Bulandshahr Development Authority has published Tender For Restoration Renovation Of Place Site Work No 1 Gst Office Hetu Diye Jane Wale. Submission Date for this Tender is 02-03-2024. Civil Work Tenders in bulandshahr Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | First class Brick Work in in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure including necessary Cutting & moulding of brick but for walls of one brick thickincluding supply of all materials, labour and T&P etc. requried for proper completion of the work. UPPWD SOR 2022 SI.No.[305(a)+309+310] |
| 2 | First class Brick Work in in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure including necessary Cutting & moulding of brick but for walls of Half brick thick,including supply of all materials, labour and T&P etc. requried for proper completion of the work. UPPWD SOR 2022 SI.No. [305(a) + 309 + 310 + 310(a)] |
| 3 | 12 mm thick plaster with cement and coarse sand mortar in 1:4. over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. UPPWD SOR 2022 SI.No. 584 (New Item) |
| 4 | 12 mm thick plaster with cement and coarse sand mortar in 1:3 over 1/2 brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. UPPWD SOR 2022 SI.No. 583 |
| 5 | Providing wall putty on new surface with approved quality material of Berger/ J.K. / Birla or similar make 2 coats. UPPWD SOR 2022 SI No 15.26 [New Item] |
| 6 | Finishing wall with weather coat by premium acrylic exterior paint applied @ 3.28 ltr/10 sqm (Asian or Berger Brand) of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer of approved brand and manufacturer exterior primer applied @ 2.20kg/10 sqm after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of allmaterials, labour, Tools & plants etc. required for proper completion of the work UPPWD SOR 2022 SI.No. 15.23 [New Item] |
| 7 | Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.UPPWD SOR 2022 SI. No. 649 + 650 |
| 8 | Providing & fixing false ceiling at all heights with With semi perforated 12 mm thick micro tegular edged GRG false ceiling approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. DSR 2023 (26.26.1) |
| 9 | Providing and laying vitrified floor tiles 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. UPPWD SOR 2022 14.26(b) New Item |
| 10 | Providing & fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead & if required angle threshold of mild steel angle of section 50x25 mm,or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate & shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C. Including Supply of all materials,Labour ,T&P etc DSR 2023 10.14.2.1 |
| 11 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie, rods, grating etc, (when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required for completion of work. UPPWD SOR 2022 SI No. 502 |
| 12 | Supply and fixing Galvanized fly and Mosquito proof stainless steel grade 304 wire mesh gauge with 0.5 mm dia wire and 1.4 mm wire aperture proof over windows)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. UPPWD SOR 2022 SI.No. 455(a) |
| 13 | Supply & fixing 32 mm. thick Commercial flush door shutters conforming of I.S. 2202 Part- 1(1983) Including fixing of wooden cleats,stoppers & including fixing and adjustment of hinges,bolts,locks,handles & springs (excluding cost of fittings). Including Supply of all materials,Labour ,T&P etc UPPWD SOR 2022 SI.No. 470(a) |
| 14 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) DSR 2023 21.1.1.1 |
| 15 | Factory made PVC rigid foam sheet 1 mm thick DSR 2023 8006 |
| 16 | Providing & fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete125mm. Including Supply of all materials,Labour ,T&P etc DSR 2023 9.165.2 |
| 17 | Providing & fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door,with necessary screws etc complete as per direction of Engineer- in-charge. Including Supply of all materials,Labour ,T&P etc DSR 2023 9.113 |
| 18 | Providing & fixing approved brand & manufacture SS 304 grade Tower Bolt 150mm long with 10mm dia fixd with SS screws etc.complete in all respect as per manufacturer specifications and as directed by Engineer in Charge. Including Supply of all materials ,Labour ,T&P etc DSR 2023 0701 |
| 19 | Providing & fixing bright finished brass hanging type floor door stopper with necessary screws,etc . complete.Including Supply of all materials,Labour ,T&P etcDSR 2023 9.82 |
| 20 | Providing & fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg & door width from 701 mm to 1000 mm),with double speed adjustment with necessary accessories & screws etc complete .Including Supply of all materials, Labour ,T&P etcDSR 2023 9.84 |
| 21 | Providing & fixing panelled or panelled & glazed shutters for doors,windows & clerestory windows, fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.30 mm thick shutters.Including Supply of all materials,Labour ,T&P etc DSR 2023 9.5.1.2 |
| 22 | Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). UPPWD SOR 2022 S.I. No.691 |
| 23 | RCC work with cement approved coarse sand and 2 cm gauge approved stone grit in proportions of 1 : 1½ : 3 in slab excludingsupply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI binding wire including centering and shuttering etc. all materials labour, Tools & Plants etc. required for proper completion of the work including cost of binding wire the rates excludes making of drip course which shall be paid extra. UPPWD SOR 2022 S.I. No. 284 New Item |
| 24 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in charge within a distance of 60 metre (200 feet). UPPWD SOR 2022 SI No. 697 |
| 25 | Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work UPPWD SOR 2022 SI. NO. 279 |
| 26 | Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3"x5") cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs UPPWD SOR SI No. 520 |
| 27 | Providing and fixing top cover for rolling shutters 2.50 meter wide. UPPWD SOR 2022 S.I.No. 522 |
| 28 | Providing and fixing ball bearing for rolling shutters. UPPWD SOR Si No. 523 |
| 29 | Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per direction of Engineer in Charge .Concealed work, including cutting chases & making good the walls etc.15 mm nominal dia Pipes Including Supply of all materials,Labour ,T&P etc DSR 2023, 18.8 (20 mm) |
| 30 | Providing & placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked,of approved make Sintex or equivalent with cover & suitable locking arrangement & making necessary holes for inlet,outlet and overflow pipes but without fittings & the base support for tank.Including supply of all materials,Labour ,T&P etc And Including All taxes,labour cess,Royalty Etc DSR 2023, 18.48 |
| 31 | P.V.C. Pipe (6Kg./sqcm.pressure) Kissan / Supreme Quality or Equivalent. UPPWD SOR 2022 32 (iii) 110MM |
| 32 | P.V.C. Pipe (6Kg./sqcm.pressure) Kissan / Supreme Quality or Equivalent.UPPWD SOR 2022 32 (iv) 160MM |
| 33 | Providing & fixing C.P. brassbib cock of approved quality confirming to ISI standards of approved make Including Supply of all materials,Labour ,T&P etc DSR 2023, 18.49 15mm nominal bore. |
| 34 | Providing & fixing C.P. brass angle valve for basin mixer & gyser points of approved quality confirming to IS:8931 of approved make.Including Supply of all materials,Labour ,T&P etc DSR 2023, 18.53.1 |
| 35 | Providing & fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.Including Supply of all materials,Labour ,T&P etcDSR 2023, 18.53A |
| 36 | Providing & fixing wash basin with C.I. brackets,15 mm C.P. brass pillartaps,32 mm C.P. brass waste of standard pattern,including painting of fitting sand brackets,cutting & making good the walls wherever require:White Vitreous China Wash basin size 550x400mm with a pair of 15 mm C.P. brass pillar taps Including Supply of all materials,Labour ,T&P etc DSR 2023, 17.7.4 |
| 37 | Providing & fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Including Supply of all materials,Labour ,T&P etcDSR 2023, 17.28.2.1 (32mm Flexible pipe) |
| 38 | Providing & fixing toilet Paper holder standard size ISI marked C.P. brass of approved make.Including Supply of all materials,Labour ,T&P etcDSR 2023, 17.34.1 |
| 39 | Providing & fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe & C.P. brass spreaders with brass unions & G.I clamps complete of approved make,including painting of fittings,brackets,cutting & making good the walls & floors wherever required. Three urinal basin with 10 litre whiteP.V.C.automatic flushing cistern.Including Supply of all materials,Labour ,T&P etcDSR 2023, 17.4.1 |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests.[DSR 2023, 17.3.1] |
| 41 | Providing & fixing PTMT liquid soap container 109 mm wide,125 mm high & 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality & colour, weighing not less than 105 gms Including Supply of all materials,Labour ,T&P etcDSR 2023, 17.71 |
| 42 | Providing & fixing PTMT towel ring /Trapezoidal /circular shape 215 mm long,200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality of approved make & colour, weighing not less than 88 gms.Including Supply of all materials,Labour ,T&P etc DSR 2023, 17.72 |
| 43 | Providing & fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets & guard rail complete fixed with 40 mm long screws,rawl plugs etc.complete.Including Supply of all materials,Labour ,T&P etc DSR 2023, 17.33 |
| 44 | Providing & fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.Including Supply of all materials,Labour ,T&PDSR 202317.16A. |
| 45 | Providing & fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved make & colour.Including Supply of all materials,Labour ,T&P etc DSR 2023 18.74.2. |
| 46 | Providing & fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws & washers complete.Including Supply of all materials,Labour ,T&P etcDSR 2023 17.31 |
| 47 | Providing & fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm,height of 75mm with concealed fitting arrangements,weighing not less than 106 gms.Including Supply of all materials,Labour ,T&P etcDSR 2023 18.65 |
| 48 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board( 610x510 mm bow depth 200 mm) as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : As Per DSR 2023,No.17.10.2.1. |
| 49 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars [DSR 2023, 5.22.1] |
| 50 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete. DSR 2023 8.31 |
| 51 | Painting or varnishing work in small areas or new work with one coat (upto one sqm) of ready mixed paint and two coat of approved superiour quality ready mixed paintincluding supply of all Materials,labour,tools & plants etc. required for proper completion of the work.Paint to be used should confirm the ISI no.103-1950.[SI No.641+642]2022 |
| 52 | Wiring point for light with 1.5 sqmm. F.R. PVC insulated mutli strand single core copper conductorcable inPVC heavy gauge rigid conduit pipe partly concealed in wall and partly laid in slab alomgwith the reinforcement before concreting, complete with 1.5 sqmm F.R. PVC insulated mutli strand copper conductor cable as Earth Piano type switch and ceilling rose/angle/batten holder on 3mm thick phenolic laminatedbacklite sheet etc. complete in all respect as directed including matching colour wash. [S.I. No-138 (C) + 187 (a)] |
| 53 | Wiring point for Fan/Fresh air Fan / Light duty exhaust fan with 1.5 sqmm. F.R. PVC insulated mutli strand single core copper cable conductorin heavy dutyPVC heavy gauge rigid conduit pipe partly concealed in wall and partly laid in slab alomgwith the reinforcement before concreting, complete with 1.5 sqmm F.R. PVC insulated mutli strand copper conductor cable as Earth Piano type switch and ceilling rose/angle/batten holder on 3mm thick phenolic laminatedbacklite sheet etc. complete in all respect as directed including matching colour wash.[S.I. No-140(C) + 187(D)] |
| 54 | Wiring point for Call bellwith 1.5 sqmm. FRLSH PVC insulated mutli strand single core copper cable conductorin heavy dutyPVC heavy gauge rigid conduit pipe partly concealed in wall and partly laid in slab alomgwith the reinforcement before concreting, complete with 1.5 sqmm F.R. PVC insulated mutli strand copper conductor cable as Earth Piano type switch and ceilling rose/angle/batten holder on 3mm thick phenolic laminatedbacklite sheet etc. complete in all respect as directed including matching colour wash.[S.I. No-142(C) + 187(E)] |
| 55 | Wire point for HPMV/Power plug with 1.5 sqmm FRLSH PVC insulated multi strand copper cunductor cable as earth wire drawn in side the conduit pipe concealed in the wall complete and partly laid in slab alongwith the reinforcement before concreting copmlete with 14 SWG GI earth continuity wire, 15 Amp. piano type switch and scoket on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect. as directed i/c matching colour wash (S.I. No 143C + 187{C}] |
| 56 | Supply and fixing of G.P. Modular switch box for Module of approved make made up of 1.0 mm thick ISI Marked G.P.sheet including adjestable Nakka and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge |
| 57 | 12 Module SI No. 1152(F) |
| 58 | 10 Module SI No. 1152(E) |
| 59 | 3 Module SI No. 1152(B) |
| 60 | S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve SI No 1009 CAT A |
| 61 | S&F of 63 Amp. DP MCB (10 KA) SI No 1011 CAT A |
| 62 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR E 2022 |
| 63 | 2 x 1.50 MM DSR E 2022, 1.7.1 |
| 64 | 2 x 2.50 MM DSR E 2022, 1.7.2 |
| 65 | 2 x 4.00 MM DSR E 2022, 1.7.3 |
| 66 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. SOR E 1034(B) |
| 67 | S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge SOR E 1026 (A) |
| 68 | Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. CAT. - AAA SOR E 1413(A) |
| 69 | Supplying and laying ofaluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed bythe Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size 16 sq mm x 4 core SOR E 501(i) |
| 70 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. DSR E 2022, 19.1 |
| 71 | S&F of 100 AMP four pole Mouled case type on load change over switch with enclosure including the cost of labour, T & P and material reuired for proper completion of the work as per direction and satisfaction of Engineer an charge. SOR E SINo 378 (A) |
| 72 | Wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , 15A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect including matching colour wash. SOR E SI No 144 (B) + 187 (D) |
| 73 | Supply and fixing of recess/surface mounting round 24 to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA SOR E SI No 1405 |
| 74 | Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. SOR E 2022 SI No. 1131 |
| 75 | Supplying and drawing of UTP 4 pair 6 LAN Cable in the existing surface/ recessed steel/PVC conduit as required. DSR E 2022, 1.53.2 |
| 76 | Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge UPPWD SOR E 148(A) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
