Military Engineer Services-MES has published Tender For Repairs To Joinery, Aluminium Doors/Ventilators, Steel Windows/Ventilators, Cup Boards, Rolling Shutters, Steel Doors, Pvc Doors, Wooden Doors And Windows Etc And Other Connected Works In Zone I To Vi At Cme. Submission Date for this Tender is 25-03-2024. Door Tenders in Pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-03-2024 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames, not exc. 1.50 sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 2 | Taking down chowkats or frames, exc. 1.50 Sqm but not exc. 4.00 sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 3 | Taking down shutters only of size exc 1.00 sqm but not exceeding 2.00 Sqm |
| 4 | S&F 2nd class hard woodplain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put together with glue pinned at joints including taking downchowkats with shutters complete all as specified and directed |
| 5 | M&L preparing surfaces of wood and wood based and treating ends of posts, back of chowkats. etc area exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified and directed |
| 6 | S& fixed factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed |
| 7 | S&F 30mm thickflush shutter, solid core construction, with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 8 | S& fixed 2nd class hard wood 35 mm thick made glazed and skeleton shuttersopen rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed |
| 9 | Mild steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed. |
| 10 | Preparing surface of iron and treating small articles such as stop, covers, gully grating, holdfasts, end of posts area exc 0.1 Sqm each complete all as specified and directed. |
| 11 | Cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed |
| 12 | S&F PVC solid door frame of size 50X47mm made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube as specified manufacturer’s instructionscomplete all as specified and as directed. |
| 13 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall becovered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rails & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and directed |
| 14 | M&L for preparing new wood and wood based surfaces of any description, over 100mm width or girth and applying two coats of synthetic enamel paint (first quality) over a coat of pink primer, complete all as specified and directed |
| 15 | M&L for preparing oldwood and wood based surfaces of any description, over 100mm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed |
| 16 | M&L preparing old steel and iron surfaces of any descriptions, over 100mm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 17 | S & F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 . |
| 18 | S & F mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, complete all as specified and directed. |
| 19 | M&L barrel tower bolts stove enamelled black of size 200 mm complete all as specified and directed. |
| 20 | S & F 150 mm Aluminium handles, cast type anodised |
| 21 | S/F 150mm long Aluminium handles, cast type anodised |
| 22 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete. |
| 23 | S&F 300mm long Aluninium alloy, anodised, sliding door bolt with hasp , staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 24 | S&F300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed |
| 25 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 26 | S&F stainlesssteel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks of mild steel wire stapes, fixing and repair etc, complete all as specified and directed. |
| 27 | S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 28 | S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plateetc complete all as specified and directed. |
| 29 | S&F in repair 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed. |
| 30 | S&F repair in sheet glass tinted 4.0mm thick, selected quality, fixing to aluminium sections as in panel of doors, windows Shutters and panelling works with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws, etc., as required/ordered at Site(s), complete and fixed repairs all as specified and directed. |
| 31 | S&F in repairs 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-Charge. Make: Modhi Gold |
| 32 | S&F in repairs 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-Charge.Make: Modhi Gold |
| 33 | S&F aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- |
| 34 | (a) Aluminium colour anidised door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per spd. (c) Aluminium colour anodised Top & style shutter section 95.25x44.45x2.00 mm as per spd. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002. Make-Jindal(f) Floor spring Make-Sandhu, (g) Six lever mortice lock brassMake : Godrej/Classic on in each door (h) 12 mm thick particlular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass(Colour)4 mm thick Make : Saint gobain midgaurd (k) Floor spring , Make Sandu Note : If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge. |
| 35 | S & F powder coated Aluminium sliding windows three track with two glass shutters using 5 mm thick glass tinted Modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, Alumini cleat, PVC track, bearing, handle lock rubber beading, etc complete including taking down old window of any size. NoteSize of aluminum sections are as under :- (i) Three track top & vertical – Jindal main – 2010 Section No 20621. (ii) Three track bottom - Jindal main – 2010 Section No 20620. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606. (iv) Shutter top & bottom - Jindal main – 2010 Section No 20604 (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605. |
| 36 | Aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr)frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick)(wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc including taking down old ventilator etc. complete all as specified and directed. |
| 37 | S&Fin repair 12 mm thick Veneered decorateive plywood, grade 1 (with BWR resin) with decorate face veneers on both faces; fixed with screws to timber frame work Make : Duro/National |
| 38 | M&L 12 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs |
| 39 | M&L 6 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs |
| 40 | Sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and directed |
| 41 | Resecuring or easing & adjusting, without taking down of shutter in the same opening of any description and size complete all as specified and directed. |
| 42 | M&L 18/19mm thickPre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed. |
| 43 | M&L for plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, exc 13 & n. exc 25 sq. cm second class H/W complete all as specified and directed. |
| 44 | M&L cover fillet (lipping) of tempered hard board 40mm wide, 6mm thick and fixing with screw complete all as specified and directed. |
| 45 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 30mm complete all as specified and directed. |
| 46 | S&F in repairs 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed. |
| 47 | S&F in repais 150mm hasp and staple, aluminium anodised ,wire type stove enamelled black, including bolt to hinge plate and fixed with screw.complete all as specified and directed. |
| 48 | Dismantlingwall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets |
| 49 | M & L for false ceiling with 4mm thick designer"E" board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size24mm x38mm x 0.7mm cross tee of size24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and withwith 3mm dia GI wireand making holes etc all as directedincluding two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and MakeE boardGypsum or equivalent approved . |
| 50 | Dismantling boarding, any description in any position with nails complete all as specified and directed. |
| 51 | M&L 2nd class hardwood clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed. |
| 52 | M&L Welding in repairs n. exc 2.5cm in length to old doors for fixing hinges, tower bolt, sliding door bolt, handles, locking system, etc complete all as specified and directed. |
| 53 | S&F fixed in repairs aluminium sheet 0.56 mm th fixed to door shutters with nails all as directed |
| 54 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed. |
| 55 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed. |
| 56 | Dismantling of plain or corrugated steel heeting any gauge, thickness, including nainital or similar pattern roof covering |
| 57 | S&F 19/20 mm dia medium weight, aluminium powder coated of choice colouras in drapery rod curtain rod |
| 58 | M & L for filling up the gaps at junction, i.e top, bottom and sides with requried EPDM rubber/ neoprene gasket work for alunimium doors, windows, ventilators and partitions (fixed portions) all as specified and directed by Engr-in-charge. Note : 1) The quoted rate is including the necessary scaffolding work upto (G+2) , 2) any damages to the existing glasses and materail should be replaced by contractor, without any extra charges. |
| 59 | S & F aluminium powdercoated brackets, decorative type of colour and design as approved suitable for curtain rods of 19/20mm dia |
| 60 | (Applicable for above allitems) |
| 61 | Contractor has to employ skilled/unskilled tradesman with adequate experience & required documents to be submitted to office. |
| 62 | Labour should wear contractors uniform with firm logo, failing which recovery shouldbe made. |
| 63 | Minimum of 02 x teams of each trades shall be available for maint of urgent nature whenever called upon of any trade, failing which recovery will be initiated for not employing adequate labour at site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
