Pathar Angadi Angadiyil Ninnu Kumar Padi Vare Road Concrete W16 , Stone For Masonry Work , Portland Cement , Coarse Sand (Zone Iii) , Wall Form Panel 1250X500 Mm , Corner Angle 45X45x5 Mm 1.50 M Long , 100 Mm Channel Shoulder 2.5 M Long , M.S. Tube 40 Mm Dia , Sundries , Twisted Steel/Deformed Bars , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Royalty For Good Earth , Laterite Stone Of Size 35X20x20cm , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Red Oxide Zinc Chromate Primer , Adjustable Telescopic Prop 3 M (2.02-3.75M) , Beam Clamp 300-380 Mm (450-1070 Mm) , Second Class Kail Wood In Planks , Second Class Kail Wood In Scantling , Hollock Ballies 125 Mm Diameter , Adjustable Span Eso+Si (2.35-3.40) , Hollow Bloks Oof Size 40X20x10cm , Solid Blocks Of Size 40X20x15cm , Fine Sand (Zone Iv) , Stone Aggregate(Single Size): 40 Mm Nominal Size , Vitrified Floor Tile 60X60 Cm , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Plasticizer / Super Plasticizer , Production Cost Of Concrete By Batch Mix Plant , Pumping Charges Of Concrete Including Hire Charges Of Pump, Piping Work & Accessories Etc. , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x1.70 Mm , Wall Form Panel 1250X450xmm , Corner Angle 45X45x5 Mm 2.50 Long , Column Clamp 450X1070 Mm , Prop 2 M (2-3.5M) , Multi Surface Paint , Special Primer (C.W) , Mild Steel Round Bar Above 12 Mm Dia , Flats Up To 10 Mm In Thickness , Aluminium T Or L Sections , Chromium Plated Brass Screws 20 Mm , Powder Coating 50 Microns On Aluminium Sections , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Neoprene / Epdm Rubber Gasket , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , Powder Coated M.S. Butt Hinges 100 Mm X58 Mm X 1.9 Mm , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of
