Tender For Repair To Joinery In Ra Area At Cad Pulgaon
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Mar 2024
0 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pulgaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Joinery In Ra Area At Cad Pulgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of any description not exc 1.50 Sqm each all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed . |
| 3 | Taking down shutter of any descriptionnot exc1 Sqm each all as specified and directed. |
| 4 | Taking down shutter of any descriptionexc 1 Sqm and n.exc 2 sqm each all as specified and directed. |
| 5 | Taking down shutter of any descriptionexc 1 Sqm and n.exc 2 sqm each and refixing in the same opening all as specified and directed . |
| 6 | Taking down shutter of any description not exc 1 Sqm each each and refixing in the same opening all as specified and directed . |
| 7 | S&F Structural Steel work conforming to Fe-290 Gde E-165 as in framed structure for staging of water tank ,doors or gates of angle or other section with gusset plates, rails,braces, etc., complete,incl 1 mm thick mild steel, plain sheet , cut to size,drilled, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as requiredfor fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, sliding bolts and fixing complete all as specified and as directed. |
| 8 | Supply & Fixing IInd class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed . |
| 9 | Supply & Fixing 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces.The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 10 | S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 11 | Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze,divided into squares with plain chamfered mitred and rebated sash bar as in doors, sizes of members of shutters as specifiedin SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed. |
| 12 | Supply & Fixing 30 mm thick factory made glazed skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze,divided into squares with plain chamfered mitred and rebated sash baras in window/ventilator, sizes of members of shutters as specifiedin SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed . |
| 13 | S&F in repairs block boards grade 2 quality 18/19mm thick interior grade with decorative face both side, interior grade, commercial type, fixed with screw to timber frame work for cupboard shutter, shelf etc complete all as specified. |
| 14 | S&F 100 mm Hasp and stable, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screws all as specified and directed. |
| 15 | Supply & Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified & directed. |
| 16 | Supply & Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 17 | Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 complete, depth of embedded portion of hold fasts not exc half brick all as specified & directed. |
| 18 | Supply & Fixing Bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay) for large gates, hook & pintle hinges; large hasp & staples; hand made sliding bolts; clamps; hold fasts and similar articles confirming to Fe 290, Gde E 165 complete all as specified & directed. |
| 19 | Material and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in bed block to hold fast including necessary formwork complete all as specified and directed. |
| 20 | Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed. |
| 21 | S&F 100mm butt hinges, aluminium anodised of extruded section complete all as specified and as directed |
| 22 | Supply & Fixing 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 23 | Supply & Fixing in repairs 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 24 | Supply & Fixing 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 25 | Supply & Fixing in repairs 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 26 | Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 27 | Supply & Fixing in repairs 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 28 | Supply & Fixing 125 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 29 | Supply & Fixing in repairs 125 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 30 | Supply & Fixing 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed. |
| 31 | Supply & Fixing 300 mm in repairs aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed. |
| 32 | Material and labourfor applying two coats of synthetic enamel paint over one coat of pink primer including preparation of wood or wood based new surfacearea exc 10 cm width or girth complete all as specified and directed. |
| 33 | Material and labourfor applying one coat of synthetic enamel paintincluding preparation of wood or wood based old surface area exc 10 cm width or girth complete all as specified and directed. |
| 34 | Supply & Fixing stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or beading complete all as specified and directed . |
| 35 | Supply & Fixing in repairs stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks , beadingalso with stainless steel wire staples for fixing on wooden/ steel windows/ventilators and doors complete all as specified and directed . |
| 36 | S&F in repairs of 3 mm thick plain sheet glass, ordinary qualityand glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane incl hacking out old broken glass, cleaning rebates in preparation for reglazing carefully, taking out beads, removing any serviceable glass to store and rubbish off the premisescomplete all as specified and directed. |
| 37 | Supply & Fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beading, area not exc 0.5 Sqm in each panecomplete all as specified and directed . |
| 38 | Supply & Fixing 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with beading, area not exc 0.5 Sqm in each panecomplete all as specified and directed . |
| 39 | Supply & Fixing mild steel300mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed . |
| 40 | Supply & Fixingsteel windows Z section with side hung shutters including projecting type/box type hinges with steel handle and steel peg stay, complete with glazing bars, guard bars,dovetailed or welded complete all as specified and directed. |
| 41 | Supply & Fixing for Steel ventilator Z sectionwith top hung shutter including hinges, steel peg stay, completeall as specified and directed. |
| 42 | M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide complete all as specified and directed. |
| 43 | M&L preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 44 | S&Ffor powder coated,aluminium frame work in partition/doors/windows with shutter all a round and including aluminum beading, glazing cleats fixed in frames, Neoprene rubber beading/packing incl 150mm handle, 200mm tower bolt etc. complete all as specified and directed. |
| 45 | S&Fdecorative aluminium grill,weight not less than 3.13 kg/sqm (with frame of size 20 x 20mm aluminium cleat screwed to main frame) and fixed to wall/window/ventilator with screws complete all as specified and as directed. |
| 46 | Supply & Fixing 5 mm thick figured glass, pin head type and glazing with oil putty in squreandfixed inside aluminium frame exc 0.5 Sqm in each paneall as specified and directed. |
| 47 | Supply & Fixing 4 mm thick figured glass, pin head type and glazing with oil putty in squreandfixed inside aluminium frame n.exc 0.5 Sqm in each paneall as specified and directed. |
| 48 | Supply & Fixing 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed inside aluminium frame all as specified and directed. |
| 49 | S&F3-4 mm thick Aluminium Composite Board, both side with decorative lamination fixed inside aluminium frame all as specified and directed. |
| 50 | Supply & Fixing aluminium mortice lock 4 lever vertical type 75 mm size for aluminium door shutter complete all as specified and directed . |
| 51 | Material and labourfor double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified anddirected. |
| 52 | S&F in repairs curtain rails 25mm, mild steel, chromium plated with fixing brackets,stops, rollers etc. all as specified and directed. |
| 53 | S&F in repairs Stainless steel SS grade 304, curtain rod 25 mm dia 1.20mm thick with brackets of SS grade 304 all as specified and directed. |
| 54 | M&L forBrick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar including demoltion of brickwork or stone/ boulder masonry, built incement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and as directed. |
| 55 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water, etc. |
| 56 | Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of the brick masonry surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 57 | Material and labourfor preparation of newly plastered surfaces of walls and applying two coats of oil bound distempercomplete all as specified and directed. |
AI Tender Summary
Tender Timeline
Feb 28, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 19, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 26, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender