|
| 1 | PART-I |
| 2 | Excavation over areas, n.exc 1.5 m in depth and getting out in soft/loose soil complete as specified and directed. |
| 3 | Removing excavated soil to a distance outside MD land and depositing where directed at a level n exc 1.5 m above the starting point complete as specified and directed.. |
| 4 | M&L for preparing the soil base for planting grass by levelling the base to required slopes and levels, supplying and spreading 02 parts of sand, 01 Part of bio fertiliser and one part of red loamy virgin soil for growth of grass to an average thickness of 200mm including mixing vermin compost etc., to improve the fertility of the soil in the required proportion and finally preparing the soil base suitable for planting carpet grass etc. including remoal surplus debris outside MoD land, complete all as specified and as directed. |
| 5 | M & L for planting ever green grass of natural Korean/mexican feather carpet grass of approved pattern over the prepared base lawn/carpet area with good earth including watering, removing the weeds or any other vegetation, mixing the manure from time to time and pesticides as required for healthy growth as per standard gardening practice complete all as specified and directed. |
| 6 | M & L for planting of approved species of crotons (height of plant not less than 75 cm above ground level) of approved spacies at a spacing not exceeding 200cm C/C including excavation of pit of min dimension 50cmx50cmx50cm and removal of excavated earth to outside the MD land, preparation of ground upto 30cm deep and filling with good earth, cow dung, vermi composit and watering etc complete all as specified and directed. |
| 7 | All as per item no 06 but approved species of Hedge plants |
| 8 | All as per item no 06 but approved species of SaplingAcalypha Variegated |
| 9 | All as per item no 06 but approved species of Duranto |
| 10 | Supply and planting Flower plant (Plant height 2-3 ft) with pots of approved species of Lantama varities including necessary earth work and providing cow dung manure etc obtained from nurseries complete all as specified and directed. |
| 11 | All as per item no 10 but approved species of Plumeria Pudica |
| 12 | All as per item no 10 but approved species of Alamanda mini |
| 13 | All as per item no 10 but approved species of Ixoras |
| 14 | All as per item no 10 but approved species ofbutton rose |
| 15 | Supply and planting Ornamental Shrubs like baby crotons(Plant height 2-3 ft) including necessary earth work andproviding cow dung manure etc complete all as specified and directed. |
| 16 | All as per item no 15 but approved species of erranthemum vatiesatiedieds |
| 17 | All as per item no 15 but approved species of Thujas |
| 18 | All as per item no 15 but approved species of Furcuria |
| 19 | Supply and planting border plantsDanus (Plant height 2-3 ft)including necessary earth work andproviding cow dung manure etc complete all as specified and directed. |
| 20 | All as per item no 19 but approved species of Blueemarald |
| 21 | All as per item no 19 but approved species of Latina Varities |
| 22 | All as per item no 19 but approved species of Bougainvillea varities |
| 23 | S & F Ornamental crotons palm likeRoyal Palm(Plant height 2-3 ft) including necessary earth work andproviding cow dung manure, brick edging around the plant complete. |
| 24 | All as per item no 23 but approved species of Fishtail Palms |
| 25 | All as per item no 23 but approved species of Foxtail Palm |
| 26 | All as per item no 23 but approved species of Viechiemowcry |
| 27 | All as per item no 23 but approved species of Queen Palm |
| 28 | NOTE for Item no 4 to 27 :-(a)Tree/plants will be obtain from nursery of AP Govt or as approved by GE. Paymentshall be made only for the plants found alive.(b) All plants,Hedge, Grass provided under Sch A Part-Ishall be maintained by watering, taking out weeds, manuring the organic manure at regular intervals, using chemical fertilizers, spraying pesticides etc. for healty growth including trimming branches/grass to maintain proper shape etc. all as per standard gardening practice up to certified date of completion of entire workby employing 01 No Mali (unskilled) per day of 08 hrs duration except on Sundays and holidays. Water shall be supplied by MES for maintaining the grass and plants. Contractor shall be responsible for all necessary arrangements for collection and conveyance of water from MES water supply points/ source up to 5 km from the site. Necessary water tanker with tractor,water browser ,PVC pipe,sprinkler etc required for watering purpose is the responsibility of the contractor.Manure and pesticide required for maintenance of the plant under the above mentioned itemsup to certified date of completion of entire work shall be the resposibility of the contractor. Quoted Rates shall deemed to include for all these aspect. |
| 29 | M&L for excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified |
| 30 | M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 31 | M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 32 | M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. |
| 33 | M & L for Vitrified, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc and set & jointed in neat cement slurry and 3mm wide joints shall be maintained with spacers which is to be filled with epoxy grout using masking tape and the masking tape is to removed after filling the epoxy grout including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 34 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 35 | All as per item no-16 here-in-before but fixed on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 36 | M & L for15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finish the surface even and fair without using extra cement complete all as specified and directed. |
| 37 | M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed. |
| 38 | Excavating in post holes (or similar holes) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete all as specified anddirected. |
| 39 | M & L for Plain cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 40 | S & F MS steel work in tubular trusses including special shapedwasher etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as speicfied and directed. |
| 41 | M & L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming toFe.290.Gde-E-165 (Brackets over 10 kg each to be measured under \"Structural Steel\") complete all as specified and directed. |
| 42 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed. |
| 43 | M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. |
| 44 | Supply , laying and testing 15 mm bore High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete towalls, ceilings or in floors etc complete all as specified and directed |
| 45 | All as per item no 44 here-in-before but 20 mm bore |
| 46 | All as per item no 44 here-in-before but 50 mm bore |
| 47 | S & F 15 mm bore, sprinkler, cast copper alloy, chromium plated with handle, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified and directed. |
| 48 | M & L for use & waste Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizonal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed. |
| 49 | M & L for Reinforced Cement Concrete M-25 Design Mix (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, and in shelves and the like etc complete all as specified anddirected. (Note: Reinforcement will be measured and paid seperately) |
| 50 | S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 51 | S&F for 3mm thickplain/designed coloured Aluminum Composite Panel Sheet for wall cladding/Roofing/Paneling upto 5 mtr height including necessary aluminium frame work, fittings & fixtures, including CNC laser cutting decorative design as per direction including necessary scaffolding work,suitable frame work for fixing ACP complete all as specified and directed. |
| 52 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 53 | M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 54 | M & L for 25 mm thick, plain cement concrete 1:2:4,type B-0 (using 12.5 mm graded stone aggregate)as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed. |
| 55 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) complete all as specified and directed. |
| 56 | Taking down Chowkats or frames with shutters exceeding 1.5 Sqm each n exc 4 sqm (Without taking off shutters from the frames) complete all as specified and directed. |
| 57 | S & F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i)Thickness of aluminium section shall not be less than 1.5 mm). |
| 58 | S & F Powder coated (minimum 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long (01 No), hinge type B-21, 100mm long (02 Nos) and suitable size of handle complete all as specified and directed. |
| 59 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 60 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.. |
| 61 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed |
| 62 | S&F 200 mm long extruded Aluminium alloy handles, fabricated type, anodised Complete all as specified and directed. |
| 63 | S&F 125mm Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 64 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floorcomplete all as specified and directed. |
| 65 | Supply only 4.00 mm thick, sheet glass, ordinary quality and glazing glazing withanodised aluminium snap beading or rubber/neoprene bead in square exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 66 | S & F 4.0 mm thick sheet glass frosted glass, ordinary quality and glazing with oil putty/ aluminium/ wooden beading in square not exc 0.5 sq. m in each pane all as specified and directed.. |
| 67 | S & FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed. |
| 68 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing. |
| 69 | S & F 125 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hingepin type B 22 complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed |
| 71 | S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 72 | S & F in repairs Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook, 15mm bore complete all as specified and directed.Make: Jaquar Cat No. ALD-565 or equivelant model of make as per List of manufacturer\"s metioned in PS |
| 73 | S & F in repairs, 15mm bore, bib taps, 2 way, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar Cat No.CON-041KN or equivelant model of make as per List of manufacturer\"s metioned in PS |
| 74 | S & F in repairs, Toilet Roll Holder, Stainless Steel ,fixed to wall with brass screw complete all as specified and directedMake: Jaquar Cat No. ACN-1151N or equivelant model of make as per List of manufacturer\"s as metioned in PS |
| 75 | S & F in repair 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated, high pressure with all fittings, screwed for iron pipe complete all as specified and directed. Make: Jaquar Cat No. CQT-23011 or equivelant of make as per list of manufacturer\"s as metioned in PS |
| 76 | S & F in repair 15 mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.Make: Jaquar Cat No.CQT-23059 or equivelant of make as per list of manufacturer as metioned in PS |
| 77 | S & F in repairs, Single Towel Rail 600mm Long, Stainless Steel with brackets, fixed Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed.Make: Jaquar Cat No. ACN-1111SM or equivelant of make as per list of manufacturer\"s as metioned in PS |
| 78 | S & F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 79 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain andflushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 80 | S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white,with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. |
| 81 | S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 82 | S & F in repairs, 40mm dia flexible PVC waste pipe, 800mm long for kitchen sink complete all as specified and directed |
| 83 | S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 84 | S & F in repair 75 mm bore, PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 85 | Suppy and fix 600 mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 86 | Supply, laying, connection and testing, in repairs 20mm outer dia 3- layer PP-R Polypropylene random copo-lymer) concealedpipes SDR 7.4 & PN16 stablised and antimi-crobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc complete all as specified and directed |
| 87 | S & F in repairs, 20 mm bore, gun metal Gate valves, with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. |
| 88 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 89 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls110mm borecomplete all as specified and directed. |
| 90 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenchs110mm borecomplete all as specified and directed. |
| 91 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and directed. |
| 92 | S&F PVC (SWR) bends any radius 110mmborecomplete all as specified and directed. |
| 93 | S&F PVC (SWR) bends any radius with access doors 110mm borecomplete all as specified and directed. |
| 94 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 95 | S & F 75 mm bore PVC (SWR) junction single (Single `T\") equal or unequal cement complete all as specified and directed. |
| 96 | S&F PVC (SWR) vent cowl 110mm borecomplete all as specified and directed. |
| 97 | M & L for PVC (SWR) gullytrap of 125/110 mm dia., outlet with grating including jointing with solvent cement complete all as specified and directed. |
| 98 | M & L for preparation of old ceiling surfaces and applying one coats of white wash complete all as specified and directed. |
| 99 | M & L for preparation of old wall surfaces and applying two coats of white wash complete all as specified and directed. |
| 100 | Taking down carefully serviceable/ unserviceable Split /Window type ACs of any Make, Model and capacity upto 2 tonne after disconnecting all connections, sunction/delivery pipe, Indoor and out door unit,stand etc complete all as specified and as directed. Note : Unserviceable Acs shall be deposited to MES store yard and taken on charge |
| 101 | Fixing only the serviceable old Window/Split type Acs(Indoor and out door unit) obtained from item no -100 at required locations after necessary servicing ,minor repair and testing complete all as specified and directed. |
| 102 | Supply and charging of R134A/R32/R22 refrigeration gas for all type of Acs complete all as specified and as directed. |
| 103 | Supply and fixing in repair copper pipe line heavy duty 5/8\" diawith insulation, flair nuts as sunction/ discharge pipe of split AC complete all as specified and directed. |
| 104 | Supply and fixing in repair copper pipe line heavy duty 3/8\" diawith insulation,flair nuts as sunction/ discharge pipe of split AC complete all as specified and directed. |
| 105 | Supply and fixingcopper pipe line heavy duty 3/8\" diawith insulation,flair nuts as sunction/ discharge pipe of TowerAC complete all as specified and directed. |
| 106 | Supply and fixing copper pipe line heavy duty 3/4 diawith insulation,flair nuts as sunction/ discharge pipe of Tower AC complete all as specified and directed. |
| 107 | Supply and fixing in repair copper pipe line heavy duty 1/4\" diawith insulation,flair nuts as sunction/ discharge pipe of split AC complete all as specified and directed. |
| 108 | Supply and fixing in repair copper pipe line heavy duty 1/2\" diawith insulation,flair nuts as sunction/ discharge pipe of split AC complete all as specified and directed. |
| 109 | S & F three core, PVC insulated, unsheathed, multistranded copperconductor cable, 1100 vols grade ISI marked of size 2.5 sqmm complete all as specified and as directed. |
| 110 | S & F three core, PVC insulated, unsheathed, multistranded copperconductor cable, 1100 vols grade ISI marked of size 4.0 sqmm complete all as specified and as directed. |
| 111 | S & F MS stand for mounting outdoor unit of Split Ac of capacity 1.5 Ton complete all as specified and as directed. |
| 112 | Supply and installation ofTower AC indoor and outdoor unit, 3.00 TR capacity , Minimum BEE 1 star rated ,three phase, 415 volt,50 Hz, 100% copper, High energy efficient rotary Compressor ,inbuilt air ioniser and plama filter with cordless remote control complete all as specified and directed. Make: Bluestar,Carrier,Voltas,LG, Daikin ,Hitachi |
| 113 | S & F 25 mm dia Rigid non-metalic PVC conduit exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and directed. |
| 114 | Prime Cost Sum :- The prime cost to be used as directed by the Accepting Officer vide Condition 1 (v) and 5 of IAFW-2249 (General Condition of Contracts) forming part of the tender documents.(a) Provide a prime cost of Rs.2,90,000.00 for Fountain of any type,shape and size including any type of electric pump/motor of suitabe HP andincluding suitable dia nozzles, all fitting and fixtures ,connections etc as approved by the accepting officer as per requirment .The pump shall be of make as approved by Accepting Officer. Fountain shall be purchased from manufacturer as approved by accepting officer. Approval of accepting officer shall be taken before purchase.(b) Bidder\"s/Contractor\"s quoted amount shall be inclusive of his overhead and profit and including all taxes and insert amount to cover all. The Bidder\"s/Contractor\"s is to quote lump sum amount under Column 6 covering all the aspects mentioned here in before, representing (%) percentage under Column 9, Above/Below (+ or - denomination) the Prime Cost Sum inserted by MES under Column 5. However, the quoted amount under Column 6 shall not exceed 15% (Fifteen Percentage) of Prime Cost Sum inserted by MES under Column 5. In case, the Bidder\"s/Contractor\"s quoted amount is in excess of 15% of the estimated amount, the same shall be restricted to 15% (Fifteen Percentage) and the amount quoted shall be corrected accordingly to work out the contract sum. |
| 115 | PART-II |
| 116 | Outsourcing services for day to day maintenance of all plants,Hedge, Grassprovided under Sch A Part-Iby watering, taking out weeds, manuring the organic manure at regular intervals, using chemical fertilizers, spraying pesticides etc. for healty growth including trimming branches/grass to maintain proper shape etc. all as per standard gardening practice for a period of two year from the certified date of completion of entire workby employing 01 No Mali (unskilled) per day of 08 hrs duration except on Sundays and holidays complete as specified and directed. Note :Water shall be supplied by MES free of cost for maintaining the grass and plants. Contractor shall be responsible for all necessary arrangements for collection and conveyance of water from MES water supply points/ source up to 5 km from the site. Necessary water tanker with tractor,water browser ,PVC pipe,sprinkler etc required for watering purpose is the responsibility of the contractor.Manure and pesticide required for maintenance of the plantfor two years shall be the resposibility of the contractor. Quoted Rates shall deemed to include for all these aspect. |
