|
| 1 | Submersible pum ping machinery directly coupled with water proof suitable size motor having following specification and as Nit specification: Pump 10 HP/ 7.46 KWCAPACITY -20HP/15KWDuty Condition -110 CUM/HR head- 35-20 MT Shaft-Stainless Steelimpeller-SS/GM Outlet size-125 MM/ 100MM MOTOR submersible type 3 ph, 50Hz,415 Volt=-+/-10%2900 RPM Motor must be suitable for operation with star delta starter. Test certificate along with characteristic curve should be submitted at the time of delivery |
| 2 | 1.1 Kv grade 6 sqmm x3core water proof flat submersiblecable for above motor |
| 3 | Supply ,delivery of 415 v MCC cum PDB with minimum2mm thick epoxy painted sheet steel enclosed front open fully automatic cum manualcontrolmotor controlcenter for operation of pump motorin star/delta mode ,Conforming to IS-8623 with suitable busbsr, digital voltmeter, Ammeter, ContractorMCB,Starter with auto time switch & 1 no100 AMP TPN Main Switch etc15 to 25 HPwith SDS (Star delta Starter) |
| 4 | Supply and Delivery of the following valves, pipes etc.Supply ofMS seamless column pipe as per IS 1161 nominal Bore 150 mm dia with both side flangedthickness 5.5 mm3 Mt long |
| 5 | Heavy type suitable 150 mm MS suspension clamp along with nuts and bolts and washer |
| 6 | 150 mm dia CIDF sluice Valve-3 nos, Non Returned Valve - 1 no CIDF 90 degree bend -3 nos C.I Flanged Tee -2 no CIDF Flange pipe 1.0 Mt- 2no & 0.5 Mt -2 Nos, blank Flange - 1 No 150 mm dia flange socket tail piece -3 nos as per IS specification for construction of delivery pipe line and wash out line |
| 7 | Heavy type 300 mm dia split type tubewell cover with 12 mm thickclamping arrangement including holes of column pipe, and cable entry with 2 set s heavy type suspension clamp, nuts bolts and washer as depatmental design For protection of submersible cable |
| 8 | Supply and delivery of 100 ampsmale Female Kit kat fuse Unit |
| 9 | Installation of above pump motor, panel valves and specials as insl no -1,2 &3 including supply ofcable gland, sockets etc etc includingbrick, sand cement rod etc as reqd to complete the job as per direction and up to the entire satisfection of the EIC |
| 10 | Making suitable size pump foundation with supplying of necessary cement , sand and stone chipsincluding plastering and neat cement finish |
| 11 | Making double earthing arrangement in compliance with IE rules byG.I pipe electrode of 50 mm dia 3 mt long 2 nos of panel and pumping machinaries 25mm x 6mmG.I earthstrips from earth pit to panel and other accessories reqd toto complete thework |
| 12 | Making Internal electrification of pump House consisting two bracket point, one tube light point, two bulk head point, and 1 no 74 watt LED fixture with arm bracket at out side and one three pin plug point including supply of all necessary materials to complete the work as per IE rules and as per direction |
| 13 | Commissioning of the installation with full satisfection of EIC and trial run as per departmental operation & guarding by engaging skilled staff for 3 month |
