Urban Development Department-UDD has published Drilling Of 200Mm Dia X 150Mm Dia X 240Mts. (Av.) Depth High-Yeild Drilled Tube Well (H.Y.D.T.), Distribution Of Pipe Line,Pumping Units,Construction Of Pump House (9’0”X7’0”) Size For Water Supply Scheme Of Sido Kanhu Murmu Parkat West Side Of Bus Standw. Submission Date for this Tender is 29-02-2024. Pump House Construction Tenders in pakur Jharkhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | E/W in excavation in foundation trenches in Hard soil (vide classification of soil – A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts leveling ramming the foundation trenches removing roots of tree shrubs all complete as per specification and direction of E/I. |
2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not to exceeding 150mm thick with all leads and lift including cost of all materials labour royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
3 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
4 | Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixerand placing in position vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I. |
5 | Providing R.C.C. M-200 in Beam/band with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixerand placing in position vibrating striking curing ( but excluding the costof reinforcement) taxes and royalty all complete as per building specification and direction of E/I. |
6 | Providing R.C.C.-200 with nominal mix of (1:1.5:3) inColumn with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixerand placing in position vibrating striking curing ( but excluding the costof reinforcement) taxes and royalty all complete as per building specification and direction of E/I. |
7 | Providing designation 75B B/W in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I. |
8 | Providing designation 75B B/W in C.M.(1:6) in Super Structurewith approved quality of clean coarse sand of F.M.2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I. |
9 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in Lintelwith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixerand placing in position vibrating striking curing ( but excluding the costof reinforcement) taxes and royalty all complete as per building specification and direction of E/I. |
10 | Providing 63mm thick R.C.C.(M – 150) with nominal mix (1:1.5:3) shelves with approved quality of stone ……..do….. all as per direction of E/I |
11 | Providing R.C.C M-200 with nominal mix of (1:1.5:3) inRoof Slabwith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixerand placing in position vibrating striking curing ( but excluding the costof reinforcement) taxes and royalty all complete as per building specification and direction of E/I. |
12 | Providing 19 mm. thick water proof cement plaster (1:3)--------do---------all complete as per specification and direction of E/I. |
13 | Providing reinforcement (Tor steel) 8mm.,10mm,12mm dia bars cutting bending and binding with annealed wire with cost of wire , removal of ruts , placing the rods in position as per approved design and drawing all complete as per specification and direction of E/I |
14 | Supplying, fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S angle frame of size 60 x 60 x 6 mm. including cost of fabrication providing necessary locking arrangements with haskal and dommy duly fixed in C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
15 | Supplying, fitting and fixing M.S grill made of 20 x 6mm. M.S. flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.) |
16 | Supplying, fitting and fixing 16mm. dia M.S. rodfor fan hook as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.) |
17 | Providing 6 mm. cement plaster (1:4) in ceiling with clean coarse sand of F.M. of 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
18 | Providing 12mm. cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
19 | Providing 12mm cement plaster (1:4) with 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. |
20 | Providing 25mm. thick first class patent stone flooring (1:2:4) with stone chips, in two layers, bottom layer 19mm. thick (1:2:4) with 12mm. to 6mm. size graded stone chips and top layer 6mm. thick (1:2) with 6mm. down stone chips in panels, including cost of curing, finishing the surface smooth by rubbing with carborundum stone , taxes and royalty all complete as per building specification. |
21 | Providing centering& shuttering including strutting, propping etc. & removal of form..do….do…. as per building specification and direction of E/I. foundation |
22 | column |
23 | linten/band/beam |
24 | roof/ chhajja |
25 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper. scaffolding. curing and taxes all complete as per building specification and direction of E/I. |
26 | Providing primer coat of red lead paint of approved make over new still surface including preparing the surface after cleaning removing rust, dirt scales, smokes, grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building |
27 | Add carraige of materials |
28 | Add cost of electrification |
29 | Cost of drilling 200mmx165mm x240.00meter (Avg.) deep bore well in all kinds of soil and rock in rural or other area for installation of pump set with Hydraulics DTH rig machine all complete including supplying all materials, tools, drilling rig, air compressor and equipment as well as fuel, lubricants and cost of transporting charge of rig machine and other vehicle up to site of the work etc. all complete. upto 50m depth below GL |
30 | beyond 50m to 240m |
31 | Supplying all tools, tackles & lowering of 200mm dia MS ERW Casing pipe (3mt to 6 mt.) of 6mm wall thickness including welding charges, cost of pipe etc. including all taxes, VAT excise duty freight charges with inspection charge etc. as applicable all complete job. |
32 | Supplying all materials tools & equipments for fitting & fixing the following materials in position of loweringcasing pipe complete job. |
33 | Supplying all labour, tools & equipments for development of tube well by suitable capacity of air compressor machine including the cost of measurement of discharge of tube well with ‘V’ notch and carriage of compressor & its accessories etc. all complete as per direction & specification. |
34 | Making temporary arrangement of water during drilling operation including all materials labours and hire charges . |
35 | E/Work in excavation for laying of different sizes of pipe so as to give one meter average cover over the socket of pipe with disposal excavated earth within initial lead and lift as per specification and dirn. of E/I. |
36 | Supplying tools and cutting road as well restoring the same as per specification and dirn. of E/I. (a) pucca road (except black top only taken out materials to be used) . |
37 | Laying of G.I. Pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes to sizes and threading ends where necessary etc. all complete as per specification and dirn. of E/I. 32mm dia |
38 | 40mm dia |
39 | 50mm |
40 | Supplyinglabour andtools for fixing G.I. pipes with red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including suppling and fitting all complete as per specification and dirn.of E/I. 32 mm |
41 | 40mm dia |
42 | 50mm |
43 | Providing and fixing brass/ C.I. Stop cock of approved quality all complete as per specification and dirn of E/I. 40mm |
44 | 50mm |
45 | Providing and fixing G.M. non-return valve Horizontal/vertical type of approved quality as per specification and dirn of E/I. 40mm |
46 | Supplying and fixing G.I. fittings of approved make all complete as per specification and dirn of E/I. |
47 | Makingbend and offset in G.I. pipe as per specification and dirn. of E/I. 32mm |
48 | 40mm dia |
49 | 50mm dia |
50 | Supplying materials and construction single mounted R.C.C. (1:2:4) stand posts as per approved design. Drawing and specification including supplying and fixing 15mm dia brass bib cock of approved make and weight not less than 350gms and 2 meter of 15mm dia G.I. pipe as per specification and dirn of E/I. |
51 | Supplying G.I. pipe (ISI mark & medium). 32mm |
52 | Supplying G.I. pipe (ISI mark & medium). 40mm |
53 | 50mm |
54 | Providing P.C.C (M-200) in foundation & wall with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand ofF.M 2.5 to 3 including screening mixing cement concretein mixer and placing in position vibrating curing taxes and royalty all complete as per building specification and direction of E/I. |
55 | Earth work in back filling the trenches after laying different types & size of pipes with removed during excavation within within initial lead and lift as per specification and dirn. of E/I. |
56 | Add carriage of materials |
57 | Supplying submersible pump sets conferming to IS 8034 and motor conferming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ nory impeller. Motor suitable for working on 415v+ 10%, 3ph.,50hz AC supply with cable guard thrust carban/ fiber bearingto withstand entire hydraulic thrust. Water proof winding shall be provided .The pump setshall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump |
58 | Supplying Fully automatic star delta starter to operate induction motor working on 415v+ 10%, 3ph.,50hz with no volt coil. Over load eliment ON-OFF push buttons with necessary materials and connected to supply, etc complete starter with original sheet steel enciosef as per IS : 3914 |
59 | Supplying XLPE / PVC insulated, unarmoured cable 1100 V grade with ISI mark three core, solid / stranded copper conductor with 6mm thick 25mm width M.S. spacer with G.I. Earth wire 6sq mm, complete in an approved manner as per IS : 7098 |
60 | Providing & Supplying in standard lengths HDPE Pipe confirming to IS 4984-4984/14151/12786/13488 (Latest Revision with necessary jointing materials like mechanical connector i.e. thread/insert joint/ quick release coupler joint/compression fitting joint or flanged joints excluding coupler/specials and taxes)… 50mm. dia. |
61 | Providing & Supplying G.I. hanging wire ……do………do…..as per specification and dirn of E/I. |
62 | Supplying and fixing G.I. socket of approved make all complete as per specification and dirn of E/I. |
63 | Supplying (63amp.) switch disconnector ……do………do…..as per specification and dirn of E/I. |
64 | S/L/tools & labour charge for laying / lowering (50mm. dia.) p.v.c. pipe ……do………do…..as per specification and dirn of E/I. |
65 | Add cost of labour charge for installation of submersible pump motor, panel board etc. |
66 | Supplying all materials & tools for earth work in excavation in 3meter depth, sodium chloride, wooden charcoal, copper wirecfor earthing……do………do…..as per specification and dirn of E/I. |
67 | Providing electric connection from nearest pole by 7/20 pvc. Covered copper wire as per JSEB rule complete job with sign board and photography |
68 | Add cost of gst @18% |
69 | Add cost of labours cess @1% with sign and photography |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail