Tender For Construction Of Store Room, And Vitrified Flooring Work In Resi No. H-10 At University Campus.
Tender Value
2.76 Lakhs
Estimated cost
Bid Submission
27 Mar 2024
0 days left
EMD
27653
Bank guarantee accepted
Document Fee
581
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Store Room, And Vitrified Flooring Work In Resi No. H-10 At University Campus.
BOQ
| Sl. No. | Item Description |
| 1 | M-150 Brick work in 1:4 (one cement & three fine sand of 1.25 F.M) mortar in superstructure including necessary cutting &moulding of bricks as required for wall of one brick thick, add for extra labour to the rate including supply of all labour, tools & plants etc. required for proper completion of the work. |
| 2 | Cement Concrete with 4 Cm. Gauge approved stone ballast, coarse sand of 1.25 F.M. & cement in proportion of 8:4:1 in foundation & floors including all labour, material and T&P. etc. required for proper completion of work. |
| 3 | Dismantling of floor to be stone flagged or tiled floor & stacking out of malwa including supply of all materials, labour, tools & plants etc. required for proper completion of the work. |
| 4 | Dismantling doors or windows including chaukhat with fold fast and including stacking of materials as directed by the engineer-in-charge within a distance of 60 metre(200 ft) |
| 5 | Cement concrete with 2 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including all labour, material and T&P. etc. required for proper completion of work. |
| 6 | M.S iron work in Heavy sizes such as trusses, built up gates, record racks, roof work, gates etc. including riveting or welding where necessary required from including supply of steel bolts. Nuts wastage etc. and their fixing required for proper completion of the work. |
| 7 | 12 mm. (1/2”)thick plaster with cement & fine sand of 1.25 finenss modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work |
| 8 | S/F. 10 mm. thick vitrified tile size 24”x24” premier quality flooring or in skirting or dado laid with pidilite chemical finished with white cement & colour jointing and polishing including supply of all materials, labour, tools & plants etc. required for proper completion of the work. |
| 9 | Supply and fixing 6 mm.(1/4”) china white glazed tiles in skirting or dado laid with 1:3 cementandapproved coarse and mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (Size of tiles 450x300mm or above) |
| 10 | Approximate cost of ISI marked oxidized Aluminium fitting with screw for door & windows etc.& Stoper, Chutkni, etc including supply of all materials, labour, tools & plants etc. required for proper completion of the work. |
| 11 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:14.5.2 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) |
| 12 | S/F. Galvanized Mosquito proofheavy quality S.S. Wire gauge heavy quality over windows and including supplu of teak wood batten 8 cm x 1 cm (3\"x3/8\") flat iron 25mm x 4mm and including supply of necessary screws all materials, labour, tools & plants etc. required for proper completion of the work |
| 13 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 14 | P/F. ¾” thick , ISI mark, Anti-termite water proofboard havingboth side 0.8mm thick mica pasted, having all side of board 3/4\" wide-5mm thick teak wood margin with polished including supply of all materials, labour, tools & plants etc. required for proper completion of the work. |
| 15 | Scraping old white of colour wash including disposal of refuse as directd by the Engineer-in-charge within a distance of 60 metre (200feet) |
| 16 | One coat cement primer old/new surface including all material, labour tools & plants etc. required for proper completion of the work. |
| 17 | Providing wall putty on old surface with approval quality material of berger/J.K. Birla or similar make 2 coats including supply of all materials, labour, tools & plants etc. required for proper completion of the work. |
| 18 | Two coatenamel painting or varnishing sand papering and smooth surface by putty including supply of all materials, labour, tools & plants etc. required for proper completion of the work. |
| 19 | Finishing wall with two coats of oil bond distemper including sand apering papering, priming & smooth finish by putty including supply of all materials, labour, tools & plants etc. required for proper completion of the work. |
| 20 | Dismantling old plaster or skriting raking out joints & cleaning the surface of plaster including disposal of rubbish to the dumping ground with in 50 mtr. lead. |
| 21 | P/F. 35 mm. thick commercial flush door shutter with including supply & fixing ofwooden cleats & stops & including fixing & adjustment of hinges, bolts, locks, handles, spring & all other fitting (but excluding their supply) of all labour, material T&P. etc. required for proper completion of work. |
| 22 | Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).12.64.1 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. |
| 23 | GST |
AI Tender Summary
Tender Timeline
Mar 01, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 27, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender