Public Works Department-PWD has published Repairing, Upgradation Of Lifts On 10 Fob’S, Security / Operation / Comprehensive Maintenance Of Lifts, Housekeeping And Comprehensive Maintenance ( Civil & Electrical ) Of 10 Nos. Fob’S ( Bhairon Mandir, Modi Mill, Prahladpur, Ns. Submission Date for this Tender is 15-03-2024. Passenger Lift Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Mar-2024 | Corrigendum | Date | 15-03-2024 |
| 2 | 06-Mar-2024 | Corrigendum | Technical Bid | 15-03-2024 |
| 3 | 07-Mar-2024 | Corrigendum No. 3 | Technical Bid | 15-03-2024 |
| 4 | 09-Mar-2024 | Corrigendum No. 4 | Technical Bid | 15-03-2024 |
| Sl. No. | Item Description |
| 1 | SH-I Upgradation OF LIFT at Jungpura FOBUpgradation and Supplying, installation, testing & commissioning of 13 passengergearless machine room less lifts in the existing shaft havingspeed of 1.0 meter per second serving different floors in the size of lift well 2450 mm wide X 1850mm depth as per detailed specifications attached and as under complete with all the equipment and accessories.(i) Speed _______________ 1 MPS(ii) Floors2 (G + 1)(iii) Travel 6- 9Meters (approx.) (iv) Stop & opening 2(G + 1) (v) Controller: A.C. variable voltage & variable frequency. (vi) Automatic rescue device complete with dry maintenance free batteries as required. (vii) Operation: Microprocessor based simplex collective selective with/ without attendant. (viii) Power - 415 V, 3 phase, 50 Hz, 4 wires system (ix) Type of doors (a) Car : Power operated, centre opening stainless steel scratch proof (moon rock/ hair line finish) (b) Minimum 1.5mm to 2mm thick Landing doors : Power operated, Centre opening stainless steel scratch proof. x) Car:- Stainless steel scratch proof Minimum 1.5mm to 2mm thick Stainless steel. xi) The lift should be suitably equipment for disable person and complete with Braille button. xii) Flooring:- PVC floor 3mm thick with approved pattern and proper range isolation. xiii) Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. |
| 2 | xiv) Battery operated emergency light and alarm bell xv) Full height infra red door screen. xvi) Fire main switch, false ceiling in car, vandal proof SS button, over load warning indicator , floor annunciator with music, pit ladder.(ceiling should be suspend laser cut with diff used light setting and pressure fan mounted on the roof (hidden) xvii)Car Fittings - LED Light & Regular Circular Fan Car side< vibration finish with mirror finish center band. Car recast panel-Vibration finish with mirror finish center band. Car return panel- Vibration finish Car door-Mirror finish. Incase of power failurethe batter should be able to run led light, exhaust for atleast 1 hr. Buy back of the dismantled material complete etc. as reqd. |
| 3 | FOB Lift at Jungpura(Schindler Make ) |
| 4 | FOB Lift at Modi Mill & Bhairon Mandir (Schindler Make ) |
| 5 | SH:- II Repairing of Lift (Johnson make & Schindler Make ) Supplying & Fixing of Following accessories in 13 Passenger existing lift i/c testing and commissioning of lift after repair i/c buy back of Dismantled items etc. complete as reqd. |
| 6 | Krishi Vihar FOB Johnson make 13 Passenger Lift(Lift No1:-L-O5496 & Lift No.2:- L-O5497) (a) Type B-Buffer Spring Assy =1 No. (b) Filler Weight CI-51 KG=32 Nos (c) Logic Board For ( C) ARD 25 PIN=1 No. (d) Power Board for( C) UPS =1 No.(e) FRC interface cable for ( C) make ARD Logic Board to Power Board =1 No. (f) ARD Battery (12V-18AH) =4 Nos.(g) Door Drive VVVF Assy with harness FR Cable for BST BG301 Drive Common LM900/LM1200 & LM2500 =1 No.(h) Door Motor -195 RPM /47Watt =1 No. (i) SMPS 24V, 6.5A-Delta =1 No.(j)Car Top Statiopn Board for SP3 Serial Comm. Controller, SG-CTB-A =1 No. (k) Spring Buffer Stool Assembly-100mm L for "A&B"- Type Buffer Spring 07-97-SB-0-6-100-000-AB-00=1 No.(l) C. WT Guard Fixing Bracket Assy 07-90-21-18012-01-00 =8 Nos.(m) C. WT Guard For Combin 07-90-26-685-06 =1 No. (n) Buffer Spring Assy E 07-97-E-02-00=1 No. |
| 7 | Chirag Delhi FOB Lift No.1 Johnson make13 Passenger Lift :-L-M9173-P01(a) LED Ceiling Light, Cool white, astra Prime 5W,240V,50Hz, 300 LM 6500K, Philips =3 Nos (b) Battery-Amaron-12V-18AH=4 Nos.(c) Filler Weight CI-51 KG=6 Nos |
| 8 | Chirag Delhi FOB Lift No.2 Johnson make13 Passenger Lift :-L-M9174-P01(a) Battery-Amaron-12V-18AH=4 Nos.(b) Filler Weight CI-51 KG=20 Nos |
| 9 | Sheikh Sarai FOB Lift No.1 Johnson make13 Passenger Lift :-L-M9171-P01 (a) LED Ceiling Light, Cool white, astra Prime 5W,240V,50Hz, 300 LM 6500K, Philips =3 Nos (b) Battery-Amaron-12V-18AH=4 Nos.(c) Filler Weight CI-51 KG=10 Nos |
| 10 | Sheikh Sarai FOB Lift No.2 Johnson make13 Passenger Lift :-L-M9172-P01 (a) LED Ceiling Light, Cool white, astra Prime 5W,240V,50Hz, 300 LM 6500K, Philips =3 Nos (b) Logic Board for Johnson Make ( C) ARD 25 PIN 1.5 KVA & 2.5KVA =1 No. (c) Power Board for Johnson Make ( C) UPS =1 No. (d)D & PI Cum DN Push Button Cover Assy =1 No.(e)Battery-Amaron-12V-18AH=4 Nos.(f) Filler Weight CI-51 KG= 27 Nos |
| 11 | JungPura FOB15 Passenger Schindler make Lift(Lift No1:10662997)(a) Oil Lubricator BFK 5…10 =2 Nos. (b) Stopper Sheet =2 NOs.(c) Module VVVF5+ drive T2L/C2 EU/NA =1 NO.(d)DR-VCB025_400_C_BP_W_CE_VAS_02.04 =1 NO.(e)PCB SDIC 53.Q =1 NO. =1 NO. (f) LOP GS 100M-2WSF Assembled =2 NOs. (g) Set Motor VVVF =1 NO.(h) Emergency Light unit Shree Engineers=1 NO. |
| 12 | NSIC FOB (Lift No1:20085916)(a) ODR VAF013_H_480_SY_R_W_CEUL_01.03 =1 NO. (b) PCBA SCMAIN 14.S =1 NO. (c) PCBA SCPOWH 11.Q =1 NO. (d)PCBA SCAES 11.Q =1 NO.(e) Acid-lead Battery 12V/12Ah Faston 6.3 =2 NOs.(f) Exista 4 LED Spot Kit with LGS Spot =1 NO. |
| 13 | NSIC FOB (Lift No2:20085917)(a) PCBA SCMAIN 14.S =1 NO.(b) PCBA SCAES 11.Q =1 NO. |
| 14 | SH:-III (Comprehensive Maintenance ofJohnson/ Schindlermake Lifts Installed at FOB"s Comprehensive maintenance of 13 passenger lifts installed at Various FOBi/c preventive and break downmaintenance i/c repair/replacement of warnout items with minimum downtime and warranty & guarantee of repaired and replaced item etc as reqd. (Nothing extra shall be paid on account of maintenance whatsover during this comprehensive maintenance period) |
| 15 | FOB Near Jungpura- 2 Nos. lifts 13 / 15 passenger capacity |
| 16 | For First Year |
| 17 | Lift No-1 |
| 18 | Lift No-2(Free Maintenance period) |
| 19 | For 2nd Year |
| 20 | Lift No-1 |
| 21 | Lift No-2 |
| 22 | For 3rd Year |
| 23 | Lift No-1 |
| 24 | Lift No-2 |
| 25 | FOB NearChirag Delhi- 2 Nos. Johnson make lifts 13 passenger capacity |
| 26 | For First Year |
| 27 | Lift No-1 |
| 28 | Lift No-2 |
| 29 | For 2nd Year |
| 30 | Lift No-1 |
| 31 | Lift No-2 |
| 32 | For 3rd Year |
| 33 | Lift No-1 |
| 34 | Lift No-2 |
| 35 | FOB Near Sheikh Sarai - 2 Nos. Johnson make lifts 13 passenger capacity |
| 36 | For First Year |
| 37 | Lift No-1 |
| 38 | Lift No-2 |
| 39 | For 2nd Year |
| 40 | Lift No-1 |
| 41 | Lift No-2 |
| 42 | For 3rd Year |
| 43 | Lift No-1 |
| 44 | Lift No-2 |
| 45 | FOB Near Krishi Vihar - 2 Nos. Johnson make lifts 13 passenger capacity |
| 46 | For First Year |
| 47 | Lift No-1 |
| 48 | Lift No-2 |
| 49 | For 2nd Year |
| 50 | Lift No-1 |
| 51 | Lift No-2 |
| 52 | For 3rd Year |
| 53 | Lift No-1 |
| 54 | Lift No-2 |
| 55 | FOB Near Bhairon Mandir- 2 Nos. lift13 passenger capacity |
| 56 | For First Year |
| 57 | Lift No-1(Free Maintenance Period ) |
| 58 | Lift No-2 |
| 59 | FOB NearModi Mill - 2 Nos. Schindler make lifts 13 passenger capacity |
| 60 | For First Year |
| 61 | Lift No-1(Free Maintenance Period ) |
| 62 | Lift No-2 |
| 63 | For 2nd Year |
| 64 | Lift No-1 |
| 65 | Lift No-2 |
| 66 | For 3rd Year |
| 67 | Lift No-1 |
| 68 | Lift No-2 |
| 69 | FOB Near Pulpehladpur (Shiv Parbati) - 2 Nos. Johnson make lifts 13 passenger capacity |
| 70 | For First Year |
| 71 | Lift No-1 |
| 72 | Lift No-2 |
| 73 | For 2nd Year |
| 74 | Lift No-1 |
| 75 | Lift No-2 |
| 76 | For 3rd Year |
| 77 | Lift No-1 |
| 78 | Lift No-2 |
| 79 | FOB Near NSIC - 2 Nos. Schindler make lifts 13 passenger capacity |
| 80 | For First Year |
| 81 | Lift No-1 |
| 82 | Lift No-2 |
| 83 | For 2nd Year |
| 84 | Lift No-1 |
| 85 | Lift No-2 |
| 86 | For 3rd Year |
| 87 | Lift No-1 |
| 88 | Lift No-2 |
| 89 | SH:-IV (Operation of Lifts of FOB"s) Providing Services for operation and security of Lifts installed at FOBs, running & operation of other electrical installation including routine checking to ensure smooth functioning of the E & M components and providing immediate assistance during emergency situation including watch & ward of complete FOBs including its Lift, Electrical Installations, Lightings, Electrical Panels, DB"s & allied equipment"s, Civil components etc by deploying adequately trained & experienced staff, as detailed below, and as per terms & Conditionsetc., in the tender document, complete as required.(Note1:- In case of theft from the site of any FOB, whole responsibility shall rest with the Contractor and he must replace the same item within reasonable time to the satisfaction of Engineer-in-Charge, otherwise necessary recovery will be made as per actual basis). Note 2:- The payment against this item shall be released in proportion to the weightages given every fortnight in line with performance criteria mention in NIT Page No. 60. |
| 90 | FOB Near Jungpura a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 91 | FOB Near Chirag Delhi a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 92 | FOB Near Sheikh Sarai a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 93 | FOB Near Krishi Vihar) a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 94 | FOB Near Bhairon Mandir a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 95 | FOB Near Modi Mill a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 96 | FOB Near Harkesh Nagar a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 97 | FOB Near Aali Gaon a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 98 | FOB Near Pulpehladpur (Shiv Parbati) a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 99 | FOB Near NSIC a) Lift Operator cum watchman - 2 Nos.(6 AM to 2 PM and 2 PM to 10 PM,1 Nos. in each shift). b) Security Guard with Gun - 1 No. (For shift between 10 PM to 6 AM) |
| 100 | (Maintenance of Electrical Installations of Subways & FOB"s) Routine maintenance of electrical installation / accessoriesat various Subways & FOBsi/c cleaning and checking of all accessories of the system etc asrequiredenclosedin all days of week i/c Sunday and holidays by deputing minimum following staff. (As per Attached Annexure "B") |
| 101 | Wiremen cum E & M Operator -1 No. (General shift)Khallasi-1 Nos. (General shift) |
| 102 | SH:-V (Cleaning of All FOB"s) Providing services of mechanized cum manual housekeeping job onall Foot over Bridges for all days including Sundays, Saturdays and Gazetted Holidays except National Holidays (i.e. 26th January, 15th August & 2nd October) including cost of labour, machinery, T&P, consumables etc. as per tender conditions comprising but not limited to the following main activities:- (a) Comprehensive mechanized cum manual cleaning and housekeeping of FOB deck floor, Staircases, lift well and lift floor, lift pit, FOB ceiling and roof, Roof of Lift Pit, area under staircases, railing, under deck of FOB, LIft car, Lift lobby and lift door, and all other spaces and all civil and Electrical inventories inside and outside the FOB Structure including mechanized sweeping, moping, scrubbing, dusting, façade cleaning, doors & windows cleaning, etc. up to entire satisfaction and as per direction of Engineer in Charge. The scope of work also includes removal of posters etc. with application of cleaning equipemnts, liquids as per roster and frequency decided by the engineer in charge. (b) Mechanized, automated and manual housekeeping and cleaning job of outer areas of FOBs including the area under staircase, deck etc. as per direction and up to satisfaction ofEngineer in Charge. (C) Collection of all types of garbage, waste materials, dirt, malba etc. from the FOBs and disposal of the same to approved municipal dumpig ground on regular intervals up to entire satisfaction and direction of Engineer in Charge. (D) The cost of deep cleaning ( as per requirement and direction by Engineer-in-Charge) at the start of work is deemed to be included in this rate. E) The rate is for one FOB per month and shall be proportioned as per weightage given every fortnight in line with performance criteria mention in NIT Page No. 60 |
| 103 | SH:-VI (Electrical Works) Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 104 | 3 x 1.5 sq. mm |
| 105 | 6 x 1.5 sq. mm |
| 106 | 3 x 4 sq. mm |
| 107 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 108 | 20 mm |
| 109 | 25 mm |
| 110 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 111 | 6 Module (200 mmX75 mm) |
| 112 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 113 | 15/16 A switch |
| 114 | 6 pin 15/16 A socket outlet |
| 115 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 116 | 100 A, 16 kA,TPMCCB |
| 117 | 250 A, 25 kA,TPMCCB |
| 118 | 400 A, 35 kA,TPMCCB |
| 119 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 120 | Single pole |
| 121 | Triple pole and neutral |
| 122 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 123 | 63 A |
| 124 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 125 | 2 + 6 way, Double door |
| 126 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 127 | 63 A |
| 128 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 129 | 63 A |
| 130 | Supplying & Laying and fixing of following sizes PVC insulated and PVC sheathed / XLPE aluminium conductor armoured power cable of 1.1 kV grade on wall surface as required. |
| 131 | 3 x 10 sqmm |
| 132 | 3.5 x 50 sqmm |
| 133 | 4 x 25 sqmm |
| 134 | Supplying and laying of following sizes PVC insulated and PVC sheated/XLPE aluminium conductor armoured power cable of 1.1 KV grade in the existing HDPE/GI pipe etc. as reqd. |
| 135 | 3 x 10 sqmm |
| 136 | 4 x 16 sqmm |
| 137 | Supply & fixing of 1 No, 70-100Amp, TP Power Contactor i/c connections, testing & commissioning etc complete as reqd . (L&T ML-4 or equivalent) in the existing panel. |
| 138 | Supply & fixing of daily weekly programmable electronic 240V AC digital time switch, 50/60Hz i/c connections, testing, commissioning and i/c credit/buyback for old dismantle material etc complete as reqd. |
| 139 | Credit for dismantle materials |
| 140 | Assorted 2x2 36watt LED fittings |
| 141 | Assorted Ceiling fan |
| 142 | Assorted Contactor |
| 143 | Assorted SP MCB/DP |
| 144 | Assorted :Ex. Fan |
| 145 | Assorted : Wall Fan |
| 146 | SH:-VII (CivilWorks)Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : |
| 147 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 148 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 149 | On steel work |
| 150 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : |
| 151 | Dark shade pigment using ordinary cement |
| 152 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 153 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. |
| 154 | (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 155 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 156 | 25 mm thick |
| 157 | Granite work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the granite shade (To be secured to the backing by means of cramps, which shall be paid for separately). |
| 158 | 18mm thick Granitestone slab of any colour and shade |
| 159 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 160 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 161 | Providing & fixing 5 mm thick coloured Polycarbonate sheet in approved pattern over existing M.S frame including required accessories wherever required etc. Complete as per direction of Engineer-in-charge. |
| 162 | Granite work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the granite shade (To be secured to the backing by means of cramps, which shall be paid for separately). |
| 163 | 18mm thick Granitestone slab of any colour and shade |
| 164 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverableseparately). |
| 165 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 166 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
