}

Tender For Parks And Green Spaces Development Projects For Longding, Longding-Arunachal Pradesh

Urban Development And Housing Department has published Tender For Parks And Green Spaces Development Projects For Longding. Submission Date for this Tender is 06-03-2024. Gardening Tenders in Longding Arunachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

42568964
Tender For Parks And Green Spaces Development Projects For Longding
Open Tender
Indian
Arunachal Pradesh
Longding
06-03-2024

Tender Details

Tender For Parks And Green Spaces Development Projects For Longding

Key Value

Document Fees
INR 1000 /-
EMD
INR 32000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:Parks and Green Spaces Development Projects For Longding
Sl. No. Item Description
1Parks and Green Spaces Development Projects
2Construction of 1.80 metre High boundary wall with Rcc column of 250x 250x 2300 mm over footing of Rcc 500x 500 mm M15, 1:2:4(1 cement: 2 coarse sand : 4 graded stone chips 20mm nominal and down guage) over base of concrete 1:5:10 (1 cement: 5 course sand : 10 stone chips 40 mm nominal and down guage) of size 600x 600 x600 mm at every 3000mm centre to centre duly joint with bottom and top beam of size 150 x 150 mm bteween each post with RCC 1:2:4 of same mix for the column and beam mentioned above including reinforcement Tar/TMT steel 12 mm dia, main bar 4 nos in beam and column and 6 mm dia stirrups 15 cm centre to centre. Between top & bottom the panel so created of size 2500 x 750 is to be filled with half brick masonry ( Best quality local brick) with cement mortar 1:4 (1 cement: 4 fine sand) including 0.9 m high MS grill over the top beam of the boundary wall made with MS flat, square or round bars spike headed on top by necessary nut bolts or screws etc of required pattern in fixed position duly applied with red oxide red lead paint. In addition to above all exposed surface brick masonry are to be ruled pointing with cement
3Providing and fixing of children"s play item in children park of approved brand and manufacture as per the directions of Engineer-incharge for the following
4Single chair swing
5Merry go round
6Wide Slide
7Park Bench
8Dustbin
9Plantation & Landscaping
10Plantation & Landscaping; Plantation of ree along the boundary wall and as required areas in 0.6 mm dia holes, 1.00 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure. Planting the sapling backfilling the tree trench, watering, fixing the tree ground and maintaining the plants for one year complete as per the direction of engineer in charge.
11Landscaping: American blue grass of selected type of grass including watering and maintainance of the lawn till the grass forms a thick lawn free from weeds and is fit for mowing over well ramed good quality earth bed mixed with sludge dump manure etc and maintenance of lawn for one complete year as per the direction of engineer in charge.
12Floral bed: Floral bed with selected floral plants including making of pits of required size at site, refilled with good quality of soil mixed with manure and pesticide etc, including watering and maintenance complete as per direction of engineer in charge.
13Construction of 1.00 metre wide cement concrete footpath with interlocking ceramic tiles 20mm thick of approved quality fixed on the 1.00 m wide cement concrete 10mm thick M15 ( CC 1:2:4 1 cement; 2 coarse sand, 4 stone chips) over base cement 10 mm thick of mix 1:4:8 (1 cement : 4 coarse sand : 8 aggregate of stone chips 40mm) including required earthwork 10mm deep and centering and shuttering etc complete as per the direction of engineer in charge.
14Providing and fixing of MS Gate double leap system 1.50 m wide made with 40x40x6 mm frame. Grilling on each leaf with gmm spiked headed MS Grill square or rounded along with locking arrangement, priming and painting etc complete as per direction of engineer in charge.
15Providing and Erecting 12mt High Mast Lightning system suitable to install 1 No 4x500 w M.H/S.V flood light fitting and control gear with internal power tool, weight 340 kg. Comprising of 1 section of hot dipped galvanized materials as per BSEN ISO 1461 thickness 3 mm, dia 100mm & 360 mm for top and bottom respectively, stress fitting arrangement on site with 350 mm overlap dynamic loading to withstand max wind pressure as per IS 875 part III, parameter for structural and foundation design must be taken from wind tunnel test. Lightning protection of GI single spike 800 mm at top and et at base inside compartment with double internal lock with adequate size of MCB erected on PVC board complete with base plate of 25mm thik 520 mm dia and foundation bolts having 4 nos of bolts of 24 mm dia 750 mm long (EN8 grade)
16Earth filling: Excavating supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth sides of foundation etc complete.
17Earth filling: Excavating supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth sides of foundation etc complete.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail