Tender For Providing And Fixing Benches At Adarsh Nagar Ward No. 15/Clz.
Tender Value
3.96 Lakhs
Estimated cost
Bid Submission
04 Mar 2024
0 days left
EMD
9479
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rajpur → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing And Fixing Benches At Adarsh Nagar Ward No. 15 / Clz.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and Placing of precast RCC benches (chair bench with back Rest) using Cement Concrete grade M-30 consisting of 2 No. L-Shaped base support of thickness 100 mm having Back height 1000mm, front height 450mm and Base width 620mm having 5 No. of RCC planks1500x100x50 mm and one number plank of size 1500x200x50mm in the approved colour and shade; The minimum weight of MS Reinforcement bar in the base support will be 3.4 Kg having 4 Nos. 8 mm dia M.S. Bar distributed along the section and periphery of the legs with sufficient No. of 4 mm dia MS stirrups. Each base support will have 3 Nos. 12mm dia (2 Nos. 40mm and one number 65 mm long) galvanised coupling nuts welded suitably to the main reinforcement at appropriate locations so as to receive bolts for fixing of seats of concrete planks on base support and 3 holes to received carriage bolts for fixing back rest planks. The minimum weight of MS reinforcement bar in the plank of 200mm wide will be 4.4kg and of 100mm wide 2.9 kg. All the RCC Planks will have 2 holes of 14mm dia at appropriatelcation, so as to receive 12mm dia galvanized bolts for fixing on the base support. One of the planks of size 1500x100x50mm shall be engraved in the centre at the back with letterSDMC or as directed by Engineer-in-Charge, 2planks of size 1500x100x50mm and 1 plank of size 1500x200x50mm will be bolted to coupling nuts provided in the base support on both side with 2 number of 12mm dia and 65mm long galvanized steel CSK bolts and one Eva Washer for each bolt to form a seat;3 planks of size 1500x100x50mm will be bolted to coupling nuts provided in both the base support to form back rest with 6 nos. (Two Nos. in Each Plank) half threaded carriage bolts and nuts of size 165m long and 8mm dia with Eva and steel washers. The holes visible at the back side of the bench will be sealed with cement mortar after assembling. Side edges of all the planks shall be painted with acrylic bases paint of approved colour and shade and front portion of seating and back rest planks shall be polished to give glossy finish complete as per direction of Engineer-in-charge. |
| 2 | Providing and fixing stainless steel (grade: 304) S-type curved shape bench without back rest of approved design complete having finished seating width 430 mm, height 450 mm, and having four equally distanced legs/supports made up of stainless steel plate of geometrical shape of alphabet “x” of 14 SW gauge having width at top 430 mm, at center 220 mm, finished thickness 60 mm and height 510 mm as per approved drawing. the seat is to be made of 13 nos. of hollow stainless steel pipes of outer dia 15.88 mm and wall thickness of SW gauge 14 with required curvature of length 3.0 metre welded with argon welding with SS welding rods as per direction f Engineer-in-Charge. The bench is to be embedded in 60 mm thick cement concrete of grade 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size block of size 460x20x20 mm including excavation of pits for four concrete block complete as per drawing and direction of Engineer-in-charge. (Minimum weight of SS bench shall not be less than 50 kg per bench.) |
| 3 | Note: (i) For weight less than 50 kg, recovery on pro rate base shall be made |
| 4 | (ii) No payment shall be made for weight more than 50 kg. |
| 5 | (iii) Grade of steel for leg/support and pipe shall be got tested from authenticated laboratory for which no extra payment shall be made. |
AI Tender Summary
Tender Timeline
Mar 02, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 04, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 04, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
Completed