Military Engineer Services-MES has published Tender For Additional/Alternator To Bldg No P-50 And P-51 At Af Stn Barnala Under Ge (Af) Halwara. Submission Date for this Tender is 23-03-2024. Mobile Generator Tenders in barnala Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-03-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc.complete all as specified and directed. |
| 3 | M&L Brick work with sub class ‘B’ Bricksstraight or curved on plan exc 6M mean radius and built in CM in 1:6 complete all as specified and directed. |
| 4 | M&L Brickwork with sub class "B" Bricks,Straight or curved on plan to any radius in half brick thick wall built in Cement Mortar 1:4 complete all as specified and directed. |
| 5 | Taking down cement plaster on brick walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 6 | M&L 12mm thick cement plastering in cement mortar (1:6) on other thanfair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed. |
| 7 | M&L 15mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with WPC finished even & smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured & paid seperately as "supply Only". |
| 8 | M&L 5mm thick cement plastering in cement mortar (1:3) as on ceiling surfaces finished even and smooth without using extra cement complete all as specified. |
| 9 | M&L for preparation of new plastered surfaces and applying two coat of distemper oil emulsion over acoat of primer and over wall care putty complete all as specified and directed.. |
| 10 | M & L for Complete removal of old existing treatment and applying two coats ofdistemper oil emulsion over one coat of priming coat and filling the surface of walls with wall care putty complete all as specified and directed. |
| 11 | M&L for preparation of new plastered suraces and applying two coats of cement base paintover a coat of primer complete all as specified and directed. |
| 12 | M&L for Complete removal of old existing treatment on wall surfaces and applying two coats of cement base paintover a coat of primer complete all as specified and directed. |
| 13 | M & L for preparation of new plastered surfaces and applying three coat of white wash on ceiling surfaces complete all as specified and directed. |
| 14 | M& L for Complete removal of old existing treatment and applying three coat white wash on ceiling surfaces complete all as specified and as directed. |
| 15 | M & L for preparation of new plastered surfaces and applying three coat of white wash on Wall surfaces complete all as specified and directed. |
| 16 | M&L for Complete removal of old existing treatment and applying three coat of white wash on wall surfaces complete all as specified and as directed. |
| 17 | Taking down of chowkat / frames with shutter (w/o takingoff shutter from frames) n.exc 1.5 Sqm each complete all as specified and directed. |
| 18 | All as per item No 17 here-in-after but exceeding 1.5 Sqm but not exceeding 4 Sqmeach. |
| 19 | Taking down shutters of any description esceeding 1.00 sqm but n Exc 2.00 sqm each complete all as specified and directed. |
| 20 | S & F factory madeBox type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of 12 mm dia square guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: -(i) Glazing & Wire cloth shall be measured and paid separately. (ii)The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively. |
| 21 | S&F steel ventilator with side hung shutter including hinges,. Steel peg stay, complete all as specified and directed. |
| 22 | S&Ffactory made pressed steel frames made out from 1.25mm thick steel sheetfor doors of size 125x60 mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed. |
| 23 | S&Ffactory made pressed steel frames made out from 1.25mm thick steel sheetfor doors of size 105x60 mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed. |
| 24 | Supply and fixing for 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24(a); supplied and fixed to chowkats complete all as specified and directed. Note: Glazing and Wire cloth shall be measured and paid separately. |
| 25 | S & F factory made Plain, framed, panelled shutters, 35mm thick, 2nd class hard wood , plain, framed, panelled shutters (any number of panels), with panels of 9mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 26 | S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed. |
| 27 | S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150mm and fixed complete all as specified and directed. |
| 28 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 29 | S&F Aluminium anodised Cast type handle of 150mm size complete all as specified and directed. |
| 30 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 31 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 32 | Supply & fixing in repairsstainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 33 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 34 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pan complete all as specified and directed. |
| 35 | S&F floor door stopperof aluminium alloy body and tongue, long anodized with hard drawn steel spring fixed length of cover plate 15 cm long complete all as specified and directed. |
| 36 | S&F in repairs 25 mm dia Harison rails , mild steel , chromium plated withfixing fancy type brass CPbrackets and side knobs , stops ,rollers etc as in curtain rod and fixed to wall complete all as specified and directed. |
| 37 | M&L for prepration of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of girth over 10 cm, complete all as specified and directed. |
| 38 | All as per item No 37 but except red oxide primer . |
| 39 | M&L for preparation of old steel surfaces and applying onecoat of synthetic enamel paint, over 10 cm girth,complete all as specified and directed. |
| 40 | M&L for preparation of new wooden surfaves and applying 2 coats of synthetic enamel paint over a coat ofpink primeron new wooden surface of girth over 10 cm,complete all as specified and directed. |
| 41 | M&L for preparartion of old wooden surafaces and applying onecoats of synthetic enamel paint on old wooden surface of girth over 10 cm,complete all as specified and directed. |
| 42 | S&F PVC door frame of size50x47 made out of 5mm wood grain printed PVC sheet, reinforced with ms square tube complete all as specified and directed. |
| 43 | S&F 30mm thick PVC factory made moulded door shutter as IS-4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat moulded wood grain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and wood grain colour PVC sheet for top rail ,lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of wood grain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings, complete all as specified and directed. |
| 44 | S & F 25 mm thick Flush shutters,solid core construction ,with block boards core and ply wood face panels,commercial type on both sides as in cupboards shutters complete all as specified and directed. |
| 45 | S&F of 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed. |
| 46 | S&F 100mm Hasp and staple, safety type aluminium anodised with mild steel hinge pinincluding bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 47 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 48 | M&L joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm(square/rectangular)in floor etc set joints in neat cement slurry and pointed in white or coloured cementto match the floor over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 49 | M&L joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm(square/rectangular)in floor etc set joints in neat cement slurry and pointed in white or coloured cementto match the floor over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 50 | All per item No 49 above but as in skirting over rendering 10mm thick in CM 1:4. |
| 51 | M & L for 25mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate as in sub base of floor tiles complete all as specified and directed. |
| 52 | M&L joint less Glazed ceramic coloured tiles in vertical surface 300x200x7mm/300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 53 | M&L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protections/ path including necessary form work complete all as specified and dircted. |
| 54 | M&L for 20-25mm thick machine cut kota stone slab flooring, laid, jointing and pointing with grey cement slury mixed with pigment to match the shad of slab including grinding and polishing over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 55 | All as per item No-54 but as in skirting /dado over and including 10 mm thick rendering in CM 1:4 . |
| 56 | Demolition of stone slabs and tiles of any description or thickness in floor, aprons etc, laid, bedded and pointed in any cement mortar and including removal of debrish & rubbish from the site complete all as specified and directed. |
| 57 | M&L for granite 20mm thick (of any type ) work (table rubbed and polished) in cooking plateform and like in cement mortar 1:4 including pointing in white cement(1:2)using marble dust making holes in RCC shelves suitable forgas pipe with round edges where required complete all as specified and directed. |
| 58 | M&L for Rounding to edges of stones slabs one edge ,such as in steps, cooking plateform and other similar works 18-20mm thick complete all as specified and directed. |
| 59 | Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore complete all as specified and directed. |
| 60 | Taking down or up steel tubing and connection s inculding cleaning for refixing or removal to store 20mm bore complete all as specified and directed. |
| 61 | S&F Tube "medium grade" galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore complete all as specified and directed. |
| 62 | All as per item No-61 above but 20mm bore. |
| 63 | S&F in repair stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete all as specified and directed. |
| 64 | S&F in repair rotational moulded water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position capacity 500 ltrs, triple layer, white color, with 20mmball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball (Minimum weight 210 gms) complete all as specified and directed. |
| 65 | S&F in repair rotational moulded water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position capacity 1000 ltrs, triple layer, white color, with 20mmball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball (Minimum weight 210 gms) complete all as specified and directed. |
| 66 | S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed. |
| 67 | S&F in repair cast iron floor trap of 75 mm dia with chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed. |
| 68 | S&F in repair wash hand basinvitreous white chinaware of 550x400 mm size including 15 mm dia CP pillar tape cast copper alloy fancy type, CI/MS brackets,PVC waste pipe , waste coupling of suitable size/length, and all connection complete all as specified and directed. |
| 69 | S&F in repair vitreous china squating pan "Orissa" pattern size 580 x 440 mm white with integral foot rest including connection to trap and to flushing pipe, antyi syholic pipe etc, complete including making good to floor. |
| 70 | S&F China ware coloured EWC complete set including flushing cistern with internal fitting, coloured PVC seat cover, bend including chromium plated brass jet faucet suitable for EWC with PVC Chord and brass nozzle and fixed to pipe complete all as specified and directed. |
| 71 | S&F Health faucet (ABS body) mild steel chromimum plated suitable for 15mm dia pipe with 1.2 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 72 | S&F in repair syphonic action PVC low levelflushing cistern of 10 ltr capacity including internal fittings, brackets,32mm flush pipe etc, complete all as specified and directed. |
| 73 | S & F in repairPVC connection 45 cm long with two nuts and washers complete all as specified and directed. |
| 74 | Supply and fixinglooking mirror of selected quantity mounted on 4mm thick AC plan building board of 600x450mm complete all as specified and directed. |
| 75 | S&FCP brass towel railwith brackets of selected quality size 450mm long complete all as specified and directed. |
| 76 | S&Fgrating around 100mm size of PTMT (minimum wt 25 gms) complete all as specified and directed. |
| 77 | S&F in repair chromium plated shower rose& arm with or without swivel joints suitable for fixing to steel pipe of 15 mm bore complete all as specified and directed. |
| 78 | S&F in repair bib taps long body, C P cast copper alloyfancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed |
| 79 | S&F in repair stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe of 15 mm bore complete all as specified and directed. |
| 80 | S&F in repair stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe (concealed type) of 15 mm bore complete all as specified and directed. |
| 81 | S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 82 | Dismantling and taking out of 75 to 100 mm dia cast iron pipes, jointed in cement mortar and fixed to wall or laid in trenches complete all as specified and directed. |
| 83 | S&F for 100 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints fixed on walls/trenches etc with clamps complete all as specified and directed. |
| 84 | S&F for 75 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints fixed on wall/trencheswith clamps complete all as specified and directed. |
| 85 | S&F cast iron bends (any radius) diminishing pieces or tappers (larger bore measured) for 100 mm bore pipe complete all as specified and directed. |
| 86 | All as per item No. 85 here in before but of 75 mm bore. |
| 87 | S& F cast iron cowls 50mm bore of pipe complete all as specified and directed. |
| 88 | Demolition of cement conrcete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 89 | Dismantling brick tiles or terracing tiles, single layer on roof complete all as specified and directed. |
| 90 | Roughening surfaces of old/concrete floor by backing sweeping clean with iron brush and washing down with water etc complete all as specified and directed. |
| 91 | M&L for 50mm thick (average thickness) PCC(1:2:4) type B1,(using 20mm graded stone aggregate) finish even and smooth with using extra cement complete all as specified and directed. |
| 92 | M&L for PCC 1:2:4, type B-1, padding concreteor in roof kerbs using 20 mm garded stone aggregate for roofs complete all as specified and directed. |
| 93 | M&L for 15 mm thick screed bed in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound by 3% by weight of cement or as per manufacturers instructions complete all asspecifiedand directed. Note :-Water proofing compound will be measured and paid seperately. |
| 94 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 95 | M&L for Preparation of roof top surfaces and applying single component elastic cold applied polyurethene modified acrylic roofing system ,co elastic technology (CET) based on modified polyurethene and fully fibre reinforced having sun Reflectivity index (SR) of 106on top of concrete roof surfaces all cracks upto 3mm at corner joints channel and parapets should be treated with crack seal . Applying three coats including one coat of primer of Shali urethene BTD/Sikalastic 560/smart care damp proof ultrahaving coverage @ min 0.75Kg/Sqmand dilution upto 10% and laying reinforced fibre net and applying two coats of shaliurethene BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2Kg/sqm in two coats for maintaining minimum dry film thickness 1.50mm and elongation at break of free film of approx 350% The material shall be applied with brush or rooller ,complete in all respect as per the direction of Engineer -in-Charge . Note :(i) 6hrs interval between two coat will be maintain. (ii)All auxillary and accessories involved during application should be supplied by single manufacturer as part of system . (iii)The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (iv) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years . However contractor may deposit the FDR of same amount in favour of Ge . If contractor fail to rectify the defect pointed out during this period in writing , the defect shall be got rectified at contractor " risk and cost and the payment shall be made from the amount ofkept reserved or by encashing the FDR deposited by the contractor as guarantee. the contractor"s quoted rates for this item shall deemed to be inclussive of this aspect. Make: STP/Sika/Asian paint or equivalent as approved by GE. |
| 96 | S & F in repair stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm with fixing arrangements complete as per sample kept in GE’s office suitable for officers quarters complete all as specified and as directed. |
| 97 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 98 | M&L for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in stair cases, lintels, RCC chajjas, and sunshade etc. set in cement mortar 1:6 complete all as specified and directed. |
| 99 | M&L for Reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in stair cases, lintels, RCC chajjas, and sunshade etc. complete all as specified and directed. |
| 100 | M & Lfor 10mm dia TMT bars cut to length bentto shape as required including binding withmild steel annelid wire not less than 0.90mm dia complete all as specified and directed. |
| 101 | M & Lfor 8mm dia TMT bars cut to length bentto shape as required including binding withmild steel annelid wire not less than 0.90mm dia complete all as specified and directed. |
| 102 | M&L for Use & waste for formwork to sides and soffits of shelves, shelves, suspended slab, chajjas including support, overhanging etc. for rough finished surfaces of concrete flat complete all as specified and directed. |
| 103 | S&F anodised aluminium powder coated (50 micron thick) door shutters, aluminium section weighing 0.55 kg/m with and including necessary joiningcleats, glazing clips, rubber neoprene packing, extruded anodised aluminium alloy fabricated type handles of size 150mm 2 Nos is each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes /other filling material in panels, screws etc complete all as specified and directed. Note :- Glass panes / other filling materials in panels shall be masured and paid separately. |
| 104 | S&F aluminium powder coated (50 micron thick) window and ventilatorwithside hung shutters with sash bars section weight 0.55 kg/RM, necessary jointing cleat rubber neoprene packing, glazing,clip,handles CP hinges, tower bolts etc packing,anodised snap beading, screws complete allas specified and directed. |
| 105 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed. |
| 106 | S&F aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and fixed complete all as specified and directed. |
| 107 | S&F 100mm, 4 levers, aluminium mortice lock vertical type complete all as specified and directed. |
| 108 | M&L for 5.5mm thick sheet glass, selected quality and glazing with aluminium beading in square n exc 0.5 sqm. in each pane complete all as specified and directed. |
| 109 | All as per item No-108but 5.5 mm thick glass in panes each exc. 0.5 sqm. |
| 110 | S& F in repais cast iron cowls 100mm bore of pipe complete all as specified and directed. |
| 111 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, in any position(with clamps in wall) complete all as specified and directed. |
| 112 | S&F PVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 113 | Taking down copper/aluminium point wiring (light, fan, socket or power)complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 114 | M&L Point wiring complete with PVC insulated , FRLS, unsheathed, flexible, bright anneled cable 1100 V grade conforming to IS-694 1.5 Sq mm (nominal area) mult-stranded cable with copper conductor drawn through and including heavy grade non metallic rigid PVC casing caping of suitable size (ISI marked) andaccessories fixed to walls/ floors/ ceilings / roofs etc. with sunken type pressed steel/ welded MS terminal boxes factory made out of 16 gauge, MS sheet with hold fasts, 3mm thick laminated sheet top cover for mounting of fittings switches, socket outlets, regulators etc. fixed flush with wall including provision of PVC insulated FRLS, unsheathed 1100 Volts grade, 1.50 Sqmm multistranded copper earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:- |
| 115 | One light point / Fan point ,Bell point controlled by one, one-way switch, |
| 116 | Oneswitch socket outlet 3 pin 5 Amps,on Same board |
| 117 | One switch socket outlet 2/3 pin 5 Amps,on Independent board. |
| 118 | All as per item No 114 above butwith 2.50 sqmm PVC insulated FRLS, multistranded copper conductor cable 1100 V grade and 2.5 Sqmm PVC insulated FRLS multistranded copper conductor cable 1100 V grade for one 3 pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed. |
| 119 | S&F Switch piano, flush type, 5Amps, single pole, one way complete all as specfied and directed. |
| 120 | S&F Switch Socket combination piano, flush type, 15 Amps, singel pole, one way complete all as specfied and directed. |
| 121 | S&F Socket 3 pin5 Amps, singel pole, one way complete all as specfied and directed. |
| 122 | S&F Ceiling rose surface bakelite 65x50mm two to three terminal complete all as specfied and directed. |
| 123 | M&L for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specfied and directed. |
| 124 | Supply and fixing Regulator step type 300 Watt 240 Volt for Ceiling Fan complete all as specfied and directed. |
| 125 | S&F in replacement building security light fittingLED TYPE 35 watt optic lenses with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 32 mm bore “light grade” brackets 1.5 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed. |
| 126 | S&F in replacement LED Batten Tube Light light fittings18 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulatedcomplete all as specified and directed. |
| 127 | S&F in replacement LED Batten Tube Light light fittings10 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulatedcomplete all as specified and directed. |
| 128 | Taking down and refixing of existing Old Tube light fittingcomplete including making connection with copper flexible wire 2 core 23/0.0076 from ceiling rose to fitting complete all as specfied and directed. |
| 129 | Supply and Fixing in repairMCB TPN 415 Volt 63 Amps complete all as specfied and directed. |
| 130 | Supply and Fixing in repair MCB SPN6 to 40 Amps, 240 Volts complete all as specfied and directed. . |
| 131 | Supply and Fixing MCB SP 6 to 32 Amps 240 volts, 15 Hz, 10 KA suitable for lightening load of capacity 6 to 32 Amps. |
| 132 | S&F IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Ampsrated bus bar, neutral link each bar and din rail complete all as specified and directed. |
| 133 | S&F IP-42 protection distribution board, TPN 4 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Ampsrated bus bar, neutral link each bar and din rail complete all as specified and directed. |
| 134 | Supply and Fixingload line DB Double door including MCCB 100 Amps including dismantelling of existing panel of wall and fixing new load line box and doing the existing connection in new load line with SP ,SPN ,TPN complete all as specfied and directed. Note : SP ,SPN ,TPN shall be measured and paid Separetely. Making good to disturbed surfaces shall deemed to be included in quoted rate. |
| 135 | S&F in repairsingle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specfied and directed. |
| 136 | M&L in replacement submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 6 sqmm drawn through and including heavy grade PVC casing caping of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 6.0 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note: (a) Two runs of 6 Sqmm single core copper cables and One run of 6.0 Sqmm earth conductor cable with casing capping/conduit will be measured and paid as one unit length. |
| 137 | M&L in replacement submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 4 sqmm drawn through and including heavy grade PVC casing caping of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all conduit acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 4.0 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note: (a) Two runs of 4 Sqmm single core copper cables and One run of earth conductor cable of 4.0 with casing capping/conduit will be measured and paid as one unit length. |
| 138 | M&L for earthing in repair complete with galvanized steel earth plate electrode of size60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metredeep below normal ground level with top edge of the plate not lessthan1.5 metre below normal groundlevel surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type B-1 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I (2009) complete all as specfied and directed. Note : RCC pit cover shall be precast of RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of cast iron cover. |
| 139 | M&L for making opening/hole suitable for fixing exhaust fan 300/450mm sweep including wooden bedding for fixing of exhaust fan and in wall built in cement mortar and making good the existing surface complete all as specified and directed. |
| 140 | Supply & Fixing M.S heavy dutyexhaust fan 240 V AC single phase complete with lovers and shutters 300 mm sweep including provision of flexible three core copper conductor cable of 23/0.0076 upto ceiling rose and grouting 04 Nos full threaded bolts and nuts etc complete all as specified and directed. |
| 141 | Supply & Fixing M.S heavy dutyexhaust fan 240 V AC single phase complete with lovers and shutters 450 mm sweep including provision of flexible three core copper conductor cable of 23/0.0076 upto ceiling rose and grouting 04 Nos full threaded bolts and nutscomplete all as specified and directed. |
| 142 | Repair of electric fan (Any make, type & sweep) with replacement of copper winding, Bearing ,Capacitor ,canopy ,Flexible wire to make electric fan fully functioning including oiling,greasing andtesting of fan complete all as specified and as directed for the following :- |
| 143 | Ceiling fan (any make, type & sweep) |
| 144 | Exhaust fan (any make, type & sweep) |
| 145 | Dismantelling of existing Fan from siteand Refixing/hanging of ceiling fan/exhaust fan of any sweep complete all as specified and directed. |
| 146 | M&L for Painting of ceiling fans any sweep complete, in situ with one coat of synthetic enamel paint by spraying including filling cavities with filler, cleaning all dust etc complete all as specified and directed. |
| 147 | All as per item No 141 Above But Exhaust fans of any sweep |
| 148 | S&F in replacement LED Batten Tube Light light fittings20 Watt INVERTOR RECHARGABLE and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulatedcomplete all as specified and directed. |
| 149 | S&Fin replacement LED Batten Tube Light light fittings20 Watt With LED batten motion sensor Light having Input voltage AC90 -300 V and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulatedcomplete all as specified and directed. |
| 150 | Taking down carefully water geyser/solar geyserany capacity,cable sealing end and dismantling of heating element, thermostat etc and refixing after repairs, connecting up and testing for satisfactory heating of water complete all as specified and as directed.Note :- Spare parts shall be measured and paid serparately as supply only. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
