Military Engineer Services-MES has published Tender For Additional/Alternator Of Kitchen And Cup Boards And Allied B/R Work In Md Accn At 7 Afh Kanpur Cantt. Submission Date for this Tender is 27-03-2024. Mobile Generator Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Mar-2024 | CORRIGENDUM NO. 01 | BOQ | 20-03-2024 |
| 2 | 20-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-03-2024 |
| Sl. No. | Item Description |
| 1 | S&F 15 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length including taking down existing pipes and connectioncomplete all as specified and directed. |
| 2 | All as peritem No 1above but bore of pipe20 mm |
| 3 | Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting not exc 10 cm girth complete all as specified and directed. |
| 4 | Dismantling of cast iron soil pipes jointed in cement mortar up to and including 100 mm dia complete all as specified and directed. |
| 5 | S&F of cast iron soil waste and vent pipes, sand cast pipe 75 mm dia, in any length with or without ears with lead joints fixed on walls complete all as specified and directed. |
| 6 | All as per item No 5 above but 100 mm dia pipe. |
| 7 | S&F in repairsCI bend(any radius) 75 mm dia , diminishing pieces or tapers with oval access door complete all as specified and directed. |
| 8 | All as per item No 7.00 above but 100 mm dia |
| 9 | S&F in repair cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) typeB-1 using 20 mm graded stone aggregate, 75 mm dia outlet complete all as specifiedand directed. |
| 10 | S&F in repairCast iron Nahni trap 75mm dia outletwith grating including jointing to waste pipe fixed in cement concrete type B-1 Type 1:2:4 diameter of out let pipe 100mm complete all as specifiedand directed. |
| 11 | S&F rotational moulded polythene water storage tank of capacity 750 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in position, including dismantling of old tank & removing complete all as specified and as directed. |
| 12 | M&L PCC 1:2:4 type B-1using 20 mmgraded stone aggregateas in kerbs , copings , bedplates, bases of tank padding / tank staging concrete etc. complete all as specified and as directed. |
| 13 | S&F in repair bib taps ,cast copper alloy ,fancy type long shank ,chromium plated with capstan ,head screwed down ,high pressure ,screwed for iron pipe 15 mm bore and fixed complete all as specified and directed. |
| 14 | S&F in repair fancy type chromium plated central hole basin mixer w/o pop up for 15mm bore pipes complete all as specified and directed. |
| 15 | S&F in repair 15 mm stop valves (concealed type) cast copper alloy, CP screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 16 | S&F in repairs 15 mm stop angle vavle cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 17 | S&F in repairs brass chromium plated grating of size 127 mm dia complete all as specified and directed. |
| 18 | S&F in repairchromium plated tubular towel rail 20mm dia "D" type 60cm long between flanges complete all as specified and directed . |
| 19 | S&F in repair chromium plated soap dish complete all as specifiedand directed. |
| 20 | S&F in repair wall mixture 15 mm dia with provision for over head shower with 115 mm long bend pipe on upper side connecting legs& wall flange, fixed with 15 mm GI pipecomplete all as specified and directed. Make : Cat No FLR-CHR-5273UPRof Jaquar or equivalent make as mention in Appx of PS. |
| 21 | S&F in repairGun metal globe or gate valves 20 mm dia with iron wheel head screwed both ends, for iron pipe and fixed complete all as specified and directed. |
| 22 | S&F in repair ball brass valves 20 mm dia high pressure with polythene float and flynut screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 23 | S&F in repairs vitreous china white squatting pan orrissa pattern size 630x450mm with integral foot rest including provision of lime concrete bedding complete all as specified and directed. |
| 24 | S&F in repair PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed toWCincluding PVC flush pipes ,brackets complete all as specified and directed. |
| 25 | S&F in repair Wash hand basin white vitreous china 550 x 400mm including necessary CP Waste fitting, waste pipe complete all as specified and directed. |
| 26 | S&F in Repair bevelled edged mirror 600mm & 400mm of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium platedbrass screws and cup washers etc complete all as specified and directed. |
| 27 | S&F in repair corner glass shelf 300mm (with brass brackets) of Cat No BEA-44 of make- Prayag or equivalent in Cera/Essco complete all as specified and directed. |
| 28 | S&F in repairPVC connection 15 mm dia 600 mm long with PTMT nuts at both ends fixed complete all as specified and directed. |
| 29 | S&F in repair kitchen sink with drainage board made of stainlesssteel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm includingwaste coupling & waste pipe complete all as specified and as directed. |
| 30 | S&F in repair stainless steel kitchen rack standard size (24x36x10) inch complete all as specified and directed. |
| 31 | S&F in repairs of Fancy type drapery rod with brackets 20-25 mm borewith bracket and fancy type nob on both end topcut to length as required of colour as selected & directed Note : The fancy type top of both ends to be provided of each length of curtain rod and the rate are included in running meter of drapery rod. |
| 32 | Demolition of cement concrete /lime concrete of any description and in any position not otherwise specifically provided for , such as sunken floor filling etc, complete all as specified and directed. |
| 33 | M&L 25 mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded aggregate) as in sub base for floorcomplete all as specified and directed. |
| 34 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to stores and rubbish off the premises. |
| 35 | M&L for joint free nonskid joint free 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n, exc 0.18 sqm in floor etc ceramic tiles of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces, over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed. |
| 36 | M & L for vitrified light shade tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc 0.36 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. |
| 37 | M&L forjoint free glazed ceramic joint free tiles in vertical surfaces 350 x250 x7mm/450x350x7mm thick of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces over and including backing10mm thick in CM 1:4 complete all as specified and directed. |
| 38 | Demolition ofstone slabs and tiles of any description or thickness in floor aprons, slabs and shelves etc laid in bedded in cement mortar |
| 39 | M&L of granite of (type and colour as approved) of 16-18mm thick rubbed and polished, edges rounded fully moulded in cooking plat forms, shelves and like in CM 1:4 including pointing in white cement 1:2 using marble dust and with admixture of pigment to match the shade of granite 20mm thick over and including screed bed15mm thick in CM 1:6complete all as specified and directed |
| 40 | S&F in repairsPVC (SWR) pipes 110 mm singlesocketedin anylength , withrubberring jointsfixed towalls includingnecessary iron clampsfixed on wall,roof complete all as directed. |
| 41 | S&F of PVC(SWR)bends /shoes110 mmcomplete all as directed. |
| 42 | Demolition of brick/stone masonry built in cementmortar complete all as specified and directed. |
| 43 | M&Lbrickwork withSub Class `B" bricks , straightor curvedon planexc 6 m meanradius built in CM 1:4 complete all as specified and directed. |
| 44 | Taking down cement plaster or brick or stone walls/ concrete surfaces including taking out joints, hacking for key, scrubbing down onwith water etc. |
| 45 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 46 | M&L for rendering 10 mm thick on fair faces of brick concrete surfaces in ceiling in CM (1:3) finish even and smooth without using extra cement complete all as specified and directed. |
| 47 | M&L rendering15 mm thick in CM 1:6 on fairfaces of brickwalls /concretesurfacefinishedeven and smoothwithoutusing extracement complete all as specified and directed |
| 48 | M&L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1 mm thick wall care putty, complete all as specified and directed. |
| 49 | M&L for preparation of new undecorated surfaces of walls and applying two coat of cement based paint over a coat of primer, all as specified and directed. |
| 50 | M&L for preparation of new surface of ceiling and applying three coats of white wash, all as specified and directed. |
| 51 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 52 | Taking down chowkhats or frames ( without taking off shutters from the frame exc 1.5sqm but n. exc 4 sqm each complete all as specified and directed. |
| 53 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet supplying & fixing in opening as per specification & drawing. |
| 54 | M&L for Factory made solidPVCmoulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thickMoulded prelam PVC sheet on the front face & 5mm plain colour PVC prelam sheet on back face and fixed in the frame at site as per specification & drawing . (Note : The unit rate quoted by contractorincludes 3 nos 75mm SS butt hinge, 2Nos 125mm handle, 100mm tower bolt, 1Nos 250mm aluminium sliding bolt,all other connected accessories in each door) |
| 55 | M&L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 56 | M & L for 35 mm thick factory made Second class hardwood glazed and skelton shuttersopen rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed. |
| 57 | S & F 40 mm thick factory made second class hard wood plain, framed, panelled shutters (any number of panels), with 12mm thick panels of veneered particle board or plywood or bison board. |
| 58 | S&F MS butt hinges , medium weight cold rolled of size 100 mm thick complete all as specified and directed. |
| 59 | S&Faluminium anodised sliding bolt 300mm long with hasp, staple (bolt type) and fixing of sheet, cast or extruded sections and fixing bolts complete all as specified and directed. |
| 60 | S&F aluminium anodised barrel tower bolt 200 mm longextruded section and fixed complete all as specified and directed. |
| 61 | S&Faluminium alloy anodised handle of size 150 mm fabricated type complete all as specified and directed. |
| 62 | S&Fstainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed. |
| 63 | S&F in repair 250mm size mild steel door springs complete all as specified and directed. |
| 64 | S & F 18 mm thick 100% Lead free both side plain laminated WPC sheet of any colour with using sunmica of choice colour on both sidefor kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacterer’s instruction and make approved by GEcomplete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges,lock etc for shutter should be included in quoated rated by the contractor. |
| 65 | S&F 19 mm thick MDF board, interior grade with both side decorative choice lamination fixed with screw to timber frame work as in shelves , Cup board shutter etc with all around lippingcomplete all as specified and directed. |
| 66 | S&F 30 mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed. |
| 67 | M&L for PCC (1:3:6) type C-1 (using 20mm graded agg) for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and as directed. |
| 68 | M&L for Framed work as grills with end bars shoulders/framed guard bars/gas bank/gate/framing barred iron doors,ladders,framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-410 or 310 complete all as specified and directed. |
| 69 | M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, complete all as specified and directed. |
| 70 | M&L for preparation of new wooden surfaces of any description exec 10 cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 71 | Dismantling mild steel windows/ventilators/grillof any description complete all as directed. |
| 72 | M&L for pressed steel window CRCA frame using profile 80x40x1.25mm thick & openable outside glass pane shutter & openable inside wirmesh shutter includedguard bar of 10mm MS squareframe complete with fixture & fitting such as box type hinges, peg stays glazing clips and handle, locking arrangement complete all as specified and directed by Engr-in-charge. Note:- 3 mm thick glass pane, SS wiremesh & guard bar/Grill included in above rates & PCC for pressed steel frame willbepaid separately. |
| 73 | M & L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping kerbs benching all as specified and directed. |
| 74 | S&F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces,perlin,rafter etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality "A", complete all as specified and directed. |
| 75 | S&F 2.00 mm thick plain mild steel sheeting as in steel gates, complete all as specified and directed. |
| 76 | M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats of oil emulsion distemper over a coat of primer over and including1 mm thick wall care puttycomplete all as specified and directed. |
| 77 | M & L for preparation of old treated surfaces of walls /ceiling etc and applying two coats of white wash complete all as specified and directed. |
| 78 | M & L for preparation of old wooden surfaces of any description and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 79 | M & L for preparation of old steel surfaces of windows and ventilators by oiling/greasing in hinges and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 80 | M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats ofexterior emulsion paint with anti algae weather proof, 100% Acrylic emulsion with silicon additives that offers and anti algae and high performance exterior wall finish over a coat of primer complete all as specified and directed |
| 81 | Taking down carefully aluminium point wiring (light, fans, socket etc) complete incl battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall/floor etc complete all as specified. |
| 82 | Material and labour for point wiring (concealed) forone light/Bell/Ceiling/Exhaust Fan pointcontrolled by one switch in and including rigid non-metallic PVC medium grade conduit 20mm dia size including cutting, chases for conduits, sunken boxes for concealed conduit with 1.5 sqmm PVC insulated unsheathed FRLS multi stranded copper conductor cable for phase and neutral with flush type metal boxes modular type suitable for fixing modular switches, sockets fan regulator etc. with white colour cover plate with brass screw and including PVC insulated unsheathed mulit stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specified complete all as specified and directed.(Note - Rates shall be deemed to be including mounting concealed boxes and modular cover plated of suitable module.) |
| 83 | All as per Serial item No 82 above but for one 3 pin 5 Amp switch socket outlet point on same board complete all as specified and directed. |
| 84 | All as per Serial item No 82 above but for one 3 pin 5 Amp switch socket outlet point on independent board complete all as specified and directed. |
| 85 | All as per ser item No 82 above but for one 3 pin 15 Amp switch socket outlet point on independent board using 2.5 sqmm PVC insulated unsheathed FRLS multi stranded copper conductor cable for phase, neutral and earth wire complete all as specified and directed. Note for iten No 1 to 5 (i) Rates shall be deemed to be including concealed boxes and modular cover plated of suiteble module. (ii) Necessary PVC rigid junction boxes for identifying junctions as required on site and as directed by Engineer-in-Charge for point wiring work with PVC dummy plates shall be deemed to be included in the quoted rate.(iii) Same size wire shall be used for phase neutral & earth conductors.(iv) The wiring shall be done strictly by following proper colour code, using red, yellow & blue for phase and black for neutral and green for earth. |
| 86 | S & F modular switch 1 way 6 Amp, 1 module, 240 Volt complete all as specified and directed. |
| 87 | S & F bell push modular switch 1 way 6 Amp, 1 module, 240 Volt complete all as specified and directed. |
| 88 | S & F modular switch 1 way 16 Amp, 1 module, 240 Volt complete all as specified and directed. |
| 89 | S & F modular socket outlet for 3 pin 6 Amp and 2 pin 5 Amp multi purpose, 2 module , 240 Volt complete all as specified and directed. |
| 90 | S & F modular socket outlet for 2 in 1,3 pin 6 &16 multi purpose ,2 module, 240 Volt complete all as specified and directed. |
| 91 | S & F modular fan regulator step type, 120w, 2 module , 240 Volt complete all as specified and directed. |
| 92 | S & F ceiling rose surface backelite three terminals, PVC/Polycarbonate, insulated body complete all as specified and directed. |
| 93 | S & F bell electric,240 volt, single pole complete all as specified and directed. |
| 94 | S & F Lamp holder, with 9 W LED bulb, 240 volt, PVC/Polycarbonate, with back plate suitable for batten fitting complete all as specified and directed. |
| 95 | S & F in replacement Metal clad single pole and a nuetralenclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp,240V complete (for geyser) complete all as specified and directed. |
| 96 | S & F in replacement Metal clad single pole and a nuetralenclosure with a two pin and earth plug and socket with one single pole MCB SP 32 Amp,240V complete. (for AC) complete all as specified and directed. |
| 97 | S&F in repair fluorescent tube light fitting complete energy efficient T-8 LED batten and integrated type signle tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as directed. |
| 98 | S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 99 | S&F in repair LED ligth fitting 9W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 100 | S&F in repair of security LED luminaire 36 w system with all accessories including GI mounting bracket of suitable size incl connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 101 | S&F Exhaust fan AC single phase 230/240volt of size 300 mm in sweep, metallic body complete with all accessories incl connecting up with three core flexible copper conductor cable of suitable size and making holes, groting nut bolts in wall for exhaust fan complete all as specified and directed including taking down old one & deposited in MES store yard complete all as specified and directed. |
| 102 | M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC conduit concealledwith all necessary fittings and accessories and 01xrun of PVC insulated and unsheathed single core cable multi stranded with copper conductor of size 6 Sqmm as continuous nuetral and earth wire (green in colour ) respectively, run through PVCconduit concealed and connected to the terminal and commonearth dollyall as specified and directed. (Note. Two run of cable and one run of PVC conduit concealled and one run of earth continuity wire shall be measured as one run complete all as specified.) |
| 103 | M&L for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC conduit concealledwith all necessary fittings and accessories and 01xrun of PVC insulated and unsheathed single core cable multi stranded with copper conductor of size 4 Sqmm as continuous nuetral and earth wire (green in colour ) respectively, run through PVCconduit concealed and connected to the terminal and commonearth dollyall as specified and directed. (Note. Two run of cable and one run of PVC conduit concealled and one run of earth continuity wire shall be measured as one run complete all as specified.) |
| 104 | S & F in repair ofVTPN distribution board, doule door 4 ways with including incomming 125 Amp MCCB , 16 KA,4 pole as incomerand suitable for fixing of MCBs as outgoing with IP-43 protection, with suitable lugs for incomer, cable glands and bottom lugs for outgoing distribution system all as specified and directed. |
| 105 | S & F in repair SP&N DBs, double door, 240 volt,8 way complete all as specified and directed. |
| 106 | S&F in repairIsolatorSPN , up to 63 Amp , 240 Volt complete all as specified and directed. |
| 107 | S&F in repair MCB SP upto 40 Amp ,240 Volt complete all as specified and directed. |
| 108 | M & Lfor Earthing complete with galvanized steel earth plate electrode 60 x60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GIand GI tubing 15mm bore, medium grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm reinforced with 8 mm dia TMT bars 100 C to C including one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing medium grade for watering ,charcoal and salt in alternate layers including excavation earth work complete all as specified and directed Electrical plate no 3 of SSR Part-I. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
