Tender For Constructing Grampanchayat Sachivalay Building At- Tulsani Tal -Sangameshwar
Tender Value
53.99 Lakhs
Estimated cost
Bid Submission
01 Mar 2024
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sangameshwar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Grampanchayat Sachivalay Building At- Tulsani Tal -Sangameshwar
BOQ
| Sl. No. | Item Description |
| 1 | Item No. 1 :- Excavation for foundation in hard murum including removing the excavated materials upto a distance of 50 metres beyond the building area & lift as specified, stacking & spreading as directed including dewatering unless provided elsewhere, preparing the bed for the foundation & necessary backfilling, ramming, watering complete including shoring & strutting. |
| 2 | Item No. 2 :- Excavation for foundation inH.R. by Chisellingincluding removing the excavated materials upto a distance of 50 metres beyond the building area & lift as specified, stacking & spreading as directed including dewatering unless provided els |
| 3 | Item No.3:-Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automaticmicro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand R.A.1 |
| 4 | Item No.4 :-Providing and laying in situ/Ready Mix cement concrete M-25of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandR.A.2 |
| 5 | Item No.5 :- Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to beprovided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand R.A. No.3 |
| 6 | Item No 6 :Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, ?nishing uneven and honeycombed surface with C.M. 1:3 of su?cient minimum thickness to give a smooth and even surface or roughening the surface if special ?nish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. R. |
| 7 | Item No.7:- Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to beprovided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix . quality Artificial Sand R.A. No.4 |
| 8 | Item No.8 :- Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) R.A. No.5 |
| 9 | Item No.9 :- Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja asper detailed design and drawings including centering,formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand R.A. No.6 |
| 10 | Item No.10:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 11 | Item No.11 :- Providing laterite stone masonry in C. M. 1:6 in foundation & plinth including striking joints on the unexposed faces & watering complete. |
| 12 | Item No. 12:- Filling in plinth & floors with approved excavated materials in 15 cm. to 20 cm. layers including watering & compaction complete. |
| 13 | Item No. 13 :- Providing soling using 80 mm size trap metal in layer of 15 cm each including filling voids with sand, ramming, watering etc. complete. |
| 14 | Item No. 14 :- Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering & scaffolding complete. |
| 15 | Item No 15 - Providing and fabricating structural steel work in rolled sections, fixed with connectingplates or angle cleats in main and cross beams, hip and jack rafters, purlinsconnecting to truss members and the like, as per detailed designs and drawi |
| 16 | Item No 16 -Providing and fixing Mangalore tiled roofing with class \" AA\" tiles including securing thelast course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing50 mm x 25 mm horizontal teak wood battens and iron works and |
| 17 | Item No.17:-Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and indowsincluding chamfering, rounding, rebating, iron holdfast of size300mm x 40mm x 5mm with oil painting, etc. complete. |
| 18 | Item No.18:-Providing sills of polished Kadappa stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. |
| 19 | Item No.19:-Providing and fixing solid core flush door shutter in single leaf 32mm.thick decorative type of exterior grade as per detailed drawings approved fae veneers 3mm.thick on both faces or as directed all neessary beads,mouldings and lipping,wroug |
| 20 | Item No.20:-Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/ |
| 21 | Item No. 21 :-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffoldingand curing etc.complete |
| 22 | Item No.22:-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4without neeru finish to concrete or brick surfaces, in all positions including scaffoldingand curing etc.complete |
| 23 | Item No 23 - Providing and laying vetrified mirror/ glossy finish tiles having size 590mm to 605mmx590mm to 605mm.of 8 to 10mm. Thickness and confirming to IS 15622-2006 (group Bia) of approved make shade and pattern for flooring in required position laid |
| 24 | Item No 24 - Providing and laying vetrified mirror/ glossy finish tiles having size 590mm to 605mmx590mm to 605mm.of 8 to 10mm. Thickness and confirming to IS 15622-2006 (group Bia) of approved make shade and pattern for flooring in required position laid |
| 25 | Item No 25 - Providing and fixing mild steel grill work for windows, ventilators etc. 15 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 26 | Item No.26:-Providing and applying two coats of exterior acraylic emulsion paint confirming tocorrespondingI.S. ofapprovedmanufactureandofapprovedcolour totheplastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,s |
| 27 | Item No.27:-Providingandapplyingpearl/ luster finishpaint of approvedcolour andshade to the existingplastersurfaceincludingscaffolding,preparingthesurface,applyingtheacrylic wall putti etc. complete. |
| 28 | Item No.28:-Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate ofapproved drawing with all fixtures and fittings in two leaves with strong hold fastembedded in c.c. block at top and bottom with locking arrangement including cu |
| 29 | Item No.29:-Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete |
| 30 | Item No.30:-Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 575 mm dia including P or S trap cast iron soils and vent pipe upto the out the outside face of the wall (1:5:10) cement concrete bedding 15mm thick 10liter PVC flus |
| 31 | Item No.31:-Providing and fixing white glazed earthenware Wash Hand Basin of 55 cm x 40cm size including cold water pillar tap / cold and hot water pillar tap brackets, rubber blugs and brass chain, stop tap and necessary pipe connection including P.V.C |
| 32 | Item No.32:-Providinf and fixing P.V.C.pipes of 15mm dia with fitting such as bends tees. reducers clamps etc. including necessary excavation trench filling etc. comp including removing theexisting pipe line if necessary and conveying and stacking the sa |
| 33 | Item No.33:-Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends,tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete.Including removing existing pipe line if necessary and conveying |
| 34 | Item No.34:-Providing soak pit of size 120cm x 120cm x 120cm including excavating and fillingwith brick-bats. |
| 35 | Item No.35:-Providing and fixing H.D.P. container Synted or alike one piece moulded water tack made out of high density polythyler and built corrugated inclusive of delivary up to destination hoisting and fixing of accessories such as inlet outlet overfl |
| 36 | Item No.36:-Providing and fixing Name board etc.complete |
| 37 | Item No.37 - Test report charges |
| 38 | Standard consistancy, Fineness , Specific gravity, setting Time( Initial & Final) Compresive Strength Soundness 495/1 |
| 39 | Fineness modulus (Sive Analysis) Silt & Clay Content 495/10 |
| 40 | Water absorption , specific gravity, impact value/ crushing value |
| 41 | Compressive strength( Set of 3 Cubes) |
| 42 | It.No.38. Royalty Charges |
AI Tender Summary
Tender Timeline
Feb 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 01, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 02, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender