|
| 1 | Supply Part of 11 KV HT line Chambapatn |
| 2 | 11KV HT LINE : AAAC 7/4.26 mm (100mm²) conductor{Includes 3 conductor lengths for 3F and additional 1% (Sag, Jumpering and wastage} |
| 3 | 11Mtr. Long ISI marked, Swaged Steel Tubular poles as per IS:2713/1980 (Part-I-III) as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-56. |
| 4 | RCC Muff 2000mm Long withconcrete filling material |
| 5 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/c tolerance of 100 mm either side) (1Nos. / Structure] |
| 6 | MS Angle Iron Knee Bracing Set size (50x50x6 mm), Length (750mm. (2 Nos./ Structure) |
| 7 | Pole Top Bracket made of (M.S. C.I. 100x50X6mm)100mm |
| 8 | Half clamps made of MS Flat size 50x6mm for X-Bracing Set (4Nos per Set) . |
| 9 | 11 kV Pin Insulators (Porcelain 12 kV, 5 KN) with GI Pin (3Nos. Per Pole Structure) |
| 10 | H.T. Stay Set complete with hellically fitting i/c Egg insulator, Guy assembly etc. |
| 11 | Stay wire 7/3.15 [email protected] kG per stay set |
| 12 | Stay Clamp / Full Clamp made of M.S. Flat of size (50 x 6mm). |
| 13 | HT Pipe Earthing Set complete in all respect. |
| 14 | GI Wire 8SWG : for Continous Earth wire {alongwith 1 wire lengths for avg.one road crossing @ 20 m and Additional 1% (Sag and wastage)}including Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 Mtr spacing] at road crossings {0.102 kg/m} |
| 15 | MSAI.X-Arm of Size (2800x50x50x6 mm)for Guarding angle on single Pole |
| 16 | Danger Plate (250X200X1.6 mm) |
| 17 | M.S.Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm² or more (with flat and spring washers)] |
| 18 | Red oxide |
| 19 | Aluminium Paint |
| 20 | Erection of 11 kV HT line Chambapatan |
| 21 | ERECTION OF 11KV HT LINE :Erection of Single Pole Run through Structure with Steel Tubular Pole 11Mtr Long as per latest standard practices /specification of REC / HPSEBL : (including Digging of pit for poles, muffing of pole, drilling of holes in poles and X-arms ,fixing of insulators,X-arms, erection of poles, fixing of barbed wire,danger plate,filling of pit ramming and painting painting of structure with Redoxide Primer & then with Aluminium Paintetc.Complete in all respect. |
| 22 | Transporatation Chargesand manual carriage of HT linealong with all allied material from Road Side to Site of work.( avg lead :- 0.2) |
| 23 | Erection of Stay Set (HT) as per latest standard practices /specification of REC / HPSEBL including Digging of pit (size0.9x0.7x1 .5 M),fixing of Stay Rod, filling and ramming of pit, nozzelling and tightening etc. complete in all respect. |
| 24 | Erection of HT Earthing Set as per latest standard practices /specification of REC / HPSEBLincluding digging of pit of size 1.80x 1.2 x1.2 Mtrs, fixing of HT Earth Set, refilling the same andprov. earthing connectioncomplete in all respect. |
| 25 | Laying of Conductor, Stringing, Sagging ofAAAC, 100mm² /7/4.26mm² and binding with Insulators (3 wires) and fixing of jumper. |
| 26 | Laying ofEarth wire with GI Wire 8SWG , Stringing, Sagging ofand binding with Insulators. |
| 27 | Erection Charges of fixing of Jumpers of 11Kv line as per latest standard practices /specification of REC / HPSEBL (Per Nos.). |
| 28 | Dismentalling Chargesof 11 kV Line Conductor with GI complete in all respect |
