Rajasthan State Warehousing Corporation-RSWC has published Tender For Renovation And Repair Work, Construction Of C.C.Road, Repair Of Godown, Electrification , Water Supply And Sanitary Work, Gate And Boundary Wall, Conversion Of Valleygutter At Rajasthan State Handloom Corporation Godown/Processing Unit. Submission Date for this Tender is 14-03-2024. Road Work Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Renovation and Repair work |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish uptoadistanceof50m outsidetheperiphery ofthe area cleared. Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 3 | Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and liftupto1.5Mtr.disposedsoiltobelevelledandneatly dressed : All kinds of soil |
| 4 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. |
| 5 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal ofunserviceablematerialwithin50metresleadasper direction of Engineer-in-charge:In cement mortar. |
| 6 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead:Of area exceeding 3 square meter. |
| 7 | Dismantling roofing including ridges, hips, valleys and raftersetc.andstacking thewithin 50 meter lead of:Asbestos Sheet |
| 8 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 9 | Renewing glass panes,with putty and nails wherever necessaryFloat glass panes of thickness 5 mm |
| 10 | Grinding of existing floor with120 and360 No. Carborundum stoneincluding cost of wax polishing complete : |
| 11 | Providing and fixing double scaffolding system on the exterior side, upto five story made with 4" wooden member 1.5 m c/c horizontaland verticaldirection joining with rassi, clamps, challies.Thescaffoldingsystemshallbestiffenedwith bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding. |
| 12 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete |
| 13 | Refebrication work with existingsteel work including cutting, welding & refebrication as per requirement with fixing at site complete as per direction of Engineer In charge |
| 14 | Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :- (i)Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. (ii) Applying Epoxy primer on the exposed steel bars. (iii) ApplyingEpoxyhardenerandresinmix(asper manufectured"s specification) on concrete and steel bars with brush. (iv) Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. (v) Plastering the surfacewith cementsand mortar1 :3 upto depth of 30mm complete. (vi) Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. |
| 15 | Mechanised cleaning of storage tanks comprises of following 6 stage as mentioned below : (i)Mechanical dewatering (ii) Desaltingremovalofleftoverdirtywaterandsludgewith sludge pump (iii)Cleaning of wall, ceiling and floor by high pressure water jet with help of equipments which creates a pressure of 100-150 bar (iv) Removalofremaingsludgefromfloorwiththehelpof industrial vacum cleaner. Spraying of non toxic, bio degradable ecofriendly and bacterialagentcertifiedbyagovtapprovedlaboraryto disinfectthetankfromallharmfullpathogens.Thedose should be safe as per the UECD guidelines & 23 adopted on 17 th december 2001.(v)Treatmentofinsidetank by exposing UV radiation to killfurther suspended or floating bacteria if any Above 1000 ltr. |
| 16 | CARRIAGE OF MATERIALS for upto 30 KM |
| 17 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 18 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. |
| 19 | Providing and fixing up to floor five level pre cast cement concrete string or lacing courses, copings, bed plates, anchor blocks, windows sills, shelves, louvers steps, staircases, etc. including carriage, hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surface, including all T & P, curing etc. complete:M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). |
| 20 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding:New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 22 | Painting exterior surface ofWallwith 100% acrylic exterior paintofapprovedbrandandmanufacturetogiveaneven shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provisionNew Work |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:Newwork(twoormorecoats)overandincludingscrappingandprimingcoatwithcement primer. |
| 24 | Applying priming coat :With ready mixed red oxide zinc chromate primer of approvedbrand and manufacture on steel galvanised iron/steel works |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Twoor more coats on New Work |
| 26 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 27 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). |
| 28 | Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion) |
| 29 | Supplying chemical emulsionin sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20% |
| 30 | Patch repair to cement concrete floor including digging out old floorinregularshapeandremovalofrubbishcuringetc. complete in all respects. |
| 31 | C.C.Road |
| 32 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size). |
| 33 | Construction ofun-reinforced,doweljointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per 602.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a xonxrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to btidge/culvert and construction joints, admixtures as approved curing of concrete slabs for 14-days, using curing compound and water finishing to lines and grade as per drawing and MoRTH Specifitcation Clause 602 including vaccum dewatering process with all required equipments. |
| 34 | Repair of Godown |
| 35 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 36 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metresExtra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereofbeyond 5 metres.Extra for making of structural steel work required to be re-erected. |
| 37 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller, or stone or steel rammers androlling every 3rd and top- most layer with power roller of minimum 8-10 tonne capacity and dressing up in embankment for roads, flood banks marginal banks and guide banks or filling up ground depressions, lead up to 50 Mtr. and lift up to 1.5 Mtr.: All kinds of soil |
| 38 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size). |
| 39 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). |
| 40 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Windows side hung /Ventilators top or centre hung (openable) |
| 41 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 42 | Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs gradeNo. 2 and M.S. top cover1.25mm thick for rollingshuttersasperdesign&IS6248-1979.(Clear openable area to be measured for payment). |
| 43 | Providing & fixing ball bearing for rolling shutters |
| 44 | Extra forprovidingmechanicaldevicechainandcrank operation for operating rolling shutters.Exceeding 16.80 Sqm in the area. |
| 45 | Gate & Boundary Wall |
| 46 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar. |
| 47 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 48 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve1:5:10 (1Cement :5 Course Sand :10 Graded stone aggregate 40 mm nominal size |
| 49 | Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix |
| 50 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for :Walls (any thickness) including attached pilasters,buttressesplinthandstring course. |
| 51 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for :Columns, pillars, posts and struts etc. |
| 52 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ("Original producers" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Hot rolled deformed bars (IS : 1139). |
| 53 | Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 54 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 55 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. |
| 56 | 120cm. high fencing with angle iron posts 50x50x6mm. placed at every 3 Mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner & every tenth posts to be strutted with 50x50x6mm angle iron provided with four horizontallinesandtwodiagonalsofblackbarbedwire between two posts fitted and fixed with G.I. staple including earth work in excavation etc. complete. |
| 57 | Extra for using galvanized barbed wire instead of black barbed wire. |
| 58 | Conversion of Valleygutter |
| 59 | Dismantlingroofingincludingridges,hips,valleysandraftersetc.andstackingthewithin 50 meter lead of: Asbestos Sheet. |
| 60 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. |
| 61 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. |
| 62 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 63 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 64 | Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete 1.60mm thick with zinc coating not less than 350gm/m² |
| 65 | Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm shets be casted with regular modified plyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and foe a minimum up to 12mts with all scaffolding. Add extra for 0.60mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel sheet in place of 0.50mm thick |
| 66 | Renovation of Toilet |
| 67 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge 1: 3: 6 or richer mix. |
| 68 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead:Of area exceeding 3 square meter |
| 69 | Dismantling tile work in floors and roofs laid in cement mortarincludingstackingofserviceablematerial and disposal ofunserviceable material within 50 meter lead: For thickness of tiles 10mm to 25mm |
| 70 | DismantlingCIorasbestosrainwaterpipewithfitting andclamps including stacking within 50 meter lead:100mm dia pipe. |
| 71 | DismantlingGIpipes(externalwork)includingexcavation and refilling trenches after taking out the pipes and including stacking of pipes within 50 meter lead: 15mm to 40mm nominal bore |
| 72 | DismantlingCIpipes includingexcavation andrefilling trenchesaftertakingoutthepipes,breakingleadcaulked joints,meltingofleadandmakingintoblock, includingstacking of pipes lead at site within 50 meter, of dia:Up to 150mm dia |
| 73 | Dismantlingoldplasterorskirting,rakingoutjointsand cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 74 | Making of hole (width up to 150 mm) in R.C.C. slab/wall/beams by power driven drilling machine complete as per direction of EI upto 150mm thick |
| 75 | Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap. |
| 76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot &coldwatersupplyincludingallCPVCplain&brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20mm nominal size |
| 77 | 20mm nominal size |
| 78 | 25mm nominal size |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot &coldwatersupplyincludingallCPVCplain&brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 80 | 20mm nominal size |
| 81 | 25mm nominal size |
| 82 | 32mm nominal size |
| 83 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 84 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 85 | Construction of chamber in all type of soil with 230 mm thick brick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 40mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -do- size 450 x 450mm depth upto0.5 M,Cement concrete cover with frame. |
| 86 | Construction of chamber in all type of soil with 230 mm thick brick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 40mm thick M-15 grade C.C. flooring, earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. -do- size 450 x 450mm depth upto0.5 M,Cement concrete cover with frame.Inside size 300 X 300 mm depth upto 0.5 M,Cement concrete cover with frame. |
| 87 | P & F Europeantypewhite glazed vitreous china 1stquality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor Wall Mounting (syphonic) |
| 88 | P & F water closet Seat Covers with brass hinges completeSolid PVC (IS 2548 marked) grade-I Black for EWCColoured. |
| 89 | P&F C.P. lugs for toilet seat cover. |
| 90 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
| 91 | P&FWVCWashbasin(IstqualityIS:2556Mark)of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 630 mm x 500 mm dia for counter top |
| 92 | P&FBibCock(IS:8931Mark),Superiorqualityof approved make:C.P. Brass bib cock,15mm nominal boreLong nose, 15mm nominal bore weight not less than 810 gm |
| 93 | P & F Stop Cock(IS :8931 Mark),superior quality & of approved make:C.P. Brass 15mm nominal boreConcealed Stop Cock 15mm |
| 94 | P&F Full way valve (IS:778 Mark) or wheel valve of approved make. ) Gun metal 15 mm nominal bore. |
| 95 | P&F Full way valve (IS:778 Mark) or wheel valve of approved make. )Gun metal 25 mm nominal bore. |
| 96 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 75 mm dia |
| 97 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 98 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC)SWRPipesTypeBforscilandwastedischarge system (IS:13592 : 1992 Marked) of approved quality /make 75 mm dia |
| 99 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC)SWRPipesTypeBforscilandwastedischarge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia |
| 100 | ProvidingandFixingUnplasticizedPolyVinylChloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Single Tee with Door 110mm dia |
| 101 | ProvidingandFixingUnplasticizedPolyVinylChloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Multi floor trap 110 mm dia |
| 102 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Bend 87.5 75 mm dia. |
| 103 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Door Bend Left & Right110 mm dia. |
| 104 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm diaG.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc completeFlat Back (large) or half stall size 610x400x80mm |
| 105 | P&FC.P.brassUrinalFlushPipeset complete with flanged brackets of approved make.For 3 Urinals |
| 106 | P&FC.P.brassUrinalFlushPipeset complete with flanged brackets of approved makeFor 1 Urinal |
| 107 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South (Red/Cholate Colour) Up to 1500 to 3600 Cm2 Tiles |
| 108 | P&F Looking Mirror 5mm thick of approved make with ornamental frame size 50x12 with 6mm Ply Board on Back Side Complete as per approved sample |
| 109 | P & F Toilet Paper Holderwith rod of approved quality/make: C.P. brass heavy & Superior quality. |
| 110 | P&FLiquidSoapContainerwithbracketscompleteof approved make: C.P. brass |
| 111 | Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge |
| 112 | Swan neck pillar cock 15 mm nominal size |
| 113 | Two way Bib Cock 15 mm nominal size |
| 114 | Singleleverwashbasinmixerwith450mmlongcopper connection pipe |
| 115 | Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe |
| 116 | 600 mm long towel rail |
| 117 | Revolving type towel ring |
| 118 | Soap dish |
| 119 | 190 mm rain shower |
| 120 | Paper holder |
| 121 | Jet Spray(Premium heavy Quality) as approved by Engineer- in-Charge |
| 122 | Providing & Fixing chair for wall hung W.C. |
| 123 | Providing&FixingPremiumqualityBottletrapinternal portion 32mm, size 250mm long wall connection pipe & wall flangeas per approved by Engineer in Charge. |
| 124 | Supply of Hydraulic Seat Cover for Europeon WC of superior quality approved make in white Colour |
| 125 | Providing & Fixing Concealed cistern with Floor mounting frame and flush plate of superior quality and approved sample by Engineer-in-charge. |
| 126 | Providing and fixing of uPVC casement fixed windows or ventilators manufacturedinISO9001:2000&14001:2004certifiedcompany. Frame : Made from the Extruded uPVC Window Profile Section of size 60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of cumulated water, if any, to outer side. Fix Mullion made of 76 x 60mm uPVC Profile Section with steel reinforcement shall be provided in windows as per the requirement. Frame shall have „O? type EPDM gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Glazing bead of size 34 x 20mm with „K? & „O? type inner and outer EPDM weather seal gaskets alongwith 5mm thick ISI makeplainfloatglass.Allwelding jointsofframeand shutter shall be cleaned and milled with the CNC mechanism to provide uniform grooved finish on all visible joints. Hardware : Installation at Site : Complete window is to be installed on site with 10 x 100mm fastners with white cap in existing pre-finished wall cut-out cemented to glass level plane at all height & width and silicon glue is applied to fill up the crevices between wall and window frame. Complete in all respect as per the drawing and specifications and direction of engineer-in-charge. |
| 127 | Providing and fixing external grade board solid core single leafflushdoorshuttersISI2202-67markedusingPhenol formaldehyderesinin glue both sideswith approved steel fittings complete as per annexure "A" : 30 mm thick . Decorative teak veneer both side |
| 128 | Providing and fixing to existing door frames. 30mmthickfactorymadesolidpanelPVCdoorshutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15 mm x15mm , top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC „C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45 degreeon the inner side toform topand bottom railand 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined togetherwithsolventcementadhesive. Anadditional 5mm thick PVC strip of 20mm width is to be stuck on the interior sideofthe„C ChannelusingPVCsolventadhesiveetc. completeasperdirectionofEngineer-in-charge, manufacture?sspecification&drawing.(ForW.C.and bathroom door shutter). |
| 129 | P & F PVC Storage TankISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:500 litres capacity. |
| 130 | P & F PVC Storage TankISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:1000 litres capacity. |
| 131 | Providing and fixingaluminum workfordoors ,windows, ventilatorsandpartitionwithextrudedbuiltupstandard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered andjointedmechanicallywherever requiredincluding cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).For fixed portion Polyester Powder coating aluminum( minimum thickness of powder coating 50 micron) |
| 132 | Providing and fixingaluminum workfordoors ,windows, ventilatorsandpartitionwithextrudedbuiltupstandard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered andjointedmechanicallywherever requiredincluding cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Polyester Powder coating aluminum( minimum thickness of powder coating 50 micron) |
| 133 | Providingandfixingglazinginaluminiumdoor,window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directionsofengineer-in-charge.(Costofaluminiumsnap beading shall be paid in basicitem.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) |
| 134 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors includingcostofcuttingfloorsasrequired,embeddingin floors and cover plates with brass pivot and single piece M.S. With brass cover plate |
| 135 | Filling the gap upto 5 mm depth and 5 mm width in between aluminiumframe&adjacentRCC/Brick/Stoneworkby providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer in-charge complete. |
| 136 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 137 | Providing and fixing aluminium U shape handle of size 100mm with SS screws etc. Complete as per direction of Engineer-in-charge |
| 138 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening ofsize102mm x 99mm to aluminum window/ventwith required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. PolyesterPowdercoatingaluminum (minimumthicknessof powder coating 50 micron) |
| 139 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. |
| 140 | ElectrificationWork |
| 141 | Providing & Fixing of IP20, 2"x2" LED Surface/ Recessedmounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/externalsurge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection(Integral with light fixture). System lumen efficacy of = 120 lm/Watt ,THD < 10 % , p.f.=0.95,CRI>80 ,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work , referAnnexure "A" attached with this BSR .Recessed MountingMinimum lumen output 4200 lm |
| 142 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it"sISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector,screws,making connections,testing etc. as required. For specification of copperConductor,Phenolic Laminated sheet"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure "A" attached with this BSR |
| 143 | Short point (up to 3 mtr.) |
| 144 | Medium point (up to 6 mtr.) |
| 145 | Long point(up to 10 mtr..) |
| 146 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure "A" attached with this BSR |
| 147 | 25 mm |
| 148 | 40 mm |
| 149 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductorasperPWDspecificationforelectricalWorkswithISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization,insulationPVCtypeA/C/D, flameretardantasperIS 10810-53, better amperage rating as per IS:3961part 5,in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required.OEM Must have its own in house NABLlab setup for all testingfacilitiesforwires.Foradditionaltechnicalparameters of product / work refer Annexure "A" attached with this BSR |
| 150 | 2 x 1.5 sq.mm |
| 151 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 152 | Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) withCM/Lno.printed andmade outofunbreakable andfire retardant vergin UV Stabilized Polycarbonatewith brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,minimum width of switch toggle( PUSH PART ) should not less then 20mm, including all asper pre approved by Engineer in charge,making connections, testing etc. as required. Foradditional technical parameters ofproduct /work refer Annexure "A" attached with this BSR |
| 153 | 16 Amp. 2 Module switch With Led Indicator |
| 154 | 32 Amp. 2 Module switch With Led Indicator |
| 155 | Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approvedbyEngineerincharge,makingconnections,testingetc.as required.For additional technical parameters ofproduct /work refer Annexure "A" attached with this BSR 5 step fan regulator 2 Module 360 dgree rotating |
| 156 | Providing& Fixingof followingmodularaccessoriesas per PWD specificationforelectricalWorks, madeoutofunbreakableandfire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required.For additionaltechnicalparameters ofproduct/workreferAnnexure "A" attached with this BSR |
| 157 | Modular MCB 6 A to 32 A DP |
| 158 | Modular MCB 6 A to 32 A SP |
| 159 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminummaterial with heat dissipation fins onhousing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass coverand secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125lm/ wtand potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driverEfficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min = 4 KVinternalandmin10KVexternalinsidedrivercompartment.drivershouldbe Phaseto phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . LED Street Light fixture with Minimum lumen output 7500 lm |
| 160 | Supplying and drawing flexible / stranded bare copper conductor, PVC / XLPE insulated, overall aluminium mylar tape shielded ATC drain wire and outer PVC sheathed industrial Instrumentation (shielded)cables voltage grade 300/500 V as per BS /EN 50288-7 in existingsurface or recessed PVC/ MS conduit/casing capping/ Cable tray / Open Duct making connections, testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for cables. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work , referAnnexure "A" attached with this BSR . Un Armoured 4 core x 2.5 Sq.mm |
| 161 | Making hole in stone masonary/ RCC wall/ RCC slab with core cutter for accomodating refrigerantpipe/drainpipe/MSpipe/cablesetcof following dia 100 mm dia per running inch length |
| 162 | Providing and making wall openings in existing stone / Brick masonary partition wall complete with all requited T & P , Scafolding and providing lintel of required size andstrength, repairing ,plastering and cleaning the site debrises as required. |
| 163 | SITC of3 /4pole current limiting Moulded case circuit breaker (MCCB) madeofflameretardent&heatresistantmaterial havingfollowing current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with frontface and centralisedadjustable,tripfreemechanisum,truecontactposition indicator,line load interchangeability,designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitablefor operationupto 55 degreeand withoutderatingupto 40 degree,pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before executionAll as per pre approved by Engineer in charge. For additional technical parametersof product / work refer Annexure "A" attached with this BSR 4 pole MCCB With Thermal Magnetic release 160 Amp , 25 kA, adjustable O/L & adjustable S/C setting, |
| 164 | Providing & Fixing of ISO certified company made bus bar chamber housed insheetmetalboxasperPWDspecificationforelectricalWorks Confirming to IEC-60439/IS-8623 & IEC-60529/IS-2147 made out from 1.6 mm thick powder coated CRCA sheet,degreeof protectionIP-31,front openable bus bar made out of Copper suitable for 200 amp. Capacity, bus barfixed on porcelain/DMC insulators at approved spacingincluding making connectionsetc. as required.Appropriatetype test certificate/ OEM test report shall be submitted . All as per pre approved by Engineer in charge.Foradditionaltechnicalparametersofproducts/work ,refer Annexure "A" attached with this BSR . 300 mm long , 4 strip |
| 165 | Providing&LayingP.V.C./XLPEinsulated&P.V.C.sheathedArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure "A" attached with this BSR 35.0 Sq. mm 3.5 core |
| 166 | Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring,Compression Nut, heavy duty Copper lugs (IS 8337- 1976) duly crimped with crimping tool, PVC tapefor followingsize of PVC insulated& PVC sheathed/XLPE copper conductorcableof 1100volt gradeas required.Allas per pre approvedby Engineerin charge.For additionaltechnicalparametersof products/work , referAnnexure "A" attached with this BSR . |
| 167 | 4 x 2.5 sq.mm |
| 168 | 4 x 4.0 sq.mm |
| 169 | 4 x 35.0 sq.mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
