Tender For Proposed Construction Of Sabhagraha At Buddha Vihar Ward No-13, Belongs To Nagar Panchayat Ashti, Dist.Beed.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Mar 2024
0 days left
EMD
69998
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ashti → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Proposed Construction Of Sabhagraha At Buddha Vihar Ward No-13, Belongs To Nagar Panchayat Ashti, Dist.Beed.
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming,watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means.Sr.No.-726, Chapter-Excavation, Reference No-BDA 1, Additional Specification.-Bd.A.1 Page One Number 259, Page No-189, SSR Item No.-21.02. |
| 3 | Excavation for foundation in hard murum including removing the excavated material up todistance of 50 metres beyond the building area and stacking and spreading as directed, dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete.(Liftupto1.50 m) By Mechanical Means Sr.No.-725, Chapter-Excavation, Reference No-BDA 1, Additional Specification.-Bd.A.1 Page One Number 259, Page No-189, SSR Item No.-21.06 |
| 4 | Providing soling using 80 mm size trap metal in15cm.layer including filling voids with Crushed sand /grit, ramming, watering etc. complete.Sr.No.-759, Chapter-Excavation, Reference No-BDA , Additional Specification.-As directed by Engineer incharge, Page No-194, SSR Item No.-21.40. |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand .Sr.No.-835, Chapter-Plain Cement Concrete, Reference No-BDE 4, Additional Specification.-Bd.E.4 Page One Number 289 and B-7, Page One Number38, Page No-216, SSR Item No.-24.08 |
| 6 | Providing and laying in situ/ Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. work in foundations like raft , strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water , formwork, laying/ pumping cover blocks, compact ion and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLCwi th SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand.Bd. Sr.No.-841, Chapter-Reinforced Cement Concrete, Reference No-BDF 3, Additional Specification.-Bd.F.3 Page One Number 298 and B.7, Page One Number38, Page No-219, SSR Item No.-25.11 |
| 7 | Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. columns as per detai led designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compact ion finishing the formed surfaces wi th cement mor tar 1:3 of sufficient minimum thickness to give a smooth and even sur face or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial SandBd .Sr.No.-846, Chapter-Reinforced Cement Concrete, Reference No-BDF 5, Additional Specification.-Bd.F.5 Page One Number 300 and B.7,Page.One Number 38, Page No-221, SSR Item No.-25.31 |
| 8 | Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and st ructural steel). with fully automatic micro processor based PLCwi th SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand .Sr.No.-851, Chapter-Reinforced Cement Concrete, Reference No-BDF 6, Additional Specification.-Bd.F.6 Page One Number 300 and B.7, Page One Number38, Page No-223, SSR Item No.-25.50 |
| 9 | Filling in plinth and floors with approved excavated material in 15cm .to 20 cm. layers including watering and compacting etc. complete. Sr.No.-851, Chapter-Reinforced Cement Concrete, Reference No-BDF 6, Additional Specification.-Bd.F.6 Page One Number 300 and B.7, Page One Number38, Page No-223, SSR Item No.-21.36 |
| 10 | Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed sur faces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC wi th SCADA enabled reversible Drum Typemixer / concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand. Sr.No.-856, Chapter-Reinforced Cement Concrete, Reference No-BDF 8, Additional Specification.-Bd.F.8 Page One Number 302 and B.7, Page One Number38, Page No-225, SSR Item No.-25.70 |
| 11 | Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying / pumping, compaction, finishing un even and honey combed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finishis to be provided and curing etc. complete. (Excludinge inforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc.complete.With fine aggregate (Crushed sand VSI Grade).Sr.No.-868, Chapter-Reinforced Cement Concrete, Reference No-BDF 13A, Additional Specification.-Bd. F. 13 Page One Number 305/I.S. 456 (2000, Page No-229, SSR Item No.-26.25 |
| 12 | Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA. Sr.No.-403, Chapter-Cross Drainage Works, Reference No-CD, Additional Specification.-CD 8 Page 163 , Page No-83, SSR Item No.-11.29 |
| 13 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Sr.No.-876, Chapter-Reinforced Cement Concrete, Reference No-BDF 17, Additional Specification.-Bd. F. 16 Page One Number 306/I.S. 456 (2004, Page No-233, SSR Item No.-26.33 |
| 14 | Providing second class Burnt Brick masonry with convent ional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.Sr.No.-894, Chapter-Brick Masonry, Reference No-BDG 1, Additional Specification.-Bd.G. 1 PageOne Number 313, Page No-242, SSR Item No.-27.01 |
| 15 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete .Sr.No.-897, Chapter-Brick Masonry, Reference No-BDG 5, Additional Specification.-Bd.G.5 Page One Number 315, Page No-242, SSR Item No.-27.05 |
| 16 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the sur face of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for four teen days scaffolding etc. complete. Sr.No.-968, Chapter-Plastering and Pointing, Reference No-Bd.L.7, Additional Specification.-Page One Number 369, Page No-257, SSR Item No.-32.11 |
| 17 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.Sr.No.-964, Chapter-Plastering and Pointing, Reference No-BDL 2B ,Additional Specification.-Bd.L.2 Page One Number 368, Page No-256, SSR Item No.-32.05 |
| 18 | Providing internal cement plaster 20 mm thick in Single coats in cement mortar 1:5 with out neeru finish,to concrete, brick surface, in all positions including scaffolding and curing etc. complete. Sr.No.-965, Chapter-Plastering and Pointing, Reference No-BDL 4 ,Additional Specification.-Page One Number 369, Page No-257, SSR Item No.-32.06 |
| 19 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to10 mm thickness and confirming IS.15622-2006 (Group Bla ) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc .complete.Sr.No.-1029, Chapter-Paving Flooring and dado, Reference No-BDM 12 ,Additional Specification.-Bd.M.12 Page One Number 385, Page No-217, SSR Item No.-33.42 |
| 20 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to10mm thickness and confirming IS.15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete.Sr.No.-1030, Chapter-Paving Flooring and dado, Reference No-BDM 12, Additional Specification.-Bd.M. 12 Page One Number385, Page No-266, SSR Item No.-33.43 |
| 21 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-BIIA)for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Sr.No.-1056, Chapter-Paving Flooring and dado, Reference No-BDM, Additional Specification.-Bd. M-12 page One Number 385, Page No-271, SSR Item No.-33.67 |
| 22 | Providing and laying ceramic tiles of having size 30 cm. x 30cm .and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete..Sr.No.-1017, Chapter-Paving Flooring and dado, Reference No-BDM 13, Additional Specification.-Bd.M.13 Page One Number 386., Page No-264, SSR Item No.-33.24 |
| 23 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coatsincluding scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Sr.No.-1112, Chapter-Colouring, Reference No-BDP 6 ,Additional Specification.-Bd.P.6 Page One Number 414, Page No-280, SSR Item No.-36.12 |
| 24 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in single coat including scaffolding, preparing the surface. (excluding the primer coat ) etc. complete. Sr.No.-1116, Chapter-Colouring, Reference No-BDP 6 ,Additional Specification.-Bd.P.6 Page One Number 414, Page No-280, SSR Item No.-36.16 |
| 25 | Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc .On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete.Sr.No.-1057, Chapter-Paving Flooring and dado, Reference No-BDM, Additional Specification.-As directed by Engineer-In- Charge, Page No-271, SSR Item No.-33.68 |
| 26 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram / One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Sr.No.-1297, Chapter-Iron Work,Reference No-BDU 1A,Additional Specification.-Bd.U.1 Page One Number 537, Page No-329, SSR Item No.-40.02 |
| 27 | Providing and fixing in position (as per 1868 / 1982 ) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram / One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram / One Running Metre. .Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 Kilogram / Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417Kilogram / One Running Metre.Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram / Running metre. and handle and top section 40 x 18 x 1.25 mm at weigh to .417Kilogram / Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquitonet shutter with stainless steel jail with all required screws and nut setc, complete.With powder coating with boxSr.No.-1241, Chapter-Doors and Windows, Reference No-BDT, Additional Specification.-As directed by Engineer in charge., Page No-316, SSR Item No.-39.43 |
| 28 | Providing and fixing 100 mm diastabiliser pipe / P.V.C. soilvent / waste pipe and with necessary fixtures and fitting such as bends ,tees ,single junctions ,slotted vent,clamps etc.complete. Sr.No.-1428, Chapter-Water Supply and Sanitary Fitting, Reference No-BDV,Additional Specification.-As directed by Engineer incharge, Page No-349, SSR Item No.-42.52 |
| 29 | Providing and fixing on walls / ceiling / floor 15mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Sr.No.-1431, Chapter-Water Supply and Sanitary Fitting, Reference No-BDV 5,Additional Specification.-BD.V 5 page551 and as directed by Engineer in charge, Page No-349, SSR Item No.-42.55 |
| 30 | Providing and fixing on walls / ceiling / floor 40mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Sr.No.-1435, Chapter-Water Supply and Sanitary Fitting, Reference No-BDV 5,Additional Specification.-BD.V 5 page551 and as directed by Engineer in charge, Page No-350, SSR Item No.-42.59 |
| 31 | Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories suchas inlet, out let over flow of all tanks capacity above 1000 to 20,000 litres. Sr.No.-1430, Chapter-Water Supply and Sanitary Fitting, Reference No-BDV,Additional Specification.-As directed by engineer-in- charge. and as directed by Engineer in charge, Page No-349, SSR Item No.-42.54 |
| 32 | Providing and fixing 15 mm dia. screw down bib / stop tap of brass including necessary socket union nut complete. Sr.No.-1339, Chapter-Water Supply and Sanitary Fitting, Reference No-BDV 8,Additional Specification.-Bd.V.8 Page One Number 554, Page No-337, SSR Item No.-41.40 |
| 33 | Providing and fixing 1 st class white glazed earthen ware Orissa Type W.C. Pan 580mm dia including P or S trap cast iron soil and vent pipe up to the out side face of the wall (1:5:10) cement concrete bedding 15mm thick ,10 liter P.V.C.flushing cistern with all necessary pipe connection etc. complete. Sr.No.-1409, Chapter-Water Supply and Sanitary Fitting, Reference No-BDV,Additional Specification.-As directed by Engineer in charge. Page No-346, SSR Item No.-42.33 |
| 34 | Providing and fixing white glazed earthen ware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap / cold and hot water pillar tap brackets, rubber plugsand brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the out side face of the wall .Making good the damaged surface, testing etc. complete. Sr.No.-1363, Chapter-Water Supply and Sanitary Fitting, Reference No-BDV 30,Additional Specification.-Bd.V.30 Page One Number 565. Page No-339, SSR Item No.-41.64 |
| 35 | Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. Sr.No.-1376, Chapter-Water Supply and Sanitary Fitting, Reference No-BDV 32,Additional Specification.-Bd.V.32 Page One Number567. Page No-341, SSR Item No.-41.80 |
| 36 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S .6524 1983 having 6mm dia bars 3Nos. And strips @250 mmc/c and fixing in wall with 6Nos. of hold fast of 12mm dia bars 500mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. Sr.No.-1253, Chapter-Doors and Windows, Reference No-BDT,Additional Specification.-As directed by Engineer in charge.. Page No-257, SSR Item No.-39.57 |
| 37 | Providing and fixing fiber glass reinforced polyster door shutter 30mm thick as per IS 14856 (2000) ( Reaffirmed 2006 ) with out ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etccomplete. Sr.No.-1259, Chapter-Water Supply and Sanitary Fitting, Reference No-BDT,Additional Specification.-As directed by Engineer in charge.. Page No-342, SSR Item No.-39.58 |
| 38 | Providing and fixing the Country cut teak wood second class fully glazed openable fan light rectangular in shape as per detailed drawing excluding the frame, stainless steel fixtures and fastenings and finishing the wood work with 3 coats of oil painting. Sr.No.-1201, Chapter-Doors and Windows, Reference No-BDT-4,Additional Specification.-BD-T-4 Page One Number 479. Page No-303, SSR Item No.-39.03 |
| 39 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.Sr.No.-1241, Chapter-Doors and Windows, Reference No-BDT, Additional Specification.-As directed by Engineer in charge., Page No-316, SSR Item No.-39.43 |
| 40 | Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.Sr.No.-1039, Chapter-Paving Flooring and dado, Reference No-BDM, Additional Specification.-As directed by Engineer in charge., Page No-316, SSR Item No.-33.52 |
| 41 | Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc.of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge).Sr.No.-1241, Chapter-Building , Reference No-BDT, Additional Specification.-As directed by Engineer in charge., Page No-409, SSR Item No.-51.192 |
| 42 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.Sr.No.-1191 , Chapter-Roofing and Ceiling, Reference No-BDT, Additional Specification.-As directed by Engineer in charge., Page No-243, SSR Item No.-51.192 |
| 43 | Conference Table @ 1800 x 900 x 750 mm Ht. Providing & Fixing of Main Table @ 1800Lx900Dx750HT - made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 1 Nos.Sr.No.-1857, Chapter-Furniture, Reference No-, Additional Specification.-As directed by Engineer-in-charge, Page No-358, SSR Item No.-51.32 |
| 44 | Full Height Steel Storage @ 750Lx450Dx2100HT Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing.Sr.No.-1862, Chapter-Furniture, Reference No-, Additional Specification.-As directed by Engineer-in-charge, Page No-358, SSR Item No.-51.32 |
| 45 | Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs inCrome finish and seates in silver powder coating finish.Sr.No.-1869, Chapter-Furniture, Reference No-, Additional Specification.-As directed by Engineer-in-charge, Page No-358, SSR Item No.-51.44 |
| 46 | Sofa Set 3+1+1Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five SeatSr.No.-1878, Chapter-Furniture, Reference No-, Additional Specification.-As directed by Engineer-in-charge, Page No-366, SSR Item No.-51.53 |
| 47 | Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc.Sr.No.-1879, Chapter-Furniture, Reference No-, Additional Specification.-As directed by Engineer-in-charge, Page No-366, SSR Item No.-51.54 |
| 48 | Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow.Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MSwith a thickness of 1.2 mm. The legs should have corner brackets welded to it at twolevels. The corner brackets are made of 2mm thick CRCA having a L shaped structure tojoin the side panels and headboard to the leg. Three nos. of Horizontal stiffeners areprovided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mmmade out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a legattached to it to transfer the load to the ground and add to the strength and stability of thecomplete structure. This leg is also made of Square tube of size 25 x 25mm made out ofMS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatmentprocess and should be powder coated to the thickness of minimum 50 Microns DFT.SidePanel: - The side panels are made up of 18mm thick Prelam Particle Board with both sidedecorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding.The overall width of the side panel is 150mm. The side panels have 18mm thick prelamparticle board Baton running for required length to add rigidity to the structure. HeadBoard :- .Sr.No.-1879, Chapter-Furniture, Reference No-, Additional Specification.-As directed by Engineer-in-charge, Page No-366, SSR Item No.-51.55 |
| 49 | Wardrobe with Mirror @ 900LX 600DX 1965HProviding and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required..Sr.No.-1882, Chapter Furniture, Reference No-, Additional Specification.-As directed by Engineer-in-charge, Page No-366, SSR Item No.-51.57 |
| 50 | Bed Side Table @ 400LX 400DX 415H Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding.Sr.No.-1883, Chapter Furniture, Reference No-, Additional Specification.-As directed by Engineer-in-charge, Page No-366, SSR Item No.-51.58 |
| 51 | Kitchen Trolley Providing and Fixing stainless steel kitchen trolley of overall 26 \" height and 22\" depth,supported on aluminium pipes ,trolley basket made out of 5 mm stainless steel rod fitted on telescopic channel of size 1.5 \" x 20 \" x 22 \" on both sides of trolley of 12 \" or above size, panel having 40Kilogramload bearing capacity of trolley made out of 20 mm PUC coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica ,100 mm s.s. decorative handle.(The width and height of individualcompartments shall be kept as directed by Engineer-in-charge).Sr.No.-1884 , Chapter Furniture, Reference No-, Additional Specification.-As directed by Engineer-in-charge, Page No-366, SSR Item No.-51.59 |
| 52 | Supplying on site fresh Garden soil (i. e. 3 part soil) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 0.60 x 0.60 x 0.60m ( consolidated thickness).(As per P&GDSR 2022-23 Items of garden work,Sr No.44a |
| 53 | Supplying on site well decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 0.60 x 0.60 x 0.60m (consolidated thickness).(As per P&G DSR 2022-23 Items ofgarden work,Sr No.44b) |
| 54 | Providing on site required variety of Tree (free from weeds /diesease etc.) 30 cms. apart c/c.Name:-Bahava;Bag Size 13 x13\"\", ht 6-8\"(plants list srno1,item no 5 B) |
| 55 | Excavation pit size 0.60 x 0.60 x 0.60m for planting small & medium ornamental plants/ large flowering/ shady trees (plant height 1 to 2 mtr.)/ palm varieties upto height 1 to 2 mtrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. (As per P&G DSR 2022-23 Items of gardenwork,Sr No.11) |
| 56 | Filling fresh garden soil / silt & manure in excavated pit size area of 0.60 x 0.60 x 0.60m (1/10 of unskilled labour)(As per P&G DSR 2022-23 Items of garden work,Sr No.21) |
| 57 | Mixing garden soil/silt & manure thoroughly well,watering previous night. Planting required plantspecies as directed etc. complete for required pit size 0.60 x 0.60 x 0.60m. (1/10 of semiskilled labour) (Asper P&G DSR 2022-23 Items of garden work,SrNo.26) |
| 58 | Maintenance of Newly Planted tree varieties having height 1mtr. - 2mtr. For First 30 days Only (As per P&G DSR 2022-23 Items of garden work,Sr No.34) |
| 59 | Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 30 cms.( consolidated thickness).(As per P&G DSR 2022-23 Items ofgarden work,Sr No.36a) |
| 60 | Supplying on site well decomposed Farmyard Manure for excavation area of depth of 30 cms. (Consolidated thickness). (As per P&G DSR 2022-23 Items ofgarden work,Sr No.36b) |
| 61 | Providing on site required variety of lawn (free from weeds /diesease etc.) Cynadon/ paspalum/ selection for 1 sqm. area dibbling distance 5 cms. apart c/c. (Asper P&G DSR 2022-23 Items of garden work,Sr No.46) |
| 62 | Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types,soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 cms.(As per P&G DSR 2022-23 Items of gardenwork,Sr No.3) |
| 63 | Filling fresh garden soil / silt & manure in excavated area of depth 30cms. (As per P&G DSR 2022-23 Items of garden work,Sr No.13) |
| 64 | Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover.(1/10 ofsemiskilled labour)(As per P&G DSR 2022-23 Items of gardenwork,Sr No.23) |
| 65 | Maintainance of Newly Developed lawn Area. For First 30 days Only (Paspallum/ selection)(As per P&G DSR 2022-23 Items of garden work,Sr No.28) |
| 66 | TEST ON CONCRETE-compression strength |
| 67 | ROYALTY CHARGES,a) For sand |
| 68 | b) For All Other Minerals = Royalty + surcharge (2%) = 211.95+4.23 = 216.18 per cum |
| 69 | GST 18 % |
| 70 | ADD 1% LABOUR INSURANCE |
| 71 | ADD ELECTRIFICATON CHRGES |
| 72 | CONTENGIENCES 5% |
AI Tender Summary
Tender Timeline
Feb 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 02, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 04, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender