Tender For Special Repair To Certain Married Accommodation At 24 Ed Manauri
Tender Value
24.20 Lakhs
Estimated cost
Bid Submission
06 Apr 2024
0 days left
EMD
48400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
manauri → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Married Accommodation At 24 Ed Manauri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Apr-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster or cement lime plaster on brick or stone walls etc.Including raking out joints ,hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6 and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 5 | M & L for rendering 15 mm thick in cement plaster 1 : 4 mixed with liquid water proofing chemical (@ 200 ml per bag of cement) on fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- liquid water proofing chemical shall be measured & paid seprately. |
| 6 | Supply only liquid waterproofing chemical |
| 7 | M&L for preparing of new suface of wall and applying two coats of cement based paint over a coat of primer all as specified and directed. |
| 8 | M&L for preparation of old surfaces and applying twocoats of cement based paint as in walls complete all as specified and directed. |
| 9 | M & L for complete removal of existing treatment on walls, applying wall care putty not less than 2mm thick on old or new plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Eng-in-Charge. |
| 11 | M & L for 75mm ThickCement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified and directed by Eng-in-Charge. |
| 12 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) notexc 1.5 sqm each and removing from site complete all as specified and directed . |
| 13 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but notexc 4 sqm each and removing from site complete all as specified and directed . |
| 14 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. . |
| 15 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves complete all as specified and directed. |
| 16 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridges and valley gutters,fixed with self tapping screws as specified and directed. |
| 17 | S&F galvanised mild steel sheeting 0.63mm thick in valley gutter , drip and straight flashings (length and girth as fixed) fixed with L/J type hook or cranked hook bolt with grade of zince coating 275 including brass welding and shouldered joints complete all as specified and directed. |
| 18 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 19 | S&F rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafter and running rails etc complete conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 20 | M & L for preparation of new steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 21 | M & L for preparation of old steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 22 | M & L for preparation of new wooden surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 23 | M & L for preparation of old wooden surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 24 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 25 | Material & labour for false ceiling made out of 600 x 600 x 4mm thick non asbestos fibre fire resistant cement building board/ designer E- boardwith all finishes, made out of powder coated GI sheet main runner section of size 38x24x0.40 mm and cross tee of size 28x24x0.40 mm and angle size 24x24x0.40 mm including 3 mm GI wire for suspending bolts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap gridincluding provn of necessary holes/cutting for providing light/far as requiredcomplete all as specified &directed by Engineer in Charge. Make :- Armstrong or or equivalent make as per list of make Appx \"B\" duly approved by AGE(I). |
| 26 | M & L for PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in fixing of hold fast , coping etc complete all as specified and directed by Eng-in-Charge. |
| 27 | M & L for preparation of new steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F PVC solid door frame of size 50X47mm factory made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube as specified and as per manufacturer\"s instructionscomplete all as specified and directed. |
| 29 | S&F factory made solid panel PVC Door shutter 30mm thick (Style) consisting of Frame made out of mild steel tubes for top and bottom rails, mild steel frame shall becovered with heat moulded plain colour PVC \"C\" channel having a PVC Sheet Strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rails & bottom rail, paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and directed. |
| 30 | S&F factory made pressed steel frames of size 165x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one coat of primer complete all as specified and directed. |
| 31 | M & L for PCC 1:3:6 type C-1, using 20mm graded stone aggregate as in filling inside steel frame complete all as specified and directed by Eng-in-Charge. |
| 32 | S&F 30 mm thick flush shutter, solid core constructions with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 33 | M&L for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc and fitted to chowkats complete all as specified and directed. |
| 34 | M&L for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 35 | M&L for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 36 | M&L for steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 37 | S&F 12mm square bar framed welded into flat iron and similar work confirming to FE-290 Gde E-165 complete all as specified and directed. |
| 38 | S & F 3mm thick sheet glass ordinary quality glazing with oil putty or wooden beads area not exc 0.5 Sqm in each pane complete all as specified & directed. |
| 39 | S&Fgalvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. complete all as specified & directed. |
| 40 | S&F in repair 300 mm ordinary rat tail pattern springs including rod roller and with roller plate complete all as specified & directed. |
| 41 | S&F of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 42 | S&F of 125 mm long barrel tower bolt aluminium anodised of extruded section complete all as specified and directed. |
| 43 | S&F of 250 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 44 | S&F of 200 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 45 | S&F Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm longcomplete all as specified and directed . |
| 46 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed . |
| 47 | M & L for coloured Non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed . |
| 48 | M & L for coloured Non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed . |
| 49 | M & L for coloured glazedjoint free Ceramic tiles300x450x7mm thick with colour & design as per direction of Engr in charge fixed as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick in cement plaster 1 : 4 as backing coat for fixing tiles complete all as specified and directed . |
| 50 | S&F in repair 15mm bore stop valve fancy type , cast copper alloy chromium plated with capstan head screwed down,screwed for iron pipe or for brass ferrule and fixed all as specified and directed. |
| 51 | S & F in repair PVC valveless, syphonic action type, flushing cistern, low level, white colour capacity 10 liters with inlet and outlet, ball valve, handle including 32 mm bore PVC flush pipes & PVC connection pipe compete all as specified and directed. |
| 52 | S & F in repair vitreous china WHB white colour of size 600x480mm flat back or angle back type including angle iron bracket waste coupling PVC waste pipe 32mm dia 60cm long fixed pinning in ends of brackets complete all as specified and directed. |
| 53 | S&F in repair 600x450 mm beveled edge mirror selected quality glass, mounted on 6mm thick AC building boards or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers, complete all as specified and directed. |
| 54 | S&F in repairs 15mm bore Pillar taps,chromium platedwith capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed. |
| 55 | S &F PVC connections 15mm size with PTMT nut of length 600mm long complete all as specified and directed. |
| 56 | S&F in repairs grating doom 125mm dia with waste hole of PTMT(min weight 40 gms) complete all as specified and directed. |
| 57 | S & F in repair Vitreous China wash down water closet pan white colour (pedestal pattern), with seat cover,flushing pipe 32mm dia for low level flushing cistern including padestal pan & trap,including connection to drain and to flushing pipe anti syphonage pipe etccompete all as specified and directed. |
| 58 | S & F in repair Vitreous China water closet (squatt pattern) \"Orissa Pattern\" size 580x440mm white with trap and integral foot rests complete including provision of lime concrete beddingcompete all as specified and directed. |
| 59 | S&F in repair 15mm bore Bib taps, cast copper alloy chromium plated with capstan head screwed down,screwed for iron pipe or for brass ferrule and fixed all as specified and directed. |
| 60 | S&F in repair 110/100mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 61 | S & F in repair health faucet (ABS body) mild steel CP suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in positioncompete all as specified and directed. |
| 62 | S & F in repair brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union compete all as specified and directed. |
| 63 | S&F in repair angle valve 15 mm dia chromium plated cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 64 | S&F in repair High density polyethylene (HDPE) pipes 32/40mm dia of pressure rating 6 kgf/sq. cmcomplete all as specified and directed. |
| 65 | S&F in repair SS Soap dish (160x160x90mm), any type, fixed to plugs with chromium plated plugs with brass screws compete all as specified and directed. |
| 66 | S&F in repair CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 67 | Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 15 mm dia pipe complete all as speicified and directed. |
| 68 | M & L for GI Tubingmedium grade 15 mm bore of pipe, with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed. |
| 69 | All as per item no 68 above but except pipes. (GI pipe retrieved from item no 67 shall be reused) |
| 70 | Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 20 mm dia pipe complete all as speicified and directed. |
| 71 | M & L for GI Tubingmedium grade 20 mm bore of pipe, with all fitting and fixed complete to walls, ceilings or laid in floors complete all as speicified and directed. |
| 72 | All as per item no 70 above but except pipes (GI pipe retrieved from item no 70 shall be reused) |
| 73 | M & L for Waste coupling of PTMT (half or full threaded) 40mm dia (Minimum weight 60 gms) complete all as specified and directed |
AI Tender Summary
Tender Timeline
Mar 30, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 06, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 06, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 15, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender