Military Engineer Services-MES has published Tender For Repair/Replacement Of Rising And Distribution Water Supply Lines, Control Valves , Cleaning Of Oh Tank And Ug Sump Alongwith Connected Items At Rakhmuthi Under Ge (S) Akhnoor (Second Call).. Submission Date for this Tender is 16-03-2024. Control Valves Tenders in Jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-03-2024 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50mtr in depth; not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in any type of soil, for laying pipe line etc, complete all as specified and as directed by Engineer-In-Charge. Note :-The quoted rate shall be deemed to have included necessary "trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete complete including necessary all tools, tackles etc. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed by Engineer-In-Charge. |
| 3 | Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge. |
| 4 | Replacement old un-serviceable Sluice Valve with new Sluice Valve, cast iron, Class PN 1.6, size 200mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, complete all as specified and as directed by Engineer-In-Charge. |
| 5 | Description all as per serial item No- 4.00 here-in-before but for 150mm bore pipe. |
| 6 | Description all as per serial item No- 4.00 here-in-before but for 100mm bore pipe. |
| 7 | Description all as per serial item No- 4.00 here-in-before but for 80mm bore pipe. |
| 8 | Description all as per serial item No- 4.00 here-in-before but for 80mm bore pipe. |
| 9 | Replacement old un-serviceable Non ReturnValve with new Non Return Sluice Valve, Class PN 1.6, size 200mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified and as directed by Engineer-In-Charge. |
| 10 | Replacement old un-serviceable Non Return Valve with new Non Return Sluice Valve, Class PN 1.6, size 150mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified and as directed by Engineer-In-Charge. |
| 11 | Replacement old un-serviceable Non Return Valve with new Non Return Sluice Valve, Class PN 1.6, size 100mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified and as directed by Engineer-In-Charge. |
| 12 | Replacement for column pipe 80 mm bore heavy duty ISI marked conforming to IS-1239 and having length ofcolumn pipe 3.0 metreboth end flanged , complete all as directed by Engr-in Charge . Make- Tata/Jindal/Swastik |
| 13 | Construction of brick masonry valve pit of size 1200x1200x1200mm (internal dimensions of chamber) including plain cement concrete, M-7.5 (1:4:8), type-D2 (using 40mm graded crushed stone aggregates) 100mm thick, as in sub baseand PCC M-15 (1:2:4), type-B2 (using 40mm graded crushed stone aggregates) 100mm thick, as in flooring, brick work masonry, 23cm thick in cement mortar 1:4, rendering 15mm thick in cement mortar 1:4 on internal and external surfaces with two coat of lime wash, mild steel framed work as in valve pit covers with angle iron frame 50x50x6mm and including mild steel sheet cover 3.15mm thick complete, drilling/ welding for fixing of steel sheeting with mild steel hinges, handles and suitable locking arrangements, fastening arrangements for fixing, nuts, bolts and washers including painting with two coats of synthetic enamel paint over a coat of red oxide primer, including excavation in any type of soil, returning filling in external areas and removal the surplus soil to a distance of not exceeding 50mtrs, complete all as specified and as directed by Engineer-In-Charge. |
| 14 | Taking up unserviceable cast iron/ galvanised iron/ ductile iron water mains (including all fittings) of 100mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge. |
| 15 | Taking up unserviceable cast iron/ galvanised iron/ ductile iron water mains (including all fittings) of 80mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge. |
| 16 | Supplying, laying and jointing,testing, commissioning of of 100mm bore dia of K-7 class DI( Ductile Iron) Pipes as per IS 8329 along with cement mortar lining as per specification with rubber gaskets for flexible joints with regular ISI marked, Hydraulic testing as per specifications to specified pressure in stretches of length using pumps which should be able to provide specified test pressure, pressure gauges and other necessary equipment, labour, operation charges etc., required for testing and as per manufacturere"r instructionscomplete as per detailed specifications , complete all as specified and directed by Engineer-In-Charge. |
| 17 | Supplying, laying and jointing,testing, commissioning of of 80mm bore dia of K-7 class DI( Ductile Iron) Pipes as per IS 8329 along with cement mortar lining as per specification with rubber gaskets for flexible joints with regular ISI marked, Hydraulic testing as per specifications to specified pressure in stretches of length using pumps which should be able to provide specified test pressure, pressure gauges and other necessary equipment, labour, operation charges etc., required for testing and as per manufacturere"r instructionscomplete as per detailed specifications , complete all as specified and directed by Engineer-In-Charge. |
| 18 | Taking up or down galvanised steel tubing of 15mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge. |
| 19 | Taking up or down galvanised steel tubing of 20mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge. |
| 20 | Taking up or down galvanised steel tubing of 25mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge. |
| 21 | Taking up or down galvanised steel tubing of 40mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge. |
| 22 | Taking up or down galvanised steel tubing of 50mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge. |
| 23 | Tubes, "medium grade" galvanised, 15mm bore, ISI markedincluding all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or fixed on walls, complete all as specified and as directed by Engineer-In-Charge. |
| 24 | Tubes, "medium grade" galvanised, 20mm bore, ISI markedincluding all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or fixed on walls, complete all as specified and as directed by Engineer-In-Charge. |
