Tender For Estimate For Electrification Of Richhai 456384 Census Code Habbitation And Hhs Under Pvtg Scheme Electrification Of 10 No Hhs Of Richhai Habbitation Under Khaniyadhan U D/C Under O&M Dn Pichhore (72456) Estimate For Electrification Of Talapahad
Tender Value
6.45 Lakhs
Estimated cost
Bid Submission
11 Mar 2024
0 days left
EMD
13000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khaniyadhana → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate For Electrification Of Richhai 456384 Census Code Habbitation And Hhs Under Pvtg Scheme Electrification Of 10 No Hhs Of Richhai Habbitation Under Khaniyadhan U D / C Under O&M Dn Pichhore ( 72456 ) Estimate For Electrification Of Talapahadi 456393 Census Code Habbitation And Hhs Under Pvtg Scheme Electrification Of 11 No Hhs Of Talapahadi Habbitation Under Khaniyadhana U D / C Under O&M Dn Pichhore ( 76574 ) Estimate For Electrification Of Nohara 456385 Census Code Habbitation And Hhs Under Pvtg Scheme Electrification Of 08 No Hhs Of Nohara Habbitation Under Khaniyadhan U D / C Under O&M Dn Pichhore ( 76053 )
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Mar-2024 | Corrigendum for date extend | Date | 08-Mar-2024 |
| 2 | 09-Mar-2024 | Corrigendum for date extend 2 | Date | 11-Mar-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | (Rep-BGP) DTR 25 KVA11/0.4 KV BIS certified level-II |
| 2 | Labour Charge for installation (Rep-BGP) DTR 25 KVA11/0.4 KV BIS certified level-II |
| 3 | BIMETALIC CLAMP DISTRIBUTION TRANSFORMERS BUSHING |
| 4 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 5 | Transformer Belting Set 50X50X6 MM Angle with Two cross fixing channel |
| 6 | 140KG 8 mtr long PCC Pole |
| 7 | Labour Charge for digging and erection of 140KG 8 mtr long PCC Pole for |
| 8 | LT XLPE cable arial Bunch 3x25+1x16+1X25 Sq mm with aluminium alloy bare messenger wire |
| 9 | Labour Charge for stringing of LT XLPE cable arial Bunch 3x25+1x16+1X25 Sq mm with aluminium alloy bare messenger wire |
| 10 | PVC 2 Core un Armoured 2.5 SQMM Aluminium Conductor |
| 11 | Labour Charge for PVC 2 Core un Armoured 2.5 SQMM Aluminium Conductor |
| 12 | XLPE 1 core unarmoured 35 Sqmm aluminium conductor 1100 volts |
| 13 | Labour charge for XLPE 1 core unarmoured 35 Sqmm aluminium conductor 1100 volts |
| 14 | XLPE 1 core unarmoured 70 Sqmm aluminium conductor 1100 volts |
| 15 | Labour charge for XLPE 1 core unarmoured 70 Sqmm aluminium conductor 1100 volts |
| 16 | AAAC Rabbit conductor 0.05 sq.inch (55 sq.mm. Al.Eq.) (Conductor ACSR scrap) |
| 17 | Labour Charge for stringing AAAC Rabbit conductor 0.05 sq.inch (55 sq.mm. Al.Eq.) (Conductor ACSR scrap) |
| 18 | 11 KV D.O. Fuse unit Polymer type |
| 19 | Labour Charge for fixing of 11 KV D.O. Fuse unit Polymer type |
| 20 | Stay Insulator 90X65 |
| 21 | 9KV Gapless type (5KA) polymer for DTR Lightening Arrester |
| 22 | Labour charge for 9KV Gapless type (5KA) polymer for DTR Lightening Arrester |
| 23 | D.O. Mounting Channel 75x40x6 mm |
| 24 | Labour Charge for fixing ofD.O. Mounting Channel 75x40x6 mm |
| 25 | 11 KV Composit Polymer Disc insulator |
| 26 | 11 KV Strain Hardware (T&C type) fittings |
| 27 | 11 KV polymer Pin Insulator |
| 28 | ( Labour Charge)11 KV polymer Pin Insulator |
| 29 | 11 KV V Cross Arm 65x65x6 mm Angle type |
| 30 | Labour Charge for 11 KV V Cross Arm 65x65x6 mm Angle type |
| 31 | 11 KV top Clamp 65x65x6 mm Angle type |
| 32 | abour charge for 11 KV top Clamp 65x65x6 mm Angle type |
| 33 | D.C. Cross arms 8\" Center to center(100x50x6mm) channel |
| 34 | Labour Charge for fixing ofD.C. Cross arms 8\" Center to center(100x50x6mm) channel |
| 35 | Transformer mounting Channel (100x50x6 mm) |
| 36 | Labour Charge for fixing Transformer Mounting Channel (100x50x6 mm) |
| 37 | D.C. Cross arms 4\" Center to center(100x50x6mm) channel along with Disc & Hardware |
| 38 | Labour Charge for fixing ofD.C. Cross arms 4\" Center to center(100x50x6mm) channel |
| 39 | Horizontal and cross bracing 8\" center (50x50x6mm) along with Disc & Hardware |
| 40 | Labour charge for fixing of Horizontal and cross bracing 8\" center (50x50x6mm) |
| 41 | Three phase static energy meters 20-80 Amps with L.S. & amp TOD Facility with box |
| 42 | Labour charge for Three phase static energy meters 20-80 Amps with L.S. & amp TOD Facility with box |
| 43 | Single phase electronic meter with data downloading facility & amp box 5-30 Amps |
| 44 | Labour Charge for Single phase electronic meter with data downloading facility & amp box 5-30 Amps |
| 45 | Meter instalation Structure (50x50x6 mm angle Type) for Kaccha house |
| 46 | Labour Charge for Febrication & instalation of Meter Structure (50x50x6 mm angle Type) for Kaccha House |
| 47 | Concreting of (50x50x6 mm) angle meter structure for kaccha house (0.05 cmt per structure) |
| 48 | Labour Charge for Concreting of (50x50x6 mm) angle meter structure for kaccha house(0.05 cmt per structure) |
| 49 | Anti Climbing devices (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 50 | Labour Charge for fixing of Anti Climbing devices (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 51 | Stay set complete without Stay wire 16 mm (Painted) |
| 52 | Labour Charge for fixing ofStay set complete with Stay wire 16 mm (Painted) |
| 53 | Stay wire 7/3.15 MM (7/10 SWG) |
| 54 | G.I. Wires 4.0 MM (8SWG) |
| 55 | G.I. Pipe 40 mm Dia c Grade type |
| 56 | Labour charge for G.I. Pipe 40 mm Dia c Grade type |
| 57 | Bentonite compound powder |
| 58 | G.I. Strip 25x3 mm1 |
| 59 | Labour Charge for G.I. Strip 25x3 mm1 |
| 60 | Danger Board Enamelled 11 KV |
| 61 | Labour Charge forDanger Board Enamelled 11 KV |
| 62 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr. Lead of 4.0 MM G.I. Wire |
| 63 | Clamp for 140 KG PCC pole MS Flat 50x6 mm MS Flat ( 65x8 mm) |
| 64 | Back Clamp for 140 KG Pcc Pole MS Flat ( 50x6 mm) |
| 65 | Stone Block/Per cast block for base pedding(450x450x75mm) |
| 66 | Back Filling of pole with boulders |
| 67 | Concreting of stay (16 mm/12 mm) @0.2 Cmt. Per stay |
| 68 | Labour Charge for Concreting of stay (16 mm/12 mm) @0.2 Cmt. Per stay |
| 69 | Concreting of structure & amp foundation (1:3:6) |
| 70 | Labour Charge for Concreting of structure & amp foundation (1:3:6) |
| 71 | Meter cum protection box for 25 KVA DTR |
| 72 | Labour Charge for Meter cum protection box for 25 KVA DTR |
| 73 | Red oxide paint |
| 74 | Labour Charge forRed oxide paint |
| 75 | Aluminium paint |
| 76 | Labour Charge for Aluminium paint |
| 77 | M.S.Nuts and Bolts |
| 78 | Galvanized nut & Bolt with washar |
| 79 | Earthing for PCC pole 4.00 mm-8 SWG G.I. wire 0.8 KG per pole |
| 80 | jointing sleeves suitable for rabbit (55Sq.mm Al .Eq) AAAC conductor |
| 81 | Aluminium binding wire and tape |
| 82 | M.S. strain plate 65x8 mm 250 mm long |
| 83 | Labour charge for Complete jumpering of DTR |
| 84 | Miscelleaneous Charges For New Service Connection |
| 85 | PVC/Rubber Bushes |
| 86 | 3 pin 5A socket ( Two no piano type switch bulb bakelite holder with wiring & amp E) |
| 87 | Switch Board |
| 88 | Wooden Board 10\"\"x8\"\" |
| 89 | Rack Bolt/Screw |
| 90 | LED Lamp with 9 watt (Complete) |
| 91 | A.B Cable hanging clamps/ tension clamps (Galvanized) as perenclosed Drawing |
| 92 | Labour Charge for fixing of A.B Cable hanging clamps/ tension clamps (Galvanized) as per enclosed Drawing |
| 93 | SUSPENSION CLAMP FOR LT AB CABLE |
| 94 | Labour Charge for fixing ofSUSPENSION CLAMP FOR LT AB CABLE |
| 95 | Clamps for neutral for AB Cable |
| 96 | PIERCING CONNECTOR TYPE-I, 1P/3P (MAIN 16-50SQMM TAPOFF16-50SQMM |
| 97 | Labour Charge for PIERCING CONNECTOR TYPE-I, 1P/3P (MAIN 16-50SQMM TAPOFF16-50SQMM |
| 98 | PIERCING CONNECTOR TYPE-II (MAIN 16-50 SQMM TAP-OFF 16-50 SQMM) |
| 99 | Labour Charge for PIERCING CONNECTOR TYPE-II (MAIN 16-50 SQMM TAP-OFF 16-50 SQMM) |
| 100 | single Ph serv conn box (Deep drwan metal service connection Boxes) with one incmng upto 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector |
| 101 | Labour Charge for installation single Ph serv conn box (Deep drwan metal service connection Boxes) with one incmng upto 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector |
| 102 | SGST @ 9% |
| 103 | CGST @ 9% |
AI Tender Summary
Tender Timeline
Mar 09, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 08, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Mar 11, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 11, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 12, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender