|
| 1 | RENOVATION OF BUILDING |
| 2 | Dismantling cement concrete or brick or granolithic floor including baseconcrete and including stacking of dismantled materils as directed by the engineer charge stone flagged or tlied floor |
| 3 | Dismantling of Door & window chaukhat with chaukhat and including stacking of dismantled materils as directed by the engineer charge stone flagged or tlied floor |
| 4 | Dismantiling Existing plaster including disposal of refuse as directed by the Engineer-in charge with in a distance of 60metre (200ft) outer side |
| 5 | 12 mm cement plasterinsingle coat on rough sideofsingle orhalfbrick wall for interior plastering up to floor twolevelincludinginternalrounded angles not exceeding80mm ingirth and finshed even and smooth. (1) 1 cement : 6 coarse sand (2.25FM) |
| 6 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth. (1) 1 cement : 6 coarse sand (2.25FM) |
| 7 | M-150 brick work in 1:6 cement and coarse sand of 2.25 coarseness modulus mortar in super-structure. Above plinth level up to floor two level (up to two storey) including necessary cutting and molding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. |
| 8 | 40mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement. |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 11 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. |
| 12 | P/L 20mm white Kota stone flooring over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete. |
| 13 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 14 | Wall painting with plastic emulsion paint of approved brand and manufacture to given shade: Two or more coats on new work(Ist quality (Royal, Silk, Asian/ Berger) |
| 15 | Finishingwallswith acrylic smooth exterior paint with silicone additives of required shade @1.67ltr/10sqm. Over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm. |
| 16 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 17 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 18 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.Providing & fixing of hold fast for chaukhatsof doors and windows. |
| 19 | Angle iron door chaukhat 40*40*5 |
| 20 | MS Sheet for windows |
| 21 | Fixing of Door, windows/ventilators chaukhats in position. Door chaukhats |
| 22 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. |
| 23 | Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . |
| 24 | Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete. (a) 150 mm x 10mm |
| 25 | Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm. |
| 26 | Painting Ist coat over priming coat (butexcluding cost of priming coat) on steelandothermetalsurfacesup to 10 cm.widthorgirthorsmall articles notexceeding 0.10sqm in area white superiorsynthetic enamel such as LUXOL3,Hi-glossapcolitesuperlac,DULUX specifiedbrushingtogiveanevenshadeandincluding cleaningthe surfaceofalldirt,dust and other foreignmatter sandpaperingand stopingincluding cost ofall materials, labour toolsandplantsetc. required forpropercompletion ofthe work. |
| 27 | Same as item 31 abovebutonnew wood surface. |
| 28 | Providing & laying \"brick Coba\" 120mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work. |
| 29 | Providing and laying cement concrete 1:4:8 (1 cement :4 fine sand :8brick aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. |
| 30 | 25mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement. |
| 31 | Construction of drain alongwith apron. (150x150) mm |
| 32 | Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable asearth continuity wire and piano type switch etc. complete in all respects. |
| 33 | Same as item No.(1) but for5 Amp plug point with piano type switch and socket etc. |
| 34 | Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4.0 sqmm FR PVC insulated multistranded copper conductorcable as earth contunity wire etc. complete in all respects. |
| 35 | Supply and wiring of submain 2 number 10 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 6.0 sqmm FR PVC insulated multistranded copper conductorcable as earth contunity wire etc. complete in all respects. |
| 36 | Supply and wiring of submain 4 number 10 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit partly concealed in wall and partly laid in slab along with Two number 6 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 4 X 10sqmm |
| 37 | Supply and wiring of submain 4 number 16 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit partly concealed in wall and partly laid in slab along with Two number 6 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 4 X 16sqmm |
| 38 | Supply and Fixingrecess/ surface/pendant mounting round10 to 15Watt LED Down lighter having poweder coated die cast aluminium housing body with extended heat sink and diffuser of spcial polycabonate material and driver setcomplete inall respect. |
| 39 | Supply and erection of wall fans including providing nuts, bolts, mounting frame and other accessories including connections etc complete as required. |
| 40 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. 501 a) 25sqmm 3.5 core |
| 41 | b) 16 Sqmm 4.0 core |
| 42 | c) 10sqmm 2 core |
| 43 | S/F of 32A 415VTPN metal clad TPN HRCtype switch fuse unit complete in all respects. PWD 326 |
| 44 | S/F of 32A 240V SPN metal clad rewireabletype switch fuse unit complete in all respects. PWD 302 |
| 45 | Supply and burying of safe Earthing Electrode T-19 (Hot Dip Galvanized), Length 3000mm, outer pipe 50 mm, inner pipe 25, terminal Dia 12mm, outer GI Pipe of 16 swg and inner GI Pipe of 12 swg with Hot Dip Galvanization up to 10 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soile (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. ( From electrode terminal to switch board, cost of 25x3mm G.I. strip will be extra) Make: As approved in U.P.P.W.D., & C.P.R.I. Certified. |
| 46 | S/L 1.5Sq Mm3 corePVC insulated, flexible and stranded, unarmouredCopperconductor cable 1100V grade with PVC conduit as per required/approved make. |
| 47 | Supply & laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq.mm 4 core |
| 48 | Supply and fixing of DWC Pipe 50 sqmm as required . |
| 49 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 50 | Same as abovefor W.C. pan with ISI marked white solid plastic seat and lid |
| 51 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. |
| 52 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.32mm dia |
| 53 | Providing & fixing white vitreous china flat back halfstallUrinalof 580x380x350 mm with white PVC automatic flushing cistern with fittings standard size CP brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in CP brass including painting of fittings and brackets cutting & making good the walls & floors wherever required. Single half stall urinal with 5 liter P.V.C. automatic flushing cistern |
| 54 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 55 | Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms |
| 56 | Providing & fixing soil, waste and vent pipes. a) 100mm dia centrifugally cast iron S & S pipe. |
| 57 | b)75mm dia centrifugally cast iron S & S pipe. |
| 58 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.100mm |
| 59 | 75mm |
| 60 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. a) for 100mm dia pipe. |
| 61 | b) for 75mm dia pipe. |
| 62 | Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. a) 100mm inlet & 100 mm outlet. |
| 63 | a) 100mm inlet & 75mm outlet. a) 100mm dia. |
| 64 | Providing & fixingcast iron coller. |
| 65 | b)75mm dia. |
| 66 | Providing and fixing plaincast iron S & S sanitary bend. a) 100mm |
| 67 | b) 75mm |
| 68 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110mm diameter |
| 69 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110mm |
| 70 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. (internal work) Exposed on wall25mm dia nominal bore (medium duty) |
| 71 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.15mm dia nominal bore |
| 72 | 20mm dia nominal bore |
| 73 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.15mm dia nominal bore. |
| 74 | 20mm dia nominal bore. |
| 75 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.15mm nominal bore |
| 76 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore |
| 77 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore |
| 78 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore |
| 79 | Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats).25mm. Nominal bore |
| 80 | Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore |
| 81 | Providing and fixing brass stop cock of approved quality. 15 mm nominal bore |
| 82 | 20 mm nominal bore |
| 83 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Capacity 1000 litre |
| 84 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter. |
| 85 | Providing, laying and joining glazed stone ware pipes grade \"A\"with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 100mm diameter |
| 86 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. a) 100mm diameterS.W. Pipe |
| 87 | b) 150mm diameterS.W. Pipe |
| 88 | Providing and fixing square mouth S.W. Gully trap grade \"A\" complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm.size (inside) the weight of cover to be notless than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design. a) 150 x 100 mm. size P type |
| 89 | NEW PORCH |
| 90 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 91 | Dismnetaling of column & slab |
| 92 | Providing and laying cement concrete 1:4:8 (1 cement :4 fine sand :8brick aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. |
| 93 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Slab excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. |
| 94 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Raft excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. |
| 95 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Beam excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. |
| 96 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Column excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. |
| 97 | M-150 brick work in 1:6 in super-structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand) |
| 98 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 99 | BOUNDARY WALL |
| 100 | R.c.c. workwith cement approved coarse sandand2cm. (3/4\") guageapproved stoneballastin the proportion 1:1.5:3,(1cement :1.5 corse sand 3 grit) in Beam excludingsupply of reinforcement and its fixing and bending but including its fixing and bindingthe same necessarywith 24 BWG bindingwireand including necessary centeringand shuttering etc.and also including supply of all materials,labour andtools and plants etc, required forproper completion of the works. strength of the concrete shall not be less than M-20. |
| 101 | Fe 500 Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work(whennot includedin anover all rates )wroughttorequired shape as necessary including bending for proper completion of thework andincluding supply of steel itswastage bendhooks andauthorisedover lappingshallbe measured upto floor two level. |
| 102 | M-150 brick work in 1:6 cement and coarse sand of 2.25 coarseness modulus mortar in super-structure. Above plinth level up to floor two level (up to two storey) including necessary cutting and molding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. |
| 103 | 12 mm cement plasterinsingle coat on fair side ofsingle orhalfbrick wall forinteriorplasteringupto floortwolevel including brick wall for interior plastering uptofloortwo level including internal roundedangles chamfers, and / orroundedanglesnot exceeding80mmin girth and finished even and smooth No. extra for mixing any additive. (1)1 cement : 6Fine sand |
| 104 | Finishing wall with water proof cement paint of approved make and quality on new work with two coats to give an even shade including supply of all materials , laour ,tools and pants etc. required for proper completion of the work. |
| 105 | Supply andfixingM.S.Workin grill includingall necessary forproper completion of the work. |
| 106 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 107 | STREET LIGHT(PWD 611+1424) |
| 108 | Providing & fixing of Street Light |
| 109 | GST Extra as per Applicable |