| 25 | Tubes, "medium grade" galvanised, 25mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or fixed on walls, complete all as specified and as directed by Engineer-In-Charge. |
| 26 | Tubes, "medium grade" galvanised, 40mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches, complete all as specified and as directed by Engineer-In-Charge. |
| 27 | Tubes, "medium grade" galvanised, 50mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches, complete all as specified and as directed by Engineer-In-Charge. |
| 28 | Cast/Ductile iron fititngs bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, size upto 200mm bore, complete all as specified and directed by Engineer-In-Charge. |
| 29 | Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 15mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge. |
| 30 | Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge. |
| 31 | Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge. |
| 32 | Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 40mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge. |
| 33 | Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 50mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge. |
| 34 | Run lead joint, suitable for cast iron pipes and fittings of 100mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. |
| 35 | Run lead joint, suitable for cast iron pipes and fittings of 80mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. |
| 36 | Cleaning of overhead water tank, capacity 50,000 Gallons, height/ staging 18.85mtrs, by scraping with mild steel wire brush and removing all the silt, dirt, algae, sludge etc from the surfaces of walls and floor including removal the same to a distance not less than 50mtrs, washing the cleaned surface with bleaching powder solution thoroughly and applying two coats of lime wash on internal surfaces of reservoir, also applying two coats of cement paint of external surfaces of tank with staging after preparation of surfaces, and writing the particulars such as capacity of tank, date/ due date of tank cleaning in bold letters, on table size not less than 60cmx40cm, painted with black and white synthetic enamel paint on external surface, including painting with one coat black synthetic enamel paint to external surfaces of flow pipes with valves any type as connected with overhead water tank and making flow signs with white synthetic enamel paint, complete all as specified and directed by Engineer-In-Charge. Note: Necessary arrangements of saftey harnesses, scaffoldings, staging and other saftey measures for repair work at height or depth shall be adopted as directed by Engr-in-Charge without any extra cost to the Deptt. |
| 37 | Cleaning of overhead water tank, capacity 1,00,000 Gallons, height/ staging 18.85mtrs, by scraping with mild steel wire brush and removing all the silt, dirt, algae, sludge etc from the surfaces of walls and floor including removal the same to a distance not less than 50mtrs, washing the cleaned surface with bleaching powder solution thoroughly and applying two coats of lime wash on internal surfaces of reservoir, also applying two coats of cement paint of external surfaces of tank with staging after preparation of surfaces, and writing the particulars such as capacity of tank, date/ due date of tank cleaning in bold letters, on table size not less than 60cmx40cm, painted with black and white synthetic enamel paint on external surface, including painting with one coat black synthetic enamel paint to external surfaces of flow pipes with valves any type as connected with overhead water tank and making flow signs with white synthetic enamel paint, complete all as specified and directed by Engineer-In-Charge. Note: Necessary arrangements of saftey harnesses, scaffoldings, staging and other saftey measures for repair work at height or depth shall be adopted as directed by Engr-in-Charge without any extra cost to the Deptt. |
| 38 | Cleaning of under Ground Sump/reservoir of size 6.0 mtr dia and 7.50 mtr depth at Pump House under Rakhmuthi Garriosn within AOR of AGE E/M, by disconnecting all electric connections from LT panel, starter, removing pipe line from discharge side, taking out submersible/ centrifugal pump with motor alongwith column pipe by mechanical or manual method, scraping all mud, algae, silt, sludge and other dirts by mild steel wire brush floor and including remval the same to a distance not less than 50 mtr and re-assembling/ lowering doen submersible/ centrifugal pump with motor, column pipe and making all electric and water supply connection to the existing system, also applying two coats of cement base paint of external surfaces of tank with staging after preparation of surfaces, including writing the particulars such as capacity of tank, date, due date of tank cleaning in existing letter sizes, on table size not less than 60x40 cm painted with black and white synthetic enamel paint on external surfaces, complete all as directed. Note: Necessary arrangements of saftey harnesses, scaffoldings, staging and other saftey measures for repair work at height or depth shall be adopted as directed by Engr-in-Charge without any extra cost to the Deptt. |
| 39 | Collection of water from Rakhmuthi Pump House No:- 01 & No:- 02 , Mandiwala pump house and Jourian Pump House, Khour Pump House, Hamirpur Pump Houseto carry out the following water tests from Indian Institute of Integrative Medicine, Jammu or any other reputed / recognized Institute:- 1:- Heavy metals and Minerals parameters of water: (a) Iron as "Fe" (b) Manganese as "Mn" (c) Zinc as "Zn" 2:- Physical parameters of water: (a) Alkalinity (b) Calcium (c) Chloride (d) Magnesium (e) Oil and Greese (f) pH value (g) Total Suspended Solids (h) Total Hardness (j) Total Dissolved Solids (k) Turbidity Note : Result sheet of above tests shall be submitted in Duplicate to the entire satsifaction of GE. |
| 40 | Amount of Schedule of credit of for Rs 1,19,955.00 shall be deducted from quoted amount. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
