existing treatment on walls including preparing old plaster surfaces and applying two coats of cement based paint over a coat of putty complete all as specified and directed by Engineer-in-Charge. |
| 46 | M&L for complete removal of existing treatment on walls including preparing old plastered surfaces and applying two coats of oil bound distemper over a coat of putty complete all as specified and directed by Engineer-in-Charge. |
| 47 | All as per item No 46above but on ceiling surfaces |
| 48 | M&L for two coat of Synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description not other wise described over 10 cm width or girth including preparation complete all as specified and directed by Engineer-in-Charge. |
| 49 | M&L for Preparation of old painted surfaces andapplyingone coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L for prepartion of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10 cm width or girth & applying one coat of synthetic enamal paint complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for prepartion on new surface of steel & iron work of any description not specifically mentioned otherwise over 10 cm width or girth & applying two coat of synthetic enamal paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L PCC type B1, 1:2:4, using 20mm graded aggregate as in stagging for water tanks, inserting hold fast and filling Jamb etcand like including weathering slighly rounded or chamfered and where connecting slab and parapets etc angles throating complete all as specified and directed by Engineer-in-Charge. |
| 53 | Dismantling water tanks 250 to 500 ltrs capacity complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F Rotational molded polyethylene water storage tanks 3 layered, ISI marked (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litreswith GI Tank Nipple inlet and outlet 20mm complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F Ball valve, high pressure withof PTMTwith epoxycoated aluminium rod and high density plastic ball screwed for iron pipe orfixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms) complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F in repairGun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 57 | M&L for Formwork to rough fininised surfaces of chullah hoods, chajjas, troughs and similar items in- cluding edges complete all as specified and directed by Engineer-in-Charge. |
| 58 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 59 | Taking down carefully existing bitumen tar felt including plaster, concrete/brick coba /tiling from the roof /parapets till RCC slab and roughening the surface ,wire brushing , cleaning and washing with water etc., and removing the rubbish to a distance exceeding 500m but n.exc 1Km & depositing where directed . |
| 60 | Material and labour for roof treatment on RCC roof slab completeas mentioned below, complete all as specified and directed by Engineer-in-Charge:- (i) Cleaning the concrete surfaces of RCC roof slab as obtainedafter demolition/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampnessall as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide item No. 9 hereinafter of pressuregrouting shall be operated at the required locations). (iii)Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (vi) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface. (v) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch", application method all as per manufacturer"s instructions. |
| 61 | S&F in repair Harrison curtain rails, 19/20mm dia,anodised aluminium alloy with fixing brackets, stops, rollers etc including taking down old one complete all as specified and directed by Engineer-in-Charge. |
| 62 | Taking up or down steel tubing with connections for cleaning for refixing complete of bore 15mm,complete all as specified and directed by Engineer-in-Charge. |
| 63 | Taking up or down steel tubing with connections for cleaning for refixingcomplete of bore 20mm, complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittingscomplete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittingscomplete all as specified and directed by Engineer-in-Charge. |
| 66 | Cutting chases for concealed water tubing or concealed conduitwiring, etc. and making good, cutting exceeding 10cm girth in CM 1:3 complete all as specified and directed by Engineer-in-Charge. |
| 67 | S&F in repair Bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed in repair, complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F in repair Brass chromium plated shower rose 125mm with CP Arm with swivel joints incl fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F in repair Stopvalves fancy type, chromium plated with long shank and cup (concealed type) for iron pipe or for unions of bore dia 15mm and fixed,complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F in repair Vitreous china squatting pan of Orissa Pattern size 580x 440 mm whitewith ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1using brick bats and finishing the top surfaces to match with the existing flooring complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repair vitreous china wash basin, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of bracket or erecting stand fixing of waste pipe etc complete all as specified and directed by Engineer-in-Charge. |
| 72 | S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers; including bedding in cementmortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in Repair PVC waste pipe suitable for 32mm dia waste coupling complete all as specified and directed by Engineer-in-Charge. |
| 74 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed by Engineer-in-Charge. |
| 75 | S&F in repair Angle cock, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions bore dia of 15mm complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&F 15mm dia pillar taps, cast cast copper alloy with capstan heads, chromium plated, fency type screwed down high pressure, with or with out lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 77 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 78 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with mild steel chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge. |
| 80 | S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed by Engineer-in-Charge. |
| 81 | S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed by Engineer-in-Charge. |
| 83 | Taking down rainwater pipes/PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&FPVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls withPVC brackets/clamps complete all as specified and directed by Engineer-in-Charge. |
| 85 | S&FPVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls withPVC brackets/clips complete all as specified and directed by Engineer-in-Charge. |
| 86 | S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F PVC(SWR) bends suitable for 75 mm external diacomplete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F PVC(SWR) bends suitable for 75 mm external dia with acces door complete all as specified and directed by Engineer-in-Charge. |
| 90 | S&F PVC (SWR) vent cowl of 75mm bore dia complete all as specified and directed by Engineer-in-Charge. |
| 91 | M&L in repair75mm bore dia PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. |
| 92 | M&L in repair110mmbore dia PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. |
| 93 | S&F in repairs of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 94 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose and soft soil complete all as specified and directed by Engineer-in-Charge. |
| 95 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge. |
| 96 | M&L for Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed |
| 97 | M&L 15mm thick screed bed or bedding layer of cement mortar 1:4, for laying floor finish, complete all as specified and directed by Engineer-in-Charge. |
| 98 | M&L fibrillated fiber reinforced heavy duty coloured cement concrete pre polished chequred tiles from Ultra floor tiles or equivalent size 300 x 300 x 20 to 25 mm and wt4.2kg/tile set jointed and pointed in neat cement slurry in floors, and cut and polished with white cement & pigment complete all as specified and directed by Engineer-in-Charge. |
| 99 | M&L for Removing building material etc, (other than spoil payable under items 03028 to 03031 in Section 3-Eathwork) to a distance of 2.5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination (for per load refer SSR 2010 section 21 page 462) complete all as specified and directed by Engineer-in-Charge. |
| 100 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. |
| 101 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed complete all as specified and directed by Engineer-in-Charge. |
| 102 | M & L for and termite treatment of soil under existing floors using emulsion @ one litre per hole , 300 mm apart including drilling and plugging , 12mm dia holes with cement mortar 1:2 (1 cemnt: 2 coarse sand) to match the existing floors complete all as specified and directed by Engineer-in-Charge. |
| 103 | M & L for ATT along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engineer-in-Charge. |
| 104 | Supply and lay pipe galvanised GI Tubing medium grade 25 mm in wall/floor/Pillar and connection in old or new position including fitting like socket/union/Tee/Reducer Nipple etc complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F Stop valve 25 mm cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed handle, screwedd both ends for iron pipe or for unions, complete all as specified and directed by Engineer-in-Charge. |
| 106 | Taking Down carefully Copper/aluminium Point Wiring (light, fan,socket or Power) complete,(fittings Such as switches, ceiling roses, pendents, regulators sockets etc, to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer-in-Charge. |
| 107 | M&L for point wiring in repairs complete with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade FRLS cable IS-694 marked drawn throughand includingrigid non metallic PVC heavy duty concealed conduit(min 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.12.5 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm including conduit accessories likebends.tees, juction boxes etc fixed concealed in wall/ceiling or surface conduit on ceiling with provision of 2 mm thick pressed steel terminalboxes covered with 3 mm thick plastic laminatedwhite /coloured top cover for mounting switch,socket,fan regulator,industrial socket and all lamp fittings etc including 1.5 sq mm PVC insulated but unsheathed copper conductor FRLS cable,1100 volt grade IS-694 marked as earth contuinity wire for one light/Fan point controlled by one,one way switch complete all as specified and directed by Engineer-in-Charge. |
| 108 | Allas per itemNo.107 above but on the same boardwith other switches with 1.5 sq mmPVC insulated copper conductor for continuous earthing. |
| 109 | Allas per itemNo. 107 above but one three pin 5 Amps socket out let on independant board with1.5 sq mmPVC insulated copper conductor for continuous earthing. |
| 110 | Allas per item No. 107 above but 15 Amps3 pinsocket outleton independent board with 2.5 sq mmPVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single corefor continuous earthing. |
| 111 | Allas per item No. 107 above but for Single pole and neutral enclosure with 4.0 sq mmPVC insulated and sheathed copper conductor with 4.00 sq mm PVC insulated copper conductor single corefor continuous earthing. |
| 112 | All as per item No. 107 above but one light pointcontrolled by two2 way 5 Amps switch. |
| 113 | S&F Piano switch in repairs, flush button single pole one way 6 Amp complete all as specified and directed by Engineer-in-Charge. |
| 114 | Supply and fix switch flush type 5 Amps single pole two way complete all as specified and directed by Engineer-in-Charge. |
| 115 | S&F bell push, in repairs, flush type 5 Amps complete all as specified and directed by Engineer-in-Charge. |
| 116 | S&F socket outlet, in repairs, flush type 2 in 1, 3 pin 6 Ampcomplete all as specified and directed by Engineer-in-Charge. |
| 117 | S&F socket outlet, in repairs, flush type 2 in 1, 3 pin and 6/16 Ampcomplete all as specified and directed by Engineer-in-Charge. |
| 118 | S&F Piano switch in repairs, flush button single pole one way 16 Amp complete all as specified and directed by Engineer-in-Charge. |
| 119 | S&Fstepped type electronic fan regulator, in repairs, flush type on the existing phenolic laminated sheet etc complete all as specified and directed by Engineer-in-Charge. |
| 120 | S & F Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as specified and directed by Engineer-in-Charge. |
| 121 | Supply and fix sheet metal enclosures forMCB distribution board 230 VoltsSinglepole and neutral 12 way Double door with 200 Amps rated busbar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface complete all as specified and directed by Engineer-in-Charge. |
| 122 | S&Fin repairs,MCB SP 6-32 Amps,"B" series 240 Volts complete all as specified and directed by Engineer-in-Charge. |
| 123 | S & Fin repairs,MCB SPN 32 Amps,"B" series 240 Volts complete all as specified and directed by Engineer-in-Charge. |
| 124 | S&Fin repairs,ceiling rose surface backlight, 65 x 50 mm three terminals complete all as specified and directed by Engineer-in-Charge. |
| 125 | S & F in repairs Bell Multi Music type, 240 Volts complete all as specified and directed by Engineer-in-Charge. |
| 126 | Supply and fixing LED , Tube light fitting 20 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge. |
| 127 | Supply and fixing LED , Tube light fitting 12 W, 6500K Intenso AX LED batten aluminium profile self ballasted surface mounted LED Batten extruded aluminium body with PC diffuser in unic shape. >180º wide light distribution. soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge. |
| 128 | S&F in repair energy efficient LED building secruity lights 1x30W with lens, PDC aluminium body and toughened glass visor fitted in frame secondary optical lens for superior light distribution efficay >100 Lm/W, CCT 5700K, IP-65 complete with bracket/clamps, nut bolts and washers suitable for fitted in building complete all as specified and directed by Engineer-in-Charge. |
| 129 | S&F Fresh Air fan 250 mm sweep, 240 Volt AC single phase complete all as specified and directed by Engineer-in-Charge. |
| 130 | S&F exhaust fan heavy duty metal body with louvers of size 300mm sweep, 1400 RPM and fixing arrangements complete all as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
