Supply And Erection Of Distillation Cooling Tower , Technical Specification For The Supply And Erection Of Distillation Cooling Tower Cooling Tower Performance Details:Water Flow Rate:300 M3/Hr, Water Inlet Temperature:42ºc,Water Outlet Temperature:32ºc,Delta T (Temperature Difference):10ºc,Wet Bulb Temperature:29ºc,Approach:3ºc,Heat Exchanged (Kw):3489 Kw,Cooling Capacity:30,00, 540 Kcal/Hr,Cooling Tower Construction Details:Cooling Tower Type:Induced Draught, Cross Flow Type,Overall Size (L X W X H):Length : 5070 Mm,Height At Fan Deck Level 7060 Mm,Height At Basin Level : 5450 Mm,No Of Cell:2 Nos, Cooling Fan Detils:Fan Type:Axial Flow, Fan Size (Fan Diameter):1524 Mm, No Of Leaf/Blades:6 Nos,Fan Rotating Speed:720 Rpm,No Of Fan:2 Nos,Material Of Blades:Pvc,Material Of Hub:Aluminum /Cast Iron/Pvc,Fan Shaft:En-8,Type Of Balancing:Dynamically Balanced, Type Of Drive:Direct Drive (Fan Driven By Motor), Cooling Tower Fan Motor Details:Motor Input Power:7.5 Hp,Operating Voltage:415 V/50 Hz/3 Ph,Rotation Speed:720 Rpm, No Of Motor:2 Nos,Mounting:B5 Flanged Mounted,Enclosure:Totally Enclosed Non Ventilated (Tenv) Tefc,Insulation Class:Class F With Temp. Rise Limited To Class B ,Ambient Temperature:45ºc,Motor Protection:Ip55,Efficiency Class:Ie2,Motor Make:Kirloskar/Siemens/Crompton Greaves/Abb,Material Of Packing:Material Of Packing:Splash Bar,Splash Bar Type:V Type Bar,Material:Pvc,Color:Grey/White,Water Distribution System:Water Distribution Type:Gravity Feed Nozzle System Type,Nozzle Type:Polypropylene,Hot Water Distribution Piping Material:Frp/Marine Plywood,Hot Water Inlet Size:6”,Cold Water Outlet Size:As Per Mill Requirement,Drainage Nipple:1”/1”,Overflow Size/Makeup Size:Overflow Size/Makeup Size 1”/1”Structure Material:Casing (Side Covers)/Fan Desk Frp/Frp, Motor Frame/Fills Support/Fan Guard Hot Dip Galvanized Steel,Other Structure Material/Frame Work:Hot Dip Galvanized, Material Of Bolt & Nut:Hot Dip Galvanized,Drain Float Valve, Over Flow Line :Material : Pvc
