Military Engineer Services-MES has published Tender For Repair To Flooring, Tiling Plumbering, Sanitary Fitting, Wooden / Aluminium Joinery To Certain Building At New Rs Colaba Under Age B / R-Ii Under Ge ( Nw ) Navy Nagar, Colaba, Mumbai. Submission Date for this Tender is 01-04-2024. Tile Flooring Tenders in Mumbai Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-04-2024 |
| Sl. No. | Item Description |
| 1 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material & labour for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & labour for Non - skid Ceramic tiles 7 to 8 mm thick size not less than 395mm x 395mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match includingbedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & labour for Non - skid Ceramic tiles 7 to 8 mm thick size not less than 395mmx395mm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed by Engineer-in-Charge. |
| 5 | Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 6 | Supply & fixing powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and locking arrangement etc complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply & fixing aluminium alloy wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminiumwire staples alu shutters complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply & fixing 4 mm thick figured glass pin headed type and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply & fixing 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & labour for aluminium anodised powder coated grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aparture 50mm) complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply & fixing for machine cut kota stone slab single piece length as in jambs/cills/lintel of windows 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing(Note :kota stone single pice of Cill will be fixed in two steps) complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply & fixingVitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply & fixing 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply & fixingpillar tap15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 15 | Supply & fixing 32mm dia LDPE PVC waste pipe of pressure rating 6 kgf/cm2fixed complete to for WHB includding socket & screw complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply & fixing PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply & fixing in repair for ISI marked 15mm bore stop valves /angle valve, fancy type, cast copper alloy, chromium platedscrewed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 18 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supplying and laying of GI tubing Dia 15mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified and directed by Engineer-in-Charge. |
| 20 | Re-fixing old steel tubing and connection in new or old position (Wall, ceiling, floors etc) of 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 21 | Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed by Engr-in-Charge. |
| 22 | Supply & fixing2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge. |
| 23 | Taking down shutters of any description exc 1sqm but n exc 2sqm each complete all as specified and directed by Engr-in-Charge. |
| 24 | Supply & fixing factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed by Engr-in-Charge. |
| 25 | Supply & fixing 35mm thick second class hard wood factory made plain framed panelled shutters (two or three panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face.The size of rail shall be as per IS 1003 (Part-I)kiln seasoned and chemically pressure treated all as specified and directed. |
| 26 | Supply & fixing 35 mm thick factory made flush shutters, solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed by Engr-in-Charge. |
| 27 | Supply & fixing Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)oraluminium wire staples and removing old beading, complete all as specified and directed by Engr-in-Charge. |
| 28 | Supply & fixing for in repair 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl 18/19mm wide and 6mm thick external teak wood lipping fixed with nails and glue to board as in cup board shutter, CB shelves and kitchen cabinate etc like work complete all as specified and directed by Engr-in-Charge. |
| 29 | Supply & fixing Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps when open in 30mm complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply & fixing magnatic door catches including letting in complete all as specified and directed by Engr-in-Charge. |
| 31 | Supply & fixing 125mm size hasp and staple safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 32 | Supply & fixing 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply & fixing 125 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 34 | Supply & fixing 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply & fixing 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 36 | Supply & fixing MS 300mm ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed by Engr-in-Charge. |
| 37 | Supply & fixing 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge. |
| 38 | Supply & fixing in repair magic eye fancy type of brass for door including drilling cutting of holes and making good all complete as directed by Engr-in-Charge. |
| 39 | Supply & fixing mild steelhold fasts, wall ties and similar small articlesconforming to Fe 290 Gde E-165 complete as specified and as directed by Engr-in-Charge. |
| 40 | Material & labour Providing PCC 1:3:6, type B1(20mm graded stone aggregate) for hold fasts complete as specified and as directed by Engr-in-Charge. |
| 41 | Material & labour for two coat synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete as specified and as directed by Engr-in-Charge. |
| 42 | Material & labour for 20mm dia stainless steel rod incl suitable brackets for cupboard rod fixed both ends with bracket complete all as specified and directed by Engr-in-Charge. |
| 43 | Demolition of lime concrete of any descriptionand in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 44 | Material & labour cement concrete 1:5:10 E2 type with with 40mm graded stone coarse aggregate in sunken floor complete all as specified and directed by Engr-in-Charge. |
| 45 | Treatment of sunken floor slab comprises of the following specifications and all as specified (i) Material & labour for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chiesel out any mortar sticking to the surface and brooming / washing completely. 40 mm avg thik pcc 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding conc to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth to be fixed (ii) Rendering of uneven surfaces with 6 mm thick CM 1:4 mixed with and incl integral WPC @3% of weight of cement consumed. fill it with water and check dampness and seepage. where dampness and seepage noticed nozzles shall be fixed and grouting carried out (iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty (iv) After drying puttywash the slab and sides of sunken portion with water and make it clean and clear (v) Material & labour for applying two coat of polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. The thickness of two layer shall be 1 mm. When the second layer is still sticky , coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed. (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20 mm thk cm 1:4 mixed with and incl integral WPC 3 % of cement consumes as per manufacures specification including rounding of corners and junctions sloping towards spout (vii) All pipes laid in sunken portion shall be covered with 50 mm thk PCC 1:3:6 all around after painting with anticorrossive black japan paint (viii) Height up to and including 14th floor |
| 46 | Note:Test the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage seepage and to the entire satisfaction of GE . Test shall be done in presence ofreps of PMG and record for each sunken slab shall be maintained. the treatment shall be carried out by authorised applicators of chemicals. |
| 47 | Material & labour Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 48 | M & L non skid coloured ceramic tiles 300 x 300 x 7-8mm in floors set and jonted in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick cement mortar screed bedin CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 49 | Material & labour for glazed ceramic coloured tiles as in dado like WC, Bath, Kitchen etc of size 300 x 200 x 7-8mm thick set and jointed with neat cement slurry and pointed with white cement,including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed by Engineer-in-Charge. |
| 50 | Material & labour in repair CI Floor trap dia of outlet 75mm with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply & fixing in repair vitreous china squatting pan "Orissa pattern" long pan of size 580x 440mm with integral foot rests white with "P" or "S" with cement joint,front or back inletincl connection to trap and to flushing pipe,anti-syphonagepipe and making good the floor to match the existingcomplete all as specified and directed by Engineer-in-Charge. |
| 52 | Taking out of existing PVC cistern and refixing after tiling work with new flushing pipe of suitable length, and PVC connection of suitable length complete all as specified and directed by Engineer-in-Charge. |
| 53 | Taking out of existing WHB and pillar tap and refixing after tiling work with new bracket complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & fixing 40mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm offixed to wall, floors for drain out the waste water from Kitchen Sink, WHB etc complete all as specified and directed by Engr-in-Charge. |
| 55 | Supply & fixing in repairs aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to wooden doors / windows shutter with wooden beading (any size) and fixed to aluminium window / vent with aluminium wire staples complete all as specified and directed by Engr-in-Charge. |
| 56 | SSupply & fixing for in repair stainless steel kitchen plate rack made out of 0.63mm thick sheet of size 30" x 36" x 9" of approved pattern & make and wt not less than 7.0 Kg each fixed to wall with CP brass screws complete all as specified and directed by Engr-in-Charge. |
| 57 | Supply and fixing of 04 pieces pulley operated Cloths Drying system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.50 mtr with pulley made up ofDevil mounted and fixed with self tapping screw. Rope will be HDPE double core of 4 mm with rope Guide at locking system to hide rope. Channel to be dia of minimum weight of pipe shall not be less than 0.20 kg/Rm and maximum weight of pipe in one unit not less than 2 kg. Weight of rope shall be not less than the 550 gms / mtrs. |
| 58 | Supply & fixing for in repair powder coated aluminium serrated finish 20/25mm dia curtain rod complete all as specified and directed by Engr-in-Charge. |
| 59 | Supply & fixing for in repair powder coated aluminium fancy types domes cum brackets suitable for 20/25mm dia curtain rod fixed with C/P screws & rovel plugs and fixed to both ends of the curtain rod etc complete all as specified and directed by Engr-in-Charge. |
| 60 | Removing demolished material exc 5 Km but n.exc 15 Km and depositing where directed by Engr-in-Charge. |
| 61 | (Note:- For item No 1 to 59 Work for few of the items may be carried out at G+14 bldg including top roof, parapet and shaft walls, cost for scaffolding & safety measures for repairs shall be inlcuded in the rates quoted by the bidder). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
