Tender For Repair And Maintenance Work Of Residential Qtrs., At Police Station Sursagar, Pratapnagar, Udaimandir And Dangiyawas Jodhpur
Tender Value
1.15 Crore
Estimated cost
Bid Submission
11 Mar 2024
0 days left
EMD
2.30 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jodhpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Maintenance Work Of Residential Qtrs., At Police Station Sursagar, Pratapnagar, Udaimandir And Dangiyawas Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Repair to cement plaster in cement mortar 1:6 (1-Cement:6-fine sand) including removal of old plaster in regular shape and white or colour washing. |
| 2 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. |
| 3 | Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. |
| 4 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead : Of area 3 square meter and below. |
| 5 | Dismantling of flooring with care including stacking of servceable material and diposal of unserviceable material with in 50 Mtr. Lead forCement concrete flooring. |
| 6 | Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material with in 50 Mtr. lead for : Lime terrace. |
| 7 | Grading roof water proofing treatment with : Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size) |
| 8 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 9 | Providing and laying 20 to 25 mm size glazed tiles pieces for rooof treatment having colour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect. Washing with acid. |
| 10 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 2001 to 5000Sq. Cm : 30 mm thick slab. |
| 11 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 900 Sq. Cm : 30 mm thick slab. |
| 12 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). |
| 13 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Category-I. |
| 14 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 15 | Providing & fixing MS sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of Engineer incharge but excluding cost of chokhats including two coats of anti corrositve red oxide primer panit. MS sheet 20 SWG |
| 16 | Providing & fixing steel glazed doors, windows and ventilators shutters of standard rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. IS 1038-1983. windows side hung (Openable) |
| 17 | Providing & fixing steel glazed doors, windows and ventilators shutters of standard rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. IS 1038-1983.Ventilator centre hung |
| 18 | Making opening in masonary wall including dismantling, fixing lintel/beam and making good the damages to wall and floor complete to match the existing surface including propping the existing structure above the opening excluding cost of lintel/beam etc. |
| 19 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 20 | Painting with enamel paint of approved brand and manufacture in all shades to give an even shade :Old steel work (One or more coats). |
| 21 | Painting with enamel paint of approved brand and manufacture in all shades to give an even shade : Old wood work(One or more coats). |
| 22 | Renewing glass panes, with puty and nails wherever necessary:4 mm thick plain glass panes. |
| 23 | Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meter lead : Of area 3 Square meter and below. |
| 24 | Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete IS 2571-1970 : 50 mm thick with 20 mm thick nominal size aggregate. |
| 25 | Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete |
| 26 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New surface (one or more coats) including scrapping surface and necessary repairs. Colour change |
| 27 | Painting with weather coat paint ( ISI make paint) two or more coat to give an even shade on old work. |
| 28 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehye resin, in glue both sides with approved steel fittings complete as per Annexure ‘A’ IS 2202 (Part I & II) 1999/1983. Commercial Veneer both side 30 mm thick shutter |
| 29 | Add extra for Flush doors For Internal teak wood lipping in 25mm depth in single leaf. |
| 30 | Supply and Fixing S.S. Soft Close Auto hingeof appd make for cabinet shutters |
| 31 | Supply and Fixing S.S. Handle of appd make and design for wardrobe/cabinet shutters Size 150 mm |
| 32 | P&F of PVC door frame made from extruded PVC confirming to IS : 10151 - 1982 section having multi chamber cross section with a maximum wall thickness of 2.8mm + 0.3mm duly reinforced with steel tie rod at bottom, and weather seals complete. PVC door frame section (40x58mm) |
| 33 | P&F of plastic shutter infill made from multi chamber hollow PVC sections having cross section of 200x20x1mm and shutter frame made from Aluminium C section size 23.6x20x1.8mm and door fitting such as hinges, aldrop, handles, stopper, locking bolt will be provided Single shutter door |
| 34 | Labour charges for repair of wooden double leaf door including cutting old damaged wood, panel, chieselling and refixing including screws etc. complete in all respect as per direction of Engineer incharge. Excluding cost of material. |
| 35 | Pointing on stone slab ceiling with cement mortar 1:3 (1-Cement:3-Sand) : Flush pointing. |
| 36 | Pointing on stone masonary in white cement sand mortar 1:3 (1-Cement:3-Sand) with colour pigment approved shade for all type of masonary incl. raking of joint as per specification complete in all respect Deep grooved pointing |
| 37 | Providing and fixing 30 to 40 mm thick stone chajjas in cement sand mortar 1:4 including making gola at junction with wall in cement concrete M-15 grade (1:2:4 nominal mix), drip course : 20 mm thick plastering in CM 1:6 on both faces. |
| 38 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000: 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 40 mm nominal size (Crusher Broken) |
| 39 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls IS 1597 (Part-I) 1992 in : Cement Sand Mortar 1:6 (1-Cement:6-Sand). |
| 40 | Extra for facing as per design and detailed specifications IS 1597 (Part-II) 1992 including additional cost of stonesover item No. 6.1 & 6.2 for : Course rubble facing Second Sort. |
| 41 | Providing & fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification : |
| 42 | Supplying and fixing Soorsagar Bhura or Equivalent ashlar sills, lintels and dassa, bearing, bed & top surface made perfenctly even, jambs, skirting steps etc. rough dressed: Upto 15 cm. thick |
| 43 | Stone slab roofing on ground for with fine grained stone slab from approved quarry with 150 mm top lime terracing with Hemp, Methi, Lime, Sandla with Gur & Gugal (as per JODHPUR PRACTICE) including ralthal, filling of joints of parapet and slab on both sides in cement sand mortar 1:4 lime batta (gola) 75mmx75mm Sandla and ceiling plaster in CM 1:4 with wire and nails etc. complete as per specification for span. Above 2.50 mtr upto 3.30 metre. |
| 44 | Add extra over item no.10.1 for subsequent story First floor |
| 45 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:2:4 light concrete, using brick bats complete levelingand dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. |
| 46 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying Polymen modified cementous slurry mixed with armour cerete of M/s The Structural Water Proofing Company Pvt. Ltd., or Tapecrete of M/s Cico Engineer Service or Hydro Proof of Fosroc consisting of appering : First layer of slurry of cement @ 0.488Kg./sqm mixed with Armourcrete or Tapecrete @ 0.253 Kg/sqm.This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ .242 Kg./sqm mixed with Armourcrete or Tapecrete @ 0.126 Kg./Sam.This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours.The rates includes preparation of surface treatment & sealing of all joints corners, junction with polymer mixed slurry.Note- Rendering /plastering as protective layer, if require will be paid separately. |
| 47 | Supplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges: Kota stone 25 to 30 mm thick. |
| 48 | Providing precast cement concrete jali, nominal mix 1:2:4 (1-Cement:2-Sand:4-stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia Mild steel wire, including centering and shuttering roughening, cleaning, fixing and finishing in cement mortar 1:3 (1-Cement:3-fine sand) etc., complete as per approved design excluding plastering of jambs, sills and soffits up to floor three level. 50 mm thick |
| 49 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing ofIS 3316-1974 : South (Red /Choclate Colour) Above 3601 Cm2 Slab |
| 50 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:Size 530x410mm. |
| 51 | P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor. |
| 52 | Labour charges for removing WVC WC pan India/ Orissa pan |
| 53 | P & F White glazed Conversion Bend for W.C. from P trap to S trap. |
| 54 | P & F Flush pipe of approved make with complete fittings for high level flushing cistern : PVC exposed (heavy) 32 mm. |
| 55 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floorIS 771 (Part-II) -1985. Fire clay glazed kitchen sink (IS Marked) size 600x450x250 mm. |
| 56 | P&F waste pipe with all fitting PVC with PVC Nut 32mm |
| 57 | P&F Grating of approved quality/ make Stainless steel sheet size 125mm dia |
| 58 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : Exposed on wall 15 mm dia nominal bore. A Class |
| 59 | b) 25 mm dia nominal bore. |
| 60 | P & F CPVC Pipes (Internal work) with CPVC fittings (IS:15778 Mark) & M.S. clamps including cutting and making good the walls and floors : Exposed on wall 20 mm dia nominal bore. A Class |
| 61 | b) 25 mm dia nominal bore. |
| 62 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : C.P Brash heavy duty, 15 mm nominal bore. |
| 63 | P & F Stop cock (IS:8931 Mark) superior quality & of approved make : Synthetic material (PTMT) stop cock of approved quality/make 15 mm. |
| 64 | P & F Sink Cocks of superior quality & approved made: C.P. Sink cock swinging spout 15 mm. |
| 65 | P & F Flush Cock/Flush Valve (IS:9758 Mark) or WC of approved quality make : C.P. brass Half-turn exposed 25 mm nominal bore. |
| 66 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15mm nominal bore. |
| 67 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25mm nominal bore. |
| 68 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.a) 500 litres capacity. |
| 69 | b) 750 litres capacity. |
| 70 | Providing and fixing Sperior quality ( Jaquar Continental/ Clarion) CP Brass fittings Complete as per direction of Engineer Incharge Sink cock with swinging casted spout ( table mounted) 15mm nominal size |
| 71 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B\" for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110mm dia |
| 72 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B\" for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.A)Bend 87.5 Dg. 110 mm dia |
| 73 | B) Door Bend 87.5Dg. 110 mm dia |
| 74 | B) Single `Y\" with Door110 mm dia |
| 75 | C) Pipe Clip110 mm dia |
| 76 | D) Single Tee110 mm dia |
| 77 | P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150 X 100mm, 7.2 Kg. C.I. cover with frame, Internal Chamber size 300 X 300mm. |
| 78 | Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450 x 450mm upto depth of 0.5m & 15Kg CI cover with frame |
| 79 | P & F PVC Floor trap (Nahni) of (IS:1729 Mark) of approved quality / make with socket down or hinged grating including cutting and making good the floor. Size 100x100 mm. |
| 80 | P & F PVC Floor trap (Nahni) of (IS:1729 Mark) of approved quality / make with socket down or hinged grating including cutting and making good the floor.Size 100x75 mm. |
| 81 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 530 mm x 450 mm |
| 82 | P&F Beveled edge mirror of special glass of approved ISI makecomplete with6mm thick asbestos cement sheet ground fixed to wooden scrwes & washers. Size 600 x 450mm x 4mm thick |
| 83 | P&F towel rail or ring of approved quality /make: C.P. brass towel rail with bracket 600 x20mm. |
| 84 | Providing and fixing curtail rod of 1.25mm thick chromium plated brass platc, with two chromium plated brass brackets fixes with C.P brass screws and wooden pluge, etc. |
| 85 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI markedMMS ( IS:9537 P - III ) PVC conduit & it\"s accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& false ceiling point,6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. Group - 2 |
| 86 | (A) Short point (up to 3 mtr.) |
| 87 | (B) Medium point (up to 6 mtr.) |
| 88 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it\"s accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board ,6 Aswitch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.Group-2 |
| 89 | (A) On board |
| 90 | (B) Short point (up to 3 mtr.) |
| 91 | (C) Medium point (up to 6 mtr.) |
| 92 | (D) Long point(up to 10 mtr..) |
| 93 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit with Wire mesh and making good the same as required. Group-2 |
| 94 | (A) 20 mm |
| 95 | (B) 25 mm |
| 96 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. Switch and socket outlet, making connection , testing , etc. as required. Group -2 |
| 97 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. Group -1 |
| 98 | (A) 3x 1.5 sq.mm |
| 99 | (B) 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 100 | (C) 4 x 6.0 sq.mm |
| 101 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. |
| 102 | Single pole MCB |
| 103 | 6 A to 32 A rating |
| 104 | Double pole MCB |
| 105 | 40 A 63 A rating |
| 106 | P & F ISI marked flush/surface type buzzer including making connection testing etc. as required. |
| 107 | P & F IS:371 marked6 amp surface type ceiling rose including making connection testing etc. as required. |
| 108 | P & F ISI marked6 amp bakelite batten/angle holder including making connection testing etc. as required. |
| 109 | P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required. |
| 110 | 200mm x 250mm x 100mm |
| 111 | P & F paper phenolic resin bondedlaminates confirming to IS : 2036 -1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc platednut and bolts as required. 3.0 mm thick |
| 112 | P & F ISI marked (IS :3854) 6 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. |
| 113 | P & F ISI marked (IS :1293) 3 pin 6 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. |
| 114 | Providing & Fixing of IS 11037:1984 marked non modular socket size flush type 120 watt rotary minimum 5 step fan regulator with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of produ work, refer Annexure \"A\" attached with this BSR |
| 115 | P & F of M.S. J- hook of standard design made out of 16 mm dia. M.S. round bar and fixed withcement concrete mortar with required support as required. |
| 116 | P/F heavy duty capacitor start, coppar waind dubble ball bearing 900/1400 RPM single phase exhaust fan as per PWD specification for elctricalwork, conforming to IS: 2312 ISI marked in existing opening including making connections testing etc. as required. OEM shall be an ISO certified company. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR . |
| 117 | 300 mm sweep(900/1400 RPM) |
AI Tender Summary
Tender Timeline
Feb 26, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMar 11, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 12, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender