Military Engineer Services-MES has published Tender For Additional/Alternator To Bldg No. Np-37, Np-39 And Np-80 At Mil Stn Suranussi Under Age (I) Suranussi Please Refer Tender Documents.. Submission Date for this Tender is 27-03-2024. Mobile Generator Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Mar-2024 | Corrigendum No 1 | BOQ | 20-03-2024 |
| 2 | 20-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-03-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortarincluding all quoins arches etc all as specified and directed. |
| 2 | Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level all as specified and directed. |
| 3 | Taking down cement or cement lime plaster incl raking out joints hacking for keys srubbing down with water etc all as specified and directed. |
| 4 | Taking down chowkats or frames with Shutters( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site all as specified and directed. |
| 5 | All as perItem No 4 above but area exc 1.50 Sqm but n.exc 4.00 Sqm all as specified and directed. |
| 6 | Taking shutter only of any desription of sizen. exc 1 sqm all as specified and directed. |
| 7 | Taking shutter only of any desription of size exc 1 sqm and n.exc 2sqm all as specified and directed. |
| 8 | Ditto all as per item No 07 above but refixing in the same opening all as specified and directed. |
| 9 | M&L brick work , with sub class "B" bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius all as specified and directed. |
| 10 | ditto all as per item No. 09 above Except bricks only all as specified and directed. |
| 11 | M&L 15mm thick cement plastering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified. |
| 12 | M&L for 15 mm thick cement plastering in cement mortar (1:4) on other than faces of brick work surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified. |
| 13 | M&l for 5 mm th rendering in cement mortar in (1:3) on ceiling complete all as specified and directed. |
| 14 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) all as specified. |
| 15 | S&F 30mm thick flush shutter solid core constructionwith block board core and decorative face panels veneer with lipping/frame to match on both faces complete all as specified. |
| 16 | M&L for 35mm thickIInd class HW glazed /gauged shutters open rebatd and prepared to receive glass /gauge etc without sashbars edges of framing plain or chamferedr rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.24 (a) all as specified. |
| 17 | S&F solid PVC door frame of sie 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing |
| 18 | S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on eitherside& as gap insertfor top rail & bottom rail . Panellingof plain of plain colurPVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings |
| 19 | S&F anodised aluminium framepowder coated with minimum thickness of powder coating 50 micron for doors, windows, ventilatorswith one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. complete all as specified and directed. Note:- Prelaminated partical board and sheet glass/wiremesh shall be measured and paid for separately. Make:- INDAL/HINDALCO/JINDAL or equivalent as per IS. |
| 20 | S & F for Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) fixed type without sash bar,hook and eye closure Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 21 | S & F for Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,hook and eye closure,Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 22 | S & F 5.5 mm thick glass sheet ordinary quality glazing fixing in aluminium frame black or transparent in square n.exc0 .5sqm in each pane all as specified and directed by Engineer-in Charge |
| 23 | S & F 5.5 mm thick glass sheet ordinary quality glazing fixing in aluminium frame black or transparent in square exc0 .5sqm in each pane all as specified and directed by Engineer-in Charge |
| 24 | S&F 12 mm size of mesh of wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples all as specified and directed by Engineer-in Charge |
| 25 | S&F 300mm size aluminium sliding door bolt plate type stove enamelledblack with bright bolt not less than 12mm diaincl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified |
| 26 | S&F aluminium barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified |
| 27 | S&F 150 mm size aluminium pressed handle oval type stove enamelled black all as specified. |
| 28 | S&F 100 mm size aluminium pressed handle oval type stove enamelled black all as specified. |
| 29 | S&F 100 mm size mild steel butt hinges medium weight all as specified. |
| 30 | S&F 50 mm size mild steel butt hinges medium weight all as specified. |
| 31 | S&F floor door stopperaluminiumalloy body and tounge 140mm anodised with hard drawn steel spring etc all as specified. |
| 32 | S&F 300mm size aluminium rat rail rod pattern spring including roller and roller plate complete all as specified. |
| 33 | S&F in repair block board 19mm thickcommercial typeexterior gradefixed to timber frame work all as specified. |
| 34 | M & L 25 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination,including magnetic catcher and all kitchen cabinet accessories andfixed with screws with timber frame work all as specified. |
| 35 | S&Fgalvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm all as specified. |
| 36 | Ditto all as per item No 35 above but fixed in repair all as specified. |
| 37 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises all as specified. |
| 38 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick double charged, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match , over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed. |
| 39 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick double charged ,area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match , over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed. |
| 40 | M&L for glazedceramictiles coloured of size 450 mm x 350 mm x 7mm th on vertical surfaces such as in skirting, dado etc over 10 mm th backing coat in cm 1:4 complete all as specified and directed. |
| 41 | M&L 20-25 mm th machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm th screed or bedding layer in CM 1:6 complete all as specified and directed |
| 42 | M&L Granite (of any type) work (table rubbed and polished) 20 mm thickin steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed or bedding layer in CM 1:4 all as specified and directed by Engineer-in Charge |
| 43 | M&L for Roundingedges of granite stone slabs edge,in steps, cooking plattorm, and other similar situations all as specified. |
| 44 | S&F in repair vitreous china squatting pan ‘Orissa patten’ size 580x440mm white with intergral foot rest (excluding flushing cistern and flush pipe)with "P" or "S" trap including water connection to trap and flushing pipe, flushing cistern etc incl lime concrete bedding and PCC 1:2:4 for making good the floor fixed in repair complete all as specified and directed . |
| 45 | S & F in repair PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore, connection to WC pan & PVC connection 15mm size with PTMT nuts of length 300mm complete all as specified . |
| 46 | S&F Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts,screwed for iron pipe and fixed etc all as specified. |
| 47 | Supply and fix in repairsfor vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia cast coppar alloy pillar tap, swan neck chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed. |
| 48 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc all as specified and directed by engineer-in-charge |
| 49 | S&F in replacement 20 mm dia harrison rails mild steel with decorative finish , with fixing brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM) all as directed. |
| 50 | Dismantling brick tile or terracing tile single layer on roof all as specified and directed. |
| 51 | Demolition of mud in roofs ,any thickness incl plastering and leeping (weather full thickness removed or part there of)all as specified and directed. |
| 52 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided forall as specified and directed. |
| 53 | M/L for PCC 1:5:10 type E2 with using 40 mm graded stone aggrgate as infilling for sunken floorand like worksall as specified and directed. |
| 54 | Supply only Integral waterproofing compoundall as specified and directed. |
| 55 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfacesall as specified and directed. |
| 56 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified |
| 57 | M&L for 40mmaverage consolidated thickness PCC 1:2:4 type B1with using 20mm graded stone aggregate as in padding on flat roofs etc all as specified and directed. |
| 58 | M/L 40mm thick brick tiles laid on mud mortar and joints grouted flush incement mortar (1:3) mixed with 5% of crude oil by weight of cementand pointed flush in CM 1:3all as specified. |
| 59 | All as per item No 57 above but except tilesall as specified. |
| 60 | Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacityall as specified. |
| 61 | S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1. |
| 62 | S&F brass CP kitchen sink mixer for mixing Hot and Cold water 15 mm bore screwed down for iron pipe and complete all as specified. |
| 63 | Taking up/ down GI tubing and connections with all fittings 15 mm bore all as specified. |
| 64 | Ditto all as per item No 62above but 20mm bore all as specified. |
| 65 | S&F 15 mmdia GI tubingand connections fixed to wall or ceiling,laid in floor etc all as specified. |
| 66 | ditto all as per item No 64 above but fixing only all as specified. |
| 67 | S&F 20 mmdia GI tubingand connections fixed to wall or ceiling,laid in floor etc all as specified. |
| 68 | ditto all as per item No 66 above but fixing only all as specified. |
| 69 | S&F in repairCP shower rose 15mm sizefixed to iron pipe all as specified. |
| 70 | S&F pvc connection 15mm size with PTMT nuts of length 450mm all as specified. |
| 71 | S&F in repair 15mm CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified. |
| 72 | S&F in repair 15mm size brass stop valveswith crutch or butterfly handles high pressure screwed both endsfor iron pipe all as specified. |
| 73 | S&F in repair 20mm size stop valves PTMT high pressure screwed for iron pipe all as specified. |
| 74 | Ditto all as per item No 72 above but fancy type, chromium plated with long shank and cup (concealed type) all as specified. |
| 75 | S&F in repair towel rail 600mm long of PTMT incl cp brass srews etc all as specified. |
| 76 | M&L for aluminium framed work such as grill, grating etc with end of bars rivetted or screwed with stainless steeland rivetted etcall as specified & directed |
| 77 | M&L preparing new surfaces ofwalls and applying two coats of oil bound distemper over a coat of alkali primer etc all as specified |
| 78 | M&L for Complete removal of existing treatment of walls and applying a coat of oil bound distemper with putty over plastered surface to prepare the surface even and smooth all as specified. |
| 79 | M&L preparing surfaces of newwalls and applying two caots of cement base paint over and acoat of alkali primer all as specified. |
| 80 | M&L for Complete removal of existing treatment of walls and applying two coats of cement base paint over putty with colour scheme change etcall as specified. |
| 81 | M&L for three coats of white wash onon ceiling on newly plastered surfaces all as specified. |
| 82 | M&L for two coats of white wash onon ceiling on old plastered surfaces all as specified. |
| 83 | M&L for two coats synthetic enamel paint on new wooden surface over 10 cm width or girth over a coat pink primer all as specified. |
| 84 | Ditto all as per item No 82 above but one coat on old treated surface all as specified. |
| 85 | M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primerv etc all as specified |
| 86 | Ditto all as per item No 84 above but one coat on old treated surface etc all as specified |
| 87 | M/L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate ), asin roof kerbs or mud stops, rounded or chamfered on edges parapets copings, bed plates, etc all as specified. |
| 88 | M&L PCC 25mmth 1:2:4 type B-0using 12.5 mm graded stone agg as in levelling course all as specified. |
| 89 | M&L for 75 mm thPCC 1:3:6type C2 as in plinth protectionwith using 40mm graded stone aggregate etc all as specified. |
| 90 | S&F in repair PVC SWR pipe 110 mm dia single socketed in any length with rubber ring joints fixed to walls etc all as specified |
| 91 | Ditto all as per item No 89 above but laid in trenches all as specified. Note : - Excavation and earth work shall be marked and paid under respective items of BOQ. |
| 92 | Ditto all as per item No89 above but 75mm dia |
| 93 | Ditto all as per item No 91above but laid in trenches all as specified. Note : - Excavation and earth work shall be marked and paid under respective items of BOQ. |
| 94 | S&F in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified |
| 95 | S&F 110 mm dia PVC SWR type bends any radius complete all as specified |
| 96 | Ditto all as per item No 94 above but 75mm dia etc all as specified |
| 97 | S&f 100 mm dia stack clampmade out of25x4mmFlat iron etc all as specified |
| 98 | S&f 75mm dia stack clampmade out of25x4mmFlat iron etc all as specified |
| 99 | Cutting groovesof size 75mm wide and 65mm deep in brick parapet wall for inserting APP membrane and making good the disturbed portion in CM (1:3) etc all as specified |
| 100 | M&L for 50mm th PCC 1:2:4 type B1 as in flooring incl finishing the surface even and smooth without using extra cement etc all as specified |
| 101 | M&L for 200X200X 25mm th chequered cement concrete tiles coloured with grey cement andpigmentas in floor etc over 20mm th screedbed in CM 1:6 all as specified. |
| 102 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste pipe and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 103 | Form work to soffits of suspended slab such as roof slab,kitchen slabn exc200mm thick (horizontal/sloping/vertical) with fair finished surfacecomplete all as specified |
| 104 | M & LTMT bars6mm to 8mm dia. cut to length bent to shape required including cranking, bendingand binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified |
| 105 | Demolition of cement concrete is reinforced of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 106 | M&L Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (12.5mm graded aggregate) inslabs supported on walls, beams, columnsdeck slabs and in shelves, the like all as specified and directed by Engineer - in - Charge . |
| 107 | M & L Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (12.5mm graded aggregate) in Chajjas all as specified and directed by Engineer - in - Charge |
| 108 | Taking down carefully surface aluminium or copper point wiring onTW Batten/in conduit/ with PVC casing-caping/conduit(light, fan, socket, or power) complete and making good the disturbed surface of wall/celling etc including taking down fitting such asswitches, ceiling roses, pendants, regulators, sockets, light fittings etc and removing material from site aii as specified.complete. |
| 109 | M & L for concealed Point wiring complete with 1.5 Sqmm (nominal area)1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable in and including heavy duty PVC conduit not less than 20 mm(wall thickness 1.5 mm ) including fitting & accessories, with MS concealed terminal boxes with 3 mm thick laminated baklite (Hylum/Anchor) sheet top cover for mounting switch, socket etc for one light/fan/bell point controled by one switch and(Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm. solid copper conductor with green FR PVC insulating earth common earth dolly, complete all as specified. |
| 110 | All as per serial item No 108 above but for one socket outlet 6 amp controlled by one switch on the same board with other switches. |
| 111 | All as per serial item No 108 above but for one socket outlet 6 amp controlled by one switch on indepdendent board. |
| 112 | All as above item No 108 but Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified. |
| 113 | All as per Item No. 111 here-in-beforebut for one light point controlled by two, 2 way switches all as specified. |
| 114 | S & F switch piano flush button single pole one way 5/6 amp complete all as specified. |
| 115 | S & F switch piano flush button single pole one way 16 amp complete all as specified. |
| 116 | S & F of switch piano, flush type, 5 amps, 230 volts, single pole, two way (ISI marked) complete all as specified |
| 117 | S & F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified. |
| 118 | S & F socket outlet2 in 1, 3 pin16 amp flush type complete all as specified. |
| 119 | Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with single MCB 20 Amp 240 V all as specified. |
| 120 | M & L of lamp holder, PVC/ polycarbonate type with cord grip cap suitable for prndant fittings complete and including taking down unserviceable lamp holder of any description complete all as specified |
| 121 | Supply and fixing of LED lights fitting 1 x 20 W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complect as specified. |
| 122 | Supply and fixing of LED lights fitting mirror type with high output diffuser 2 feet, 10Watt 220 V AC decorative type with driver holder and LED lamp including connecting connecting up with three core flexible copper conductor cable of suitable sizecomplect all as specified. |
| 123 | S & F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified. |
| 124 | S & Felectronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting upcomplete all as specified. |
| 125 | S & F for MCB DB SPN 8 waydouble door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 126 | Supply and fixing sheet steel metal enclouser (DB) triple pole and neutral 4 way 415 V, with 200 amps rated bus bar complete aii as specified and directed. |
| 127 | Supply and fixing MCB"s single pole and neutral 32 Amps, 240 Volts,10 KA rapturing capacity "C" curve.complete all as specified & directed. |
| 128 | Supply and fixing MCB"s single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity "C" curve.complete all as specified & directed. |
| 129 | Supply and fixing 415 V , 10 KA "C" curve miniature circuit breaker (MCB"s) of capacity 63 Amps TPN. complete all as specified & directed. |
| 130 | S&F in repair of bell AC single pole Ding Dong type 230 volt all as specified. |
| 131 | S&F of bellpush flush type 5 Amps complete all as specified. |
| 132 | S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified. |
| 133 | M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) in existing concealed conduitcircuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in conduit including one run of PVC insulated multistrandedcopper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour completeall as specified and directed by Engr-In-Charge.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable shall be paid as one unit length) |
| 134 | M& L for painting of ceilingfan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc compete all as specified and directed . |
| 135 | Supply& fix exhaust fan, steel body AC single phase. 230V of size 300 mm sweep with, blades, and frame andlouvers all as specified. |
| 136 | Supply& fix exhaust fan, made of sturdy Engineering plastic complete with lovers shutter voltage 230V 50 HZ 1200 RPMcopper winding of size 250 mm sweep with, frame all as specified. |
| 137 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.all as per directed. |
| 138 | Earthing completewith galvanised steel earth plate electrode 60x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on complection., earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around includingtop and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregatewith 1 nos MS handles of 8mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2020) testing on completion complete all as specified. Note :- Incase desired results are not obtained, contractor has to provide now earthing without extract cost to Govt. payment for sucessful earthing shall only be made. |
| 139 | M&L opening for exhaust fan cuttings of holes in PCC or through bricks walls upto 250/300 mm dia making good in cement mortar 1:3 or cement concrete 1:2:4 type B2 as required making good the disturbed portion.all as specified and directed. |
| 140 | Supply ,laying and testing cable XLPE insulated ,screened ,PVC bedded ,galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium condutor of size 25 sq mm 4 core all as specifed. Note :- Excavation and earthwork , sand cushioning, cable covers shall be measured and paid under respective items of BOQ. |
| 141 | Excavation in trenches in Soft/disntegrated not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of GI pipe etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in Soft/loose of soil complete all as specified & directed by Engr-in-Charge. |
| 142 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soft/loose soil, all as specified & directed by Engr-in-Charge. |
| 143 | Removing excavated soil to a distance not exceeding 50 m and depositingwhere directed at a level not exceeding 1.5 mabove the starting point soft /loose soil all as directedby Engr-in-Charge. |
| 144 | M&L for sand cushioning to under ground cable using sand and gently punning to cushioning to cable complete all as directed by Enginner-in-charge (Punned down thickness of sand shall be considered for payment. |
| 145 | Supply and fix common burnt clay building brick Sub class B designation 75 all as specified and directed. |
| 146 | S&F repair ,40 mm bore GI tubing "light garde "in treches on pole for protection of cables complete all as specified & directed by Enginner-in Charge . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
