Tender For Supply And Fixing Of Led Street Light, And 25 Mtr High Mast Light In Sector-11 (Com.) Gida Gkp.
Tender Value
1.19 Crore
Estimated cost
Bid Submission
04 Mar 2024
0 days left
EMD
7.97 Lakhs
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gorakhpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Fixing Of Led Street Light, And 25 Mtr High Mast Light In Sector-11 (Com.) Gida Gkp.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. confirming to IP 66 protection complete in all respect. ) as per uppwd seh. no. 1423 CAT-AAA Havells, Crompton, Phillips,Bajaj, surya. |
| 2 | Band G.I Pipe 2\" dia,thicknes 02mm, lenth 1mtr. |
| 3 | Clamp for G.I Band with nut & bolt. |
| 4 | Supply & fixingof 25 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out ide dip, heaving pole sheet thickess 4 mm. Top dia minium 150 mm, Bottom dia 460 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld with accessories for high mast such as head frame suitable for 8 to 12 luminarise & its control gear bcxes 1.5 HP power tool moter 3 point suspension system with steel wire rope 8 mm dia, double drum winch including making suitable foundation as per manfature drawing/ site reuiment along with foundation bolts nuts wsashers anchor plates etc completee in all respect. uppwd seh. no 654.Make. Bajaj. |
| 5 | Supply and fixing of factory wired integral LED flood light luminaires with dia cast aluminium housing built with driver set suitable for 200 Watt. Confirming to IP 66 protection complete in all respect. UPPWD She.No 1455 Make-Crompton, bajaj, Havells, Surya. |
| 6 | Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single Decorative arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect 645. make- Bajaj. |
| 7 | Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. confirming to IP 66 protection complete in all respect.as per uppwd seh. no. 1425 CAT-AAA Havells, Crompton, Phillips,Bajaj, surya. |
| 8 | Supply & fixing of 10 mtr GI Octagonal Pole ofapproved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm Decorative bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. PS- 650 make-Bajaj. |
| 9 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of the time switch TSO 100 serieswith contactors, HRC fuses, isolating switch metering instrument and instrument box with CTs etc. In case of TPN, complete in all respect. Make-uppwd Seh No. 807 (e)25 A TPN. |
| 10 | Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized) Length up to 300 mm outer ppe 76mm inner Dia 38mm terminal Dia 12 mm outer GI pipe of 16 SWG and inner GL pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductiive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing (From electrode terminal to switch board cost of 25X3 GI. Strip will be extra) uppwd seh. no 725(A). |
| 11 | S/oEarthing of pole by MS earthing Rod of (20x2500 & 6Swg Earthing wire). For 123 Nos Octagoanal poles.uppcl. CD 2021-22 A-1 |
| 12 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-In charge, complete in all connected with the earth conductor by clamps etc. Sr No. 501.(a)-06 sq. mm 2 core |
| 13 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-In charge, complete in all connected with the earth conductor by clamps etc. Sr No. 501.(k)-35 Sq mm 3-1/2 makepolycab, Gloster, KEI ,Havelles, 50x8 mtr. |
| 14 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-In charge, complete in all connected with the earth conductor by clamps etc. Sr No. 501.(i) 16 Sq mm 04 core |
| 15 | S& F of 100 Amp 415 V metal clad TP HRC type switch fuse unit complet with HRC fuse on angle iron bracket complete in all Respect. PS No. 324 CAT (B) |
| 16 | Avaition Light for highmast complete in all respecte. as per direction of E/l GDA(GKP) Rate. |
| 17 | Supplying and laying of following size DWC HDPE pipe ISI marked alongwithall accessories like socket, bend, couplers etc. conforming to IS 14930, Part II Complete with fitting and cutting, jointing etc. direct in ground(75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc, complete as required. 90 mm dia(OD-90 mm & ID-76 mm nominal) of approved make & as per direction of E/I. DSR 2022 INo.14.16.2 |
| 18 | S/F of Palm or pin type tin plated copper cable socket (lug) to the cable leads, insulating with tap and makingconnectionetc.completeinallrespectsas per direction of E/I. PS No. 504 (b)6 sq. mm |
| 19 | S/F of Palm or pin type tin plated copper cable socket (lug) to the cable leads, insulating with tap and makingconnectionetc.completeinallrespectsas per direction of E/I. PS No. 504 (f) 35 sq. mm |
| 20 | Add GST@18% on all item |
| 21 | Total |
AI Tender Summary
Tender Timeline
Feb 26, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 04, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 04, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender