Tender For Repairing And Renovation Of Amguri Rammohan H.A. Primary School
Tender Value
4 Lakhs
Estimated cost
Bid Submission
09 Mar 2024
0 days left
EMD
8011
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
amguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing And Renovation Of Amguri Rammohan H.A. Primary School
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Mar-2024 | CORRIGENDUM | Date | 09-Mar-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Page No. 16, Item No. 16125mm thick brick work with 1st class bricks in cement mortar (1:4) in ground floor |
| 2 | Page No. 189, Item No. 1Plaster (to wall, floor, ceilling etc.) with sand - cement - mortar including rounding off and chamferingcorners as directed and racking out joints including throuting, noising and drip cone, scaffolding / staging where necessary (Ground Floor) (excluding cost of chipping bror concrete surface)i) With (1:4) plaster inside wall |
| 3 | ii) With (1:4) plaster outside wall |
| 4 | Page No. 114, Item No. 1Wood work in door and window frame fitted and fixed in position complete, including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron butt hinges and M.S. Clamps (the quantum should be corrected upto thre decimals)d) Sal : Local |
| 5 | Page No. 117, Item No. 1Panel shutters of door and window as per design (each panel consisting of single plank without joint) including fitting and fixing the same in position but excluding the cost of hinge and other fitting.In ground floor (in case of non - supply of single plank, panel rate of reduction of 20 % will be made)ii) 40 mm thick shutters with 19 mm thick panel of size 30 to 45 Cm.b) Sishu, Gamar, Champ, Badam, Bhola, Mogha, Hallak. |
| 6 | P - 140 ITEM 5Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark(vii) 100 mm. X 58 mm. X 1.90 mm. |
| 7 | P - 141 ITEM 7Iron catch hook of approved quality fitted and fixed to shutter and chowkat(c) 10 mm dia x 300 mm long |
| 8 | P-162,ITEM 07(a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality etc.New Area |
| 9 | P - 200 ITEM 02(a) Painting with best quality synthetic enamel paint of approved make and brand etc -(a) On timber or plastered surface with super gloss (hi - gloss)(iii) One coat (with any shade except white) |
| 10 | Two Coat : |
| 11 | P - 194 ITEM 1White washing incuding cleaning and smoothening surface thoroughly. (c) Two coats |
| 12 | Page No. 194, Item No. 3Colour washing with \"ELLA\" with a coat of white wash priming including cleaning and smoothening surface thoroughlyi) Internal (all floors)b) Two coats |
| 13 | Page No. 198, Item No. 1Scraping of moss, blisters etc. Thoroughly from exterior surface of walls necessiatating the use of soraper, wire brush etc. (Payment against this item will be made only when this has been done on specific direction of the engineer - in - charge.(Details in M.B) |
| 14 | Page No. 198, Item No. 4Removing old scales, blisters etc. Of interior surface of walls, ceilling by scraping etc. And preparing smooth and even surface with rendering or cement morter (1:2) (as necessary) to make the surface suitable for receiving distemper (Payment against this item will be made only when this has been done on the specific direction of the engineer - in - charge.(Details in M.B) |
| 15 | Page No. 174, Item No. 7 (b)Partition with soft insulation with soft insulation board (of 12 mm thick) as per design fitted and fixedcomplete (excluding the supporting frame work) but including necessary wood battens of size 40mm X 25mma) Local Sal |
| 16 | Page No. 104, Item No. 13M.S. Or W.I. Ornamental grill of approved design joints continuously welded with M.S., W.I. Flats and bars of windows; railing etc. Fitted and fixed with necessary screws etc complete as directed. Grill weighing above 10kg and upto 16 kgIn ground floor |
| 17 | Supplying , fitting, fixing, 1 H.P. Kirlosker Pump, Payment should be made on as per Quetation of rate with eletricity point.(Payment to be made as per voucher) |
| 18 | Page No. 37, Item No. 06Suppllying PVc water storage tank of approved quality with closed top with lid (Black)- Multi layera) 500 litre |
| 19 | Page No. 13, Item No. 19(ii)Supplying, fitting, and fixing PVC pipes for underground work of Approved make off schedule 80 medium Dutty confirming ASTMD-1785 and threaded to match with G.I pipes as per IS 1239(Part I) with all necessary accessories special Viz Socket, bend T Union, cross l-bow nipple long srew reducing socket reducing T short pcs etc fitting including cost of all materials jointing materials cutting pipes making threads cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect (Payement will be made on the centre line measurement of the total pipe line including all specials no separate payment will be made for accessories, specials.)32 mm |
| 20 | Page No. 6, Item No. 7f(ii)Polythene bib cock/ stop cock with plastic inlet (EMCO/ATLAS or Equivalent 15 mm)15 mm |
| 21 | Page No. 105, Item No. 16M.S gate of jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round/Square bars or angles. M.S sheet (not less than 14 gauge) gussets, cleats etc including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in-charge In Ground floor(Portion of locking arrangement inside the wall to be paid separately |
| 22 | Page No.100,Item No.2M.S. Structural works in roof trusses with tubular sections conforming to IS : 806 - 1968 & IS : 1161 - 1998 connected to one another with bracket, gusset cleats as per design, direction of engineer - in - charge complete including cutting to requisite size, fabrication with necessary metal are welding conforming to IS : 816 - 1969 & IS : 9595 using electrodes of approved make and brand conforming to IS : 814 - 2004, haulage hoisting and erection all complete.The rate include the cost of rolled steel section, consumables such as electrodes, gas and hire charges of all tools and plants and labour required for the work including all incidental charges such as electricity charges, labour insurance charges etc. i) For trusses spanning upto 12.00m |
| 23 | Page No. 81, Item No. 9Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm dia J or L hook - bolts, limpet and bitumen washers and putty complete with 150 mm. End lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (GCI sheet to be supplied by contractor)i) In roofc) with 0.60 mm thick sheet |
| 24 | Page No. 26, Item No. 10Ordinary Cement concrete (mix 1:1.5:3) witth graded stone chips( 20 mm normal size) excluding shuttering and re-inforcement if any, in ground floor as per relevent IS codesRiver bazree |
| 25 | Page No. 48, Item No. 6Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (As necessary) and marble dust in proportion(1:2) incliding smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slury before flooring works using cement @1.75 Kg/Sq.M all complete including all materials and labour In ground floor3 mm thick topping (High polishing grinding on this item is not permitted with ordinary cement(ii) 25 mm thick |
| 26 | Page No. 135, Item No. 1Wood work in posts, post plates, raffers, battens, truns members, purlins etc. Fitted and fixed complete (excluding the cost of bolts, paints but including the cost of nails, screws etc.)ii) Sal : Local |
| 27 | Page No. 81,Item No. 10Galvanised Iron Sheet ridging fitted with necessary bolts, screws,washers e tc complete.(225mm end lapping)(A) 300mm Lapping each way(a) with 0.60 mm Sheet |
| 28 | Page No. 97, Item No. 18Fitting and fixing old pieces of adbestos, G.C.I or C.I sheets or plain sheets including cloring old holes with washers and sheet bolts and nuts etc. And including fixing the same to supporting frame with necessary hooks - bolts, washers, putty etc. (excluding cost of sheets) (payment to be made on area of finished work).ii) wilh all new fittings including the cost thereof(a) in roof |
| 29 | GST 18% |
| 30 | LW CESS 1% |
| 31 | CONTINGENCY 3% |
AI Tender Summary
Tender Timeline
Mar 07, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 09, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 09, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 11, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender