Military Engineer Services-MES has published Tender For Additional/Alternator To Otm Accommodation And Special Repair To Road At Patiala Mil Stn. Submission Date for this Tender is 21-03-2024. Road Work Tenders in patiala Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material & labour for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in CEMENTmortar 1:4 including mixing of liquid water proofing compound as per manufacturer"s instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and as directed by Engineer-in-Charge. Note : WPC and chicken wire gauge will be measured and paid separately. |
| 3 | Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. |
| 4 | Material & labour for cement plastering 10mm thick in CEMENTmortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material & labour for cement plastering 5mm thick in CEMENTmortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 7 | Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 8 | Material & labour for Applying two coats of oil bound distamper white or tinted over a coat ofprimer on walls incl one coat of primer over & incl preparation of plastered finished of wall specified and directed by Engineer-in-Charge. |
| 9 | Material & labour for Preparation of plastered surfaces of wallsand applyingtwo coats of cement base paint over a coat of primer , complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & labour for preparation ofplastered surfaces of wall and applying three coats of white wash , complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & labour for preparation ofplastered surfaces of ceiling and applying three coats of white wash , complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 13 | Material & labour for preparation of old steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 14 | Material & labour for Preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 15 | Material & labour for Preparation of old wood surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 16 | Material & labour for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcherwith cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. |
| 17 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified. |
| 18 | Material & labour for Brick work with sub class "B" bricks straight or curved on plan exceeding 6m mean radius bulit in C:M 1:6 all as specified. |
| 19 | Material & labour for Precast Reinforced Cement concrete Type B0 (Using 12.5 mm graded stone aggregate) in 50 mm thick Jallies or louvers including all mouldings complete and set in Cement Mortar 1:4 |
| 20 | Demolition of cement concreteun -reinforced in ground floors and pavings complete all as specified and directed. |
| 21 | Material & labour for machine cut Kota stone slab flooring 20-25 mm thicklaid over 20 mm thick cement mortar 1:6 screed bed laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete to be fixed in any position as described and specified. |
| 22 | Material & labour Glazed ceramic coloured tiles 6 to 7 mm thick matching to the shade of kota stone (light grey colour) on vertical surface such as skirting,dado etc. over and including 10mm thick rendering in CM 1:4 thick set and jointed in neat cement mortar and pointed in colour cement to match tiles complete all as specified and directed by Engineer-in-charge. |
| 23 | Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises |
| 24 | Material & labour for Non - skid coloured Ceramic tiles 7 to 8 mmthick (square/ rectangular) area of Each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cementslurry over and incl 15 mm thick cement mortar (1:4) screed bed and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material & labour for Glazed ceramic coloured printed/digitaltilesof size450x300mm 7mm thick(square/ rectangular) ,onvertical surface such as skirting , dado etc. over and including 10 mm thick rendering in cement mortar 1:4 thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material & labour for Non - skid Ceramic tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over and including 15 mm thick rendering in cement mortar 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & fixing stainlessHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc for curtain rod incl all fixing complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & fixing for 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane. |
| 29 | Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes and making good reqd shape for hold fast block for new frame complete all as specified directed. |
| 30 | Supply & fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 31 | Supply & fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing along with necessary aluminium mongaries for fixing of door,complete all as specified and directed by Engineer-in-Charge. (a) Stainless Steel (304 Grade) Butt Hinges 150mm -3 nos per leaf (b) Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Aluminium Handles 150 mm - 2 nos per leaf |
| 32 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified. |
| 33 | Supply & fixing Mild Steel Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,size 105x60mm including filling of PCC 1:3:6, using 12.50 mm graded aggregatein chowkhatsand PCC 1:2:4 B1 as in hold fasts blocks including necessary form work complete as specified, |
| 34 | Supply & fixing factory made flush shutters 30mm thick, 7 Ply,solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 35 | Supply & fixing Butt hinges 100 mm size, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed. |
| 36 | Supply & fixing Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 37 | Supply & fixing Aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and directed. |
| 38 | Supply & fixing Floor door stopper of size 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed. |
| 39 | Supply & fixingfor 4 mm figured glass sheet ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified. |
| 40 | Supply & fixing vitreous china premium/1st quality wash basin white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union andincl 32mm brass CP waste coupling and completein all respect as per manufacturer"s instructions and taking down existing of any description/size all as specified. |
| 41 | Supply & fixing vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F.and taking down existing of any description/size complete in all respect all as specified. |
| 42 | Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 43 | Supply & fixing vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including and taking down existing of any description/size complete in all respect all as specified. |
| 44 | Supply and fixing 100 mm Cast iron Traps ‘P’ or ‘S’ , 600mm long,complete all as specified and directed. |
| 45 | Supply & fixing flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. |
| 46 | Supply & fixing bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup .complete fixed in position all as specified and directed. |
| 47 | Supply & fixing Vitreous China Urinal, full stall type, white (with flush pipe and waste pipe) including Brass chromium plated inlet and outlet screwed for pipe or connections with CP Spreader includingnecessary packing, union and cap and fixed as specified. |
| 48 | Supply & fixing vitreous china urinal partition white of size 310x700 mm incl all necessary fittings complate all as specified and directed. |
| 49 | Taking up or down existing steel tubing and connections, 15mm or 20 mm bore complete all as specified. |
| 50 | Taking up or down existing steel tubing and connections, 20 mm bore complete all as specified. |
| 51 | Supply & fixing 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc including taking down existing pipe complete all as specified. |
| 52 | Supply & fixing 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc including taking down existing pipe complete all as specified. |
| 53 | Supply & fixing overhead shower 125mm size with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified. |
| 54 | Supply & fixing towel rail 20mm dia,D type, 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified. |
| 55 | Supply & fixing Bib taps,CP,fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. |
| 56 | Supply & fixing Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs all as specified. |
| 57 | Supply & fixing Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. |
| 58 | Supply & fixing Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. |
| 59 | Supply & fixing doubled layered rotational moulded polyethylene white water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified and directed. |
| 60 | Supply & fixing 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified. |
| 61 | Supply & fixing PVC connections 15mm size with brass nuts of length 450mm complete all asspecified and directed. |
| 62 | Supply & fixing Cast iron soil, waste and vent pipe, 100mm bore, sand castin any length, with or without ears, with cement joints,fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections hight upto 12mtr complete all as specified after taking down of existing unserviceable pipe fixed in repair complete all as specified and directed. Note : Scaffolding, T&P, Safty measures (Belts + ropes + ladders) should be included in all BOQ rates for Min 12 mtr height. (Not paid seperately). |
| 63 | Supply & fixing Cast iron soil, waste and vent pipe, 100mm bore, sand castin any length, with or without ears, with cement joints,laid in trenches or in floors complete all as specified after taking down of existing unserviceable pipe fixed in repair complete all as specified and directed. |
| 64 | Supply & fixing Cast iron soil, waste and vent pipe, 75mm bore, sand castin any length, with or without ears, with cement joints,laid in trenches or in floors complete all as specified after taking down of existing unserviceable pipe fixed in repair complete all as specified and directed. |
| 65 | Supply & fixing for cast iron branch pieces singleCentrifugal type (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 100 mm bore pipe, fitted with oval access doorjointed with lead joint, complete all as specified. |
| 66 | Supply & fixing for CI CowlCentrifugal type suitable for 100 mm bore pipe as in repair, complete all as specified. |
| 67 | Supply & fixing for Cast iron bends/Tee duck foot or heel rest, radiusfor 75 mm bore pipe, complete all as specified and directed. |
| 68 | Supply & fixing for Cast iron bends/Tee duck foot or heel rest, radiusfor 100 mm bore pipe, complete all as specified and directed. |
| 69 | Supply & fixing for PVC(HDPE) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc includingtaking down existing damaged CI rain water pipe complete all as specified and as directed |
| 70 | Supply & fixing PVC (SWR) bends/tees of any radius for 110mm bore as in repair complete all as specified. |
| 71 | Supply & fixing Salt-glazed stoneware gully traps,Centrifugal type 150x150mm size,square or round mouthed, type "P" or "S" incl CI grating fixed in repair complete all as directed and specified. |
| 72 | Supply & fixing Cast iron multifloor trap 110mm dia and 600mm long including jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge. |
| 73 | Material & labour 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate in sub base,complete all as specified and directed by Engineer-in-Charge. |
| 74 | Material & labour for Machine pressed precast concrete interlocking paver block with Grey Cement and no pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over base complete all as specified and directed by Engineer-in-Charge. |
| 75 | Material & labour sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge. |
| 76 | Material & labour for Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection/ floor finish, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints filled with Bituminous mastic asphalt complete all as specified and directed by Engineer-in-Charge. |
| 77 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engineer-in-Charge. |
| 78 | Demolition of mud phuska on roof any thickness complete all as specified and directed by Engineer-in-Charge. |
| 79 | Material & labour for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed by Engineer-in-Charge. |
| 80 | Material & labour for Cutting grooves in brick wall, 50mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge. |
| 81 | Material & labour for PCC 1:3:6, type B-0 using 12.5mm graded stone agg as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 complete all as specified and directed by Engineer-in-Charge. |
| 82 | Material & labour for Providing and laying3mm thick APP (Atactic Polyproplene Polymer) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)land on primed surface by forced application complete all as specified, Thelaying of membrane shall be gotdone through the authorised applicator of manufacturer of membrane only complete all as specified and directed by Engineer-in-Charge. |
| 83 | Material & labour forPrecast PCC plain factory made tiles,ISI marked, 20- 22 mm thick, of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry andfabricated using grey cement & no pigments. over and including 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified and directed by Engineer-in-Charge. |
| 84 | Material & labour for PCC 1:2:4, type B-0 using 12.5mm graded stone agg as in roof curve, benching, mud stops, steps, coping and the like items slightly rounded or chamfered on the edges complete all as specified and directed by Engineer-in-Charge. |
| 85 | S&F acrylic glass shelf assembly for soapdish and appropriate space for placing other things like tooth brushes comb tooth paste etc and fixed to walls with plug and brass chromium plated screws complete all as specified and directed |
| 86 | Takingdown carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etcremoving materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of creditand making good the disturbed portion of all floor, ceiling etc all as specified and directed. |
| 87 | M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge. Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii)-Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. |
| 88 | All as per Sl item No 87.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed. |
| 89 | All as per Sl item No 87.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed. |
| 90 | All as per item No. 87.00 herein beforebut 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 1.5 Sqmm PVC insulated and unsheathed FRLSHcopperearth wire for switch socket combination 3 pin 15 amps on independent board. |
| 91 | S & F Modularswitch1 way, 6 Amps, 1 module, 230 volts complete all as specified. |
| 92 | S & FModularswitch1 way, 16 Amps, 1 module, 230 volts complete all as specified. |
| 93 | S & FModular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified. |
| 94 | S & FModularsocket 5 pin 6 &16 Amps, combination type2 module complete all as specified. |
| 95 | S & FModular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified. |
| 96 | S&F ceiling rose surface bakelite surface 65 x 50mm3 terminals all as specified & directed |
| 97 | S & FLamp holder including LED bulb 12 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge. |
| 98 | S & FNew generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07,with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. |
| 99 | S & FSub main wiring (with approved colour coding as per IS)with two run of single core FRLSH PVC insulated flexible multistranded copper conductor1.1 KV grade (main cable : number of runs indicated below) along with one run of single core FRLSH PVC insulated flexible multistranded copper conductor 1.1 KV grade for earthing in and including PVC conduits of suitable size, for 2 runs of 6 sq. mm main cable + 1 run of 6 Sq. mm earth cable as in replacement of old unserviceable wiring complete all as specified and directed. Note:(i) Two different color wires shall be used for phase andneutral . (ii)Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Cutting chasing shall be included in this item. (iv) Cost of PVC conduit of suitable size is included in the unit rate quoted by contractor |
| 100 | S & FSub main wiring (with approved colour coding as per IS)with two run of single core FRLSH PVC insulated flexible multistranded copper conductor1.1 KV grade (main cable : number of runs indicated below) along with one run of single core FRLSH PVC insulated flexible multistranded copper conductor 1.1 KV grade for earthing in and including New PVC conduits of suitable size , for 2 runs of 4 sq. mm main cable + 1 run of 4.0 Sq. mm earth cable as in replacement of old unserviceable wiring complete all as specified and directed. Note:(i) Two different color wires shall be used for phase andneutral . (ii)Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii)Cutting chasing shall be included in this item. (iv) Cost of PVC conduit of suitable size is included in the unit rate quoted by contractor |
| 101 | S & FMCCB, 4 pole 125 Amps, 415 volts, 16 Ka complete fixed as in repair all as specified and directed. (Note: MCCB should be B or C curve as directed by engineer in charge) |
| 102 | Supply and fix in replacement of epoxy power coated MCCBdistribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimblesused for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(iii) connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size. |
| 103 | S & FSheet metal enclosure 8 ways double door for DBs when MCBs areto be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link allflush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed byEngr-in-charge. |
| 104 | S & FSheet metal enclosure 4 ways double door for DBs when MCBs areto be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link allflush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed byEngr-in-charge. |
| 105 | S & FMCB , SPN B curve, 240 Volts ,32-40 amp for fixing in DBs ofincluding proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 106 | S & FMCB, single pole B curve 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 107 | M & L for Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification . |
| 108 | Supply and fix Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in squareLED Batten 6500Kof capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. |
| 109 | Supply and fix Exhaust fan AC single phase 230/240 v of size 450 mm sweep 1400 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver making holes for exhaust fan 450 mm sweep, grouting nut-bolts and make surface good complete all as specified and directedby Engineer-in-Charge. |
| 110 | S & FXLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core supplied& laid in replacement complete all as specified& directedby Engineer-in-Charge. |
| 111 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. |
| 112 | Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil. |
| 113 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding1.5 mtr above the starting point. |
| 114 | Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm abovewith dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming completed all as specified and directed. |
| 115 | Supplying & laying factory made unreinforced Precast concrete cable coversclass LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables completeall as directed by Engr-in-Charge |
| 116 | Material and labour for replacement of GI tubing light grade 40 mm borefor passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. |
| 117 | Taking down and refixing of ceiling fan after necessary cleaning, painting and replacement of capacitor and capacitor stand making serial No complete all as specified and directed by Enginner-in-charge. Note:- Cost of supply & fixing of celing fan box round cover plate is included in the unit rate quoted by contractor. |
| 118 | M & L for Taking DownSolar Water Heating System including4 Nos solar Plates, 1 Nos Solar Tank ( 200 Ltr) ,1 Nos PVC Tank, angle iron stands, Connected copper pipes, GI Pipes, PVC hose pipes, nuts bolts, washers, GI Nipple, union socket, flanges and screws at building No P-01 (42 med) and all connected items and depositing safely to AGE E/M Store yard. |
| 119 | Reassembling, refixing tohot water storage tank of solar water heater of 200 Ltrlitre capacity made of stainless steel (IA SI-304) 1.6 mm thick and testing of Solar Water Heating System ( 4 Nos solar Plates, 1 Nos Solar Tank ( 200 Ltr) ,1 Nos PVC Tank) including replacement of unserviceable parts (PVC Hose Pipes, GI Nipple, nuts bolts, washers, union socket, flanges and screws), Copper Pipe, GI Pipeincluding all fittings such as elbows union sockets etc at Building NoP-01 (42 med) wherever required at the discretion of the Engr-in- Charge shall be carried out by the contractor for efficient functioning of Solar Water heating System. |
| 120 | S & F Ceiling fan 1200mm sweep5 star rated energy efficent as per latest specifications having service value more than or equal to 4.5 and suspended from fan hook including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to ceiling fan complete all as specified & directed.Note:-cost of anchor bolt for hanging of ceiling fan and grouting is included in the unit rate quoted by contractor. |
| 121 | Supply and fixRecess mounted LED luminaire 36 watt suitable for grid ceiling cutout dimensions: 2x2 Ft. incl connecting with twin core copper wire from ceiling rose to fitting, Fixture size: (LxWxH) in (595x595x65) mm incl lamp and driver all as specified & directed. |
| 122 | Repair to potholes any depth, not exc 1sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) as specified and as directed by Engineer-in-Charge) |
| 123 | Scarifying or picking up gravelled macadam or bituminous macadam surface area n exceeding 400 sqm , exc 50 mm and not exceeding 100 mm in depth complete all as specified & directed. |
| 124 | M & L for Premixed bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thikness 50 mm or less) using paving bitumen binder of grade VG-30 @ and mimimum binder content of 4% by weight of total mixcomplete all as specified. |
| 125 | M & L for preparing existing black top surfaceby brushing with wire brushed for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags to remove all loose dirt etc from black top surface, Applying evenly a premix /tack coat with bituminous primer (using paving bitumen ) 5.0 Kg per ten Sqm complete all as specified and as directed. |
| 126 | Providing and laying premix Bituminous concrete 30mm consolidated thickness with 5.5% binder (paving bitumen of greade VG-30) content by weight of toal mix and crushed aggregate of grading 2 with mising of aggregates and VG-30 bitumen in electronic operated 100-120 TPH batch type hot mix plant, transporting hot mixed from HMP to work site by tippers and laying with hydrolic pavers finisher and as approved mix, rollered and compacted to required camber and gradient with 8-12 tonne smooth wheeled, vibratiotry and tendem roller, complete as per clause 507 MORTH 5th revoluation and as specified and as directed. |
| 127 | Marking strips, straight line, zebra crossing and stop line 100mm wide and not less than 2mm thick with hot applied thermoplastic road marking paint (white or yellow) buy using automatic mechanical road painting machine complete all as directed. |
| 128 | M&L for factory made rubber moulded pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in Kerb stone with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete including embedding in the ground to depths indicated and tamping ground around and also for removing any surplus spoil to a distance n. exc. 50 m complete all as specified and as directed. |
| 129 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as p[er manufacturers instructions . |
| 130 | M & L for PCC 1:2:4type B2 using 40mm graded stone aggretgate, as in base /hardstanding incl demolition etc complete all as specified and directed. |
| 131 | M & L for Machine pressed precast concrete interlocking paver block with Grey Cement andpigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over 25 mm thick sand cushioning spread & compacted over base complete all as specified. |
| 132 | Supply and fixing metal tubular delineators made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
