Himachal Pradesh State Electricity Board-HPSEB has published Tender For Tender For Water Proofing Treatment On Slab Of Battery Room At 132/33Kv Sub Station Nadaun Under Es Division, Hpsebl, Hamirpur.. Submission Date for this Tender is 05-03-2024. Water Proofing Work Tenders in nadaun Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
2 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, i/c cutting , hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
3 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete. |
4 | Providing and fixing unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. |
5 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75mm bend. |
6 | Painting with synthetic enamel paint of approved brandand manufacture to give an even shade Two or more coats on new work. |
7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
8 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour two coats. |
9 | Preparation of mother surface including removal of chipped of concrete and dust from mother surface with pressure washer to clean the surface widening of cracks and crack repair with bond and micro concrete or pu based sealant. Angle corner making or washing, bond coat on the mother surface. After bonding, one coat of primer and two coats of elastomeric waterproof liquid membrane. If surface require we use fiber mesh with coating. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail