Military Engineer Services-MES has published Tender For Additional/Alternator And Improvement To Living In Billets (Vistak) For Accommodating Of Agniveervayu Women At Air Force Station Hakimpet. Submission Date for this Tender is 27-03-2024. Railway Ancillaries Tenders in hakimpet Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-03-2024 |
| Sl. No. | Item Description |
| 1 | SCHEDULE "A" PART -I (B/R PORTION) :- Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 2 | M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) Laid in flooring complete all as specified and as directed. |
| 3 | M&L for non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding0.11 sqm but not exceeding0.18 sqm of approved 1st qualityin floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles complete all as specified and as directed. |
| 4 | Material and labour forfor digital coloured glazed ceramic tiles of sizes 300mm/350mm x 450 mm X 7 mm thick jointed in neat cement slurry, laid over including 10 mm thick rendering coat/backing layer in CM (1:3) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado / skirting complete all as specified and as directed. |
| 5 | Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed. |
| 6 | M&L for rendering to brick masonry or stone surfaces 15mm thick in cement mortar 1:4, mixed with WPC to be finished even andsmooth (without using extra cement complete all as specified and as directed. |
| 7 | M&L Complete removal of existing treatment on walls complete all as specified and as directed. |
| 8 | M&L for 2 coats of Oil bound distempering over a coat with alkali resistant of primer over 2mm thick wall putty withwhite or tinted on walls complete all as specified and as directed. |
| 9 | M&L Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade with two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed. |
| 10 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 11 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 12 | S&F Mild steel Hollow Square/Rectanguler sections of any size in Roof trusses (framed),rails and fastenings and heavy brackets framing including distance pieces, cleats etc complete all as specified and as directed. |
| 13 | S&F of Mild steel Hollow Square/Rectanguler sections as in main and cross beams, hip and jack rafters, hollow/solid section columns: purlins where connected to common rafters and running rails and guids for sliding doors: fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 14 | M&L pre painted glavalume aluminium zinc coating GI based plain/corrugatedsheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, roof overing/cladding to wall, fixed with self tapping screws as specified (Note :- The length of self tapping screw may vary for wooden and steel truss.Contractor to quote rate accordingly) complete all as specified and as directed. |
| 15 | M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified and as directed. |
| 16 | Dismatling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 17 | S&F false ceiling at all heights withsemi perforated 12mm thick micro tegular edged GRG (Glass Fiber Reinforced Gypsum ) fire resistant false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than2%, humidity resistance of 99%, NRC 0.5-0.75 as per IS 8225:1987, Non combustable as per BS 476 (part 4 )-1970 and light reflectance 85% min to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120 grams per sqm including both sides) comprising of main -T runners ofsize 15 x 32 mm of length 3000mm, cross -T of size 15x32 mm of length1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items ( galvanising @ 80 gms per sqm) i.e. 50mm long, 8 mm outer diameter M6dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the helpof plastic rawl plugs at 450 mm center to center and 40mm long dry wall SS screws complete all as specified and as directed. |
| 18 | M&L Machine cut kota stone slab in stairs/ flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as directed. |
| 19 | M&L Kota stone slab 20-25mm thick in skirting, dado and pillar laid over cement screed and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as directed. |
| 20 | M&L for Cutting and Polishing of old Kota stone flooring complete all as specified and as directed. |
| 21 | Material and labour for 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rounding edges,grinding and polishing complete all as specified and as directed. |
| 22 | Taking down Chowkhats or frames withshutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed. |
| 23 | Taking down Chowkhats or frames withshutters n exc 1.5 sq. meach complete all as specified and as directed |
| 24 | Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed. |
| 25 | Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2,4,or 6 raised panel design with 2mm thick Moulded Prelaminated PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 26 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed. |
| 27 | Supply and fix 150 mm size Alluminium,anodised barrel tower boltsof extruted section and fixed complete all as specified and as directed. |
| 28 | Supply and fix 125 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed. |
| 29 | S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 30 | Supply and fix Flush shutterssingle leaf/ double leaf,30mm thck solid core construction, with block board core and both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed. |
| 31 | Supply and fix 30mm thick factory made skeleton shutters, open rebated and preparedto receivegauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as directed. |
| 32 | S&F 125 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed,for flush pressed steeldoor frame complete all as specified and as directed. |
| 33 | Supply and fix 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed. |
| 34 | Supply and fix 150 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed. |
| 35 | S&F 200mmlong Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 36 | Supply and fix mild steel helical door spring rat tail rod model including roller plate complete300 mm long complete all as specified and as directed. |
| 37 | Supply and fix 140 mm longfloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 38 | Supply and fix Powder coated Aluminium window shutters, sliding type two track for fixing glass sections of aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note :- Glass will be measured and paid separately under relevant item.complete all as specified and as directed. |
| 39 | Supply and fix 4mm thick tinted sheet glass glazing any size with rubber packing where ever required complete all as specified and as directed. |
| 40 | Supply and fix Powder coated Aluminium grill any size 8 mm thick complete with frame or channel section including all necessary fittings complete all as specified and as directed. |
| 41 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 42 | S&F Powder coated Aluminium frame for doors,windows/ Louvered and partitions with one or more rebatesincluding cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as specified and as directed. |
| 43 | Supply and fix 18/19 mm thickprelaminated particle board, exterior grade, prelaminatedboth side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 44 | S&F 5.5 mm thick tinted glass n exc 0.5 sqm of superior quality fixed to aluminium partition and door each pan. complete all as specified and as directed. |
| 45 | Supply and fixin repairs 25 mm dia mild steel, chromium platedcurtain rodswith fixing brackets, stops, rollers etc.and taking down old pipe complete all as specified and as directed. |
| 46 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed. |
| 47 | Excavation in trenches not exceeding 1.5m in depth and getting out in hard/ dense soil including cutting of roots/ branches below ground level where ever required complete all as specified and as directed. |
| 48 | M&L for cement concrete in foundation,filling and mass concrete type D2 1:4:8(using 40mm graded aggregate) complete all as specified and as directed. |
| 49 | Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed. |
| 50 | M&L Providing precast cement concrete of Type B1 1:2:4 (20mm graded) set in CM 1:4 in window or door cills, lintels, bressumers, steps, quoin blocks of any section indicated, with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and as directed. |
| 51 | M&L TMT bars 10 mm dia and over ,cut to length bent to shape required incl cranking, bending, spirally hooping for columnsand binding with MS wire (annealed) not less than 0.90 mm dia wire etc complete all as specified and as directed. |
| 52 | M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 53 | S&F in repair vitreous China wash hand basin whiteflat back, size 550x400mm including all fittings complete all as specified and as directed. |
| 54 | Supply only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and as directed. |
| 55 | Supply and fix vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests includingremoving the existing onecomplete and making good all connectionsas in repairs complete all as specified and as directed. |
| 56 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed. |
| 57 | Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceablecistern complete as in repairs complete all as specified and as directed. |
| 58 | S & F 2000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and as directed. |
| 59 | S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(Minimum weight 15mm-142gms/ 20mm-210gms/25mm-455gms/40mm-690 gms) complete all as specified and as directed. |
| 60 | Taking downor down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed. |
| 61 | Taking downor down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 62 | Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 63 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and as directed. |
| 64 | Supply and fix steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 65 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe complete all as specified and as directed. |
| 66 | S&F in repair angle valves15 mmbore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionscomplete all as specified and as directed. |
| 67 | Supply and fix 15 mm bore LDPE pipe 45 cm long withbrass nuts and washers on both ends complete all as specified and as directed. |
| 68 | S&F in repair 15 mmbore fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 69 | S&F in repair 15 mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as directed. |
| 70 | S&F brass CP Shower rose with arms 75 mm size fixed to pipe complete all as specified and as directed. |
| 71 | S&F Sheet glass assembely consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long above WHB.complete all as specified and as directed. |
| 72 | S&F Brass Chromium plated Tubular towel rail, 20mmdia, D type, 60cm long between flanges complete all as specified and as directed. |
| 73 | Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and as directed. |
| 74 | S&F 32mm Dia PVC waste pipe for sinks or wash basins complete all as specified and as directed. |
| 75 | S&Fin repair Two way taps 15 mmbore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 76 | M&Lin repair 15 mm borefancy type health faucet with Stainless Steel hose complete all as specified and as directed. |
| 77 | Supply and fix Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) and fixed in repairs complete all as specified and as directed. |
| 78 | S&F Grating round 140 mm size of PTMT (Minimum weight 50gms) and fixed complete all as specified and as directed. |
| 79 | S&FPVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 80 | S&FPVC (SWR)110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 81 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 82 | S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed. |
| 83 | S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed. |
| 84 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed. |
| 85 | S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 86 | S&FPVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 87 | S&F RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users complete all as specified and as directed. |
| 88 | M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 M dia X 3.0 M effective depth complete all as specified and as directed. |
| 89 | Material & labour forMS angle iron conforming to Fe- 290(Gde E 165) as in fencing post Complete all as specified and as directed |
| 90 | Excavating in post holes in hard/dense soilnot exc. 0.50 cumand getting out, return filling and removing surplus soil to a distance not exc. 50 mtrs and making good disturbed ground Complete all as specified and as directed |
| 91 | Material & labour for PCC 1:2:4 type B2 ( using 40 mm graded aggregate) for angle iron post Complete all as specified and as directed |
| 92 | Supply ony Chain link of sizeMS galvanised fencing any size or type complete all as specified and as directed |
| 93 | Fixing onlychain link fencingincluding line wires, any mesh, size and type to any type ofstandard, rails, straining bolts etc., including provision of binding wire complete all as specified and as directed |
| 94 | Material & labour for Mild steel round bars 10 mm dia and over,cut to length, bent to required shape including cranking, hooking ends and securing with welding with 10 cm overlaping between two bar |
| 95 | Material & labour for Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) complete all as specified and as directed |
| 96 | Supply & fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15mm complete all as specified and as directed |
| 97 | S & FGalvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed(each line wire to be measured) |
| 98 | S&F Framed work as in doors of gates of angles or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete all as specified and as directed |
| 99 | Form work to sides of concrete footings plinth beams and similar work etc with rough finished surfaces complete all as specified and as directed |
| 100 | Form work to sides of pillars, posts, struts,piers columnsandsimilar work etc with rough finished surfaces complete all as specified and as directed |
| 101 | M&L for RCC 1:2:4 type B1 (Using 20mm graded aggregate) as in footing foundation beams bases of columns using 20mm graded stone aggregate complete all as specified and as directed |
| 102 | M&L for RCC 1:2:4type B1 (using 20mm graded aggregate) as incolumns, pillars,posts and strutsusing 20mm graded stone aggregate complete all as specified and as directed |
| 103 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed |
| 104 | Removing excavated material exc. 1.5 m but n.exc 5 km and depositing where directedcomplete all as specified and as directed |
| 105 | M&L forPlain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling complete all as specified and as directed |
| 106 | SCHEDULE "A" PART -II (E/M PORTION) :- Taking down carefully existing unserviceablealuminum/copperpoint wiring (light, fan, socket or power) of any description & in anyposition complete including all fittings& fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etcincluding taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed |
| 107 | M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping / PVC Conduit pipe of adequate size fixed on surface with PVC rawl plugswith sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii)Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A". (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with modular white colour cover plate with frame or with 3 mm thick laminated sheet fixed with suitable brass screws and cup washers |
| 108 | One light/buzzer point controlled by one; one way switch. |
| 109 | One fan/exhaust fan point controlled by one, one way switch |
| 110 | One 3 pin socket out let 5 amp point on the (same board) with other switches. |
| 111 | One 3 pin socket outlet 5 amp point on the independent board |
| 112 | All as per item No. 2 here-in-before butwith 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board. |
| 113 | S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specifiedanddirected. |
| 114 | S&F switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified anddirected. |
| 115 | S&F switch socket outlet five pin, 5 Amps, flush type, 230 volts AC circuit complete all as specified anddirected. |
| 116 | S&F switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit complete all as specifiedanddirected by Engr-in-charge. |
| 117 | S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt,designed box type LEDluminaries,CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with driver, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wiredand connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specifiedanddirected. |
| 118 | S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed. |
| 119 | S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED/CFL lamp fitting and including LED Bulb 15 Watt complete all as specified and directed by Engr-in-charge |
| 120 | Taking down distribution boards / main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge |
| 121 | Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge |
| 122 | S & Fsheet metal enclosure powder painted for MCB DB TPN04 way double door with IP-42 protectionwith Din rail and busbar complete all as specified and directed by accepting officer |
| 123 | Supply and fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed. |
| 124 | Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed. |
| 125 | S&F MCB single pole, 6 to 32 Ampsin `C’ series having current rating 10 KA complete all as specified and directed. |
| 126 | Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed. |
| 127 | M/L for Sub main wiring with 4 runs of PVC insulated unsheathedmulti stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulatedearth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiringand connecting up ,all as directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length. |
| 128 | M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle completeall as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’ |
| 129 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge |
| 130 | Supply and fixing post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-charge. |
| 131 | Supply and fixing of Tubes, "light grade", galvanised iron, with all fittings; laid in trenches / wall / buildings of dia 40 mm complete all as specified and directed by Engr-in-charge. |
| 132 | Supply and fixing of ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified and directed by Engr-in-charge. |
| 133 | Supply and fixing of exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-charge. |
| 134 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in-charge. |
| 135 | Supply, installation, commis-sioning of Water cooler partially stainless steel, electric driven single phase having approx storage capacity of 80 litres and nominal cooling capacity of 40 litres complete all as specified and directed by Engr-in-charge. |
| 136 | Supply and installation of desert cooler plastic body of capacity 55 litres 4000 Cum / Hr outdoor type complete all as specified and directed by Engr-in-charge. |
| 137 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 4 sq. mm nominal cross section in service connections complete all as specified and directed by Engr-in-charge. |
| 138 | Supply 18" gold life smart down rod (Anti suicide fan rod) MS pipe zinc plated, 19mm OD, 1.8+/- 0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf + and spring hidden in pipe will expand to about 1 mtr or more, white colour for ceiling fans of any size with all accessories complete all as specified and directed by Engineer-in-Charge. |
| 139 | Taking down ceiling fans of any size, any make fixed/hanged at different location in AFS Hakimpet, dismantling the fan complete cleaning and re-assembling the same including replacing anti suicide down rods, split spins flexible copper cable of size 23/0.0076 twin core, 70 cm long and refixing the ceiling fan on the same location in original position, testing and commissioning of fan for smooth running, as per entire satisfaction and complete all as specified and directed by Engineer-in-Charge. Note:- (i) Quoted rate by tenderer of any item of the schedule is inclusive of taking down the ceiling fans from the position and re-fixing/hanging in position connecting and testing complete. (ii) Anti suicide down rods replacement of spares shall be measured and paid separately under appropriate items. (iii) Old MS down rod to be deposited at AGE E/M store yard. |
| 140 | Supply and lay pipe galvanized, "Medium class", including fittings 25 mm (1.0") dia complete all as specified and directed by Engr-in-charge. |
| 141 | Supply and fix Gun metal Gate valves (brass insert) of 25 mm bore complete |
| 142 | Taking Down Old Unserviceable XLPE UG complete including all accessories complete all as specified and as directed by Engr-in-charge. |
| 143 | Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 16 sqmm 4 core complete all as specified and directed |
| 144 | Excavating in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth for foundation etc for laying of cables, erection of poles, struts/ stays etc not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and as directed |
| 145 | Returning, filling in, including spreading leveling watering and well ramming inlayers not exceeding 25 cm in any type of soil complete all as specified and as directed |
| 146 | Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils complete all as specified and as directed |
| 147 | M & L for spreading cleaned dry river sand filling in trenches for cushioning of LT / HT cables punning after filling complete as specified and as directed. Note : - Punned thickness shall only be measured and paid |
| 148 | Supply and lay un-reinforced precast concrete cable cover , class LV , Type Iflat size 250 x 150x 40 mm M-20 grade laid dry in treches over under ground cables for protection complete all as specified and as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
