Military Engineer Services-MES has published Tender For Additional / Alternator / Improvement To Certain Works And Provn Of Pol Store At Af Stn Baroda. Submission Date for this Tender is 04-04-2024. Mobile Generator Tenders in baroda Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Mar-2024 | Corrigendum | Date | 28-03-2024 |
| 2 | 15-Mar-2024 | BOQ CORRIGENDUM | BOQ | 28-03-2024 |
| 3 | 28-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-04-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. complete all as specified and directed by Engr-in-Charge |
| 3 | Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but exceeding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge |
| 4 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified |
| 5 | Taking down chowkats or frames (without taking of shutter from the frame) not exc. 1.5 Sqm eachcomplete all as specified and directed by engr -in-charge |
| 6 | Taking down chowkats or frames (without taking of shutter from the frame) exc. 1.5 sqm eachand not exc 4 sqm each complete all as specified and directed by Engr -in-Charge |
| 7 | Dismantling fencing wire mesh, any type complete all as specified |
| 8 | M&L Surface dressing n exc 15 cm deep complete all as specified and directed |
| 9 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep and getting out in loose/softsoil complete all as specified |
| 10 | Excavating in trenches n. exc 1.5 mtr wide & exc 1.5 mtr and not exc 3 mtr in depth for foundation etc and getting out in in loose/softsoil complete all as specified. |
| 11 | Returning , filling in, including spreading levelling, watering and well ramming in layers n.exc 25cm in soil complete all as specified |
| 12 | M&L Excavation of post holes (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified |
| 13 | M & L Sand filling under floors or in foundation including watering and consolidation as in bedding layers for laying tiles complete all as specified. |
| 14 | Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting points in soil complete all as specified |
| 15 | M&L Hardcore of broken stone or boulder of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified. |
| 16 | M&L Moorum filling in floors or pavings, laid in layers n.exc 15 cm thick spread, levelled and blinded with earth and rammed including watering complete all as specified |
| 17 | M&L Spreading and levelling of fine good sand free stone / pebbles and mixed with wood saw dust powder (obtained from outside MOD) including removing from existing sand complete all as specified |
| 18 | M & L PCC 1:4:8 type D 2 using 40 mm .graded stoneaggregate in foundation complete all as specified |
| 19 | M&L PCC 1:3:6type C-2 using 40mm stone aggregate as in foundation to fencing post complete all as specified |
| 20 | M & L PCC 1:3:6 type C1 using 20 mm graded aggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edgescomplete all as specified |
| 21 | M&L PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in copings of parapet wall includingnecessary form work complete all as specified |
| 22 | M&L PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in copings of parapet wall includingnecessary form work complete all as specified |
| 23 | M&L Precast cement concrete louvers and jallies, 25mm thick Type B0 1:2:4 using12.5mm graded aggregateincluding fixing in cement mortar 1:4 complete all as specified |
| 24 | M&L RCC 1:1½ :3 type A-1 (Nominal Mix) using 20mm graded aggregate asin foundation including raft footing, foundation beams, plinth beams, bases of columns etc complete all as specified |
| 25 | M&L RCC 1:1½ :3 type A-1 (Nominal Mix) using 20mm graded aggregate as in columns complete all as specified |
| 26 | M&L RCC 1:1½ :3 type A-1 (Nominal Mix) using 20mm graded aggregate as in beam, cantilevers, lintels etc and the like complete all as specified |
| 27 | M&L RCC 1:1½ :3 type A-1 (Nominal Mix) using 20mm graded aggregate as in chajjascomplete all as specified |
| 28 | M&L RCC 1:1½ :3 type A-1 (Nominal Mix) using 20mm graded aggregate as in slab supported on walls complete all as specified. |
| 29 | M&L Brick work in sub class B bricks straight or curve on plan exceeding 6 mtr mean radius built in CM1:4complete all as specified |
| 30 | M&L Brick work in sub class B bricks straight or curve on plan exceeding 6 mtr mean radius built in CM1:6complete all as specified |
| 31 | M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; andcutting chases for concealed water tubing etc., and making good, cutting notexc 10 cm girth complete all as specified |
| 32 | M&L Use & waste of form work for rough finished flat surfaces to sides of concrete of foundation, footings, bases of columns and similar work vertical or to batter complete all as specified. |
| 33 | M&L Use & waste of form work for rough finished flat surfaces of concrete in chajja/shelves complete all as specified. |
| 34 | M&L Use & waste of form work for rough finished flat surfaces of concrete in beams, lintels including support etc complete all as specified. |
| 35 | M&L Use & waste of form work for rough finished flat surfaces of concrete to sides of pillars post, struts piers, columns and stanchions etc complete all as specified.. |
| 36 | M&L Use & waste of form work for edges of concrete flats, treads, breaks floors, window cills, opening in concrete walls, floor, roofs, n exc 20cm wide and side of RCC, PCC bands in walls horizontal or sloping and similar works exc 10cm but nexc 20cm wide complete all as specified.. |
| 37 | S&F 2nd class hardwoodplain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified |
| 38 | S&F 30 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified |
| 39 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 40 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C channel having a PVC sheet strip of 20mm width shirk inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification complete all as specified |
| 41 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, as per specification complete all as specified |
| 42 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section and fixedcomplete all as specified |
| 43 | S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixedcomplete as in repairs all as specified |
| 44 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed allcomplete all as specified |
| 45 | S&F300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete as in repairs allas specified |
| 46 | S&F 100mm Butt hinges medium weight, cold rolled mild steel complete as in repairs all as specified |
| 47 | S&F 100mm Butt hinges medium weight, cold rolled mild steel complete all as specified |
| 48 | S&F 150mmanodised aluminium handle cast type complete all as specified |
| 49 | S&F 150mmanodised aluminium handle cast type complete as in repairsall as specified |
| 50 | S&F Continuous piano hinges mild steel bright finish or electro galvanised for 30mm thickness complete as in repairs all as specified. |
| 51 | S&FTubular towel rail, 20mm dia, D type, 60cm long between flangescomplete as in repairsall as specified |
| 52 | S&F140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified |
| 53 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples or aluminium beads complete all as specified |
| 54 | M&L Mild steel posts and struts in fencing including cutting top to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc., and confirming to Fe-290 Gde E-165 complete all as specified |
| 55 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including spindle hinges, stops, MS sliding bolts etcincluding ornamental and intricate design conforming to Fe.290.Gde-E-165 complete all as specified |
| 56 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and spindle hinges large hasps and staples; chains; MS sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 Complete all as specified and as directed |
| 57 | S&F Mild steel screw bolts of dia 5mm to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm longcomplete all as specified |
| 58 | M&L Mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitred angles etc as required complete all as specified. |
| 59 | M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns,hooping ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified |
| 60 | M&L TMT bars 6mm to 8 mm dia and over cut to length bent to shape required includingcranking, bending spirally for hoping for columns, hooping ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified |
| 61 | M&L TMT bars5mm dia and over up to and including 10mm dia in stirrups, spacers and binders binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified complete all as specified |
| 62 | M&LFramed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified. |
| 63 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified |
| 64 | Supply only MS galvanised chain link fence, any size or type |
| 65 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified |
| 66 | S&F 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work such as door shutters etc completeas in repairs all as specified |
| 67 | S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcompleteas in repairs all as specified |
| 68 | M&L Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over and including 10mm thick screed bed in CM 1:4 completeall as specified |
| 69 | M&LMachine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishingover and including 10mm thick screed bed in CM 1:4 complete all as specified |
| 70 | M&L Grinding and mirror polishing of old surface of kota stone and matching with existing or new surface complete all as specified |
| 71 | M&L 75 mm thick cement concrete type B2 1:2:4 ( 40 mm graded aggregate) in floors etc complete all as specified |
| 72 | M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection , finished surfaces even and smooth without using extra cement, complete all as specified |
| 73 | M&L 75mm thick PCC 1:4:8, type D-2 as in sub base for pavement, path, floor etc complete all as specified. |
| 74 | M&L25mm thick cement concrete type B0 1:2:4 using 12.5mm graded aggregate in floors complete all as specified |
| 75 | M&L Applying cold bituminous primer @ 0.30 Ltr/sqm conforming to IS 3384 and laying APP polymer modified fibre glass reinforced membrane 3mm thick 3.5Kg/sqm (modified bituminous water proofing membrane) with plain finish with polyester base reinforcement sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane by torching the same all as per manufacturer instruction including one coat of bituminousaluminium paint @ 0.10 Ltr/sqm over membranecomplete all as specified. |
| 76 | M&L 0.63mm thickMild steelplain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitred angles etc complete all as specified |
| 77 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment (as in road berm), complete all as specified |
| 78 | M&L 10 mm thick rendering on fair faces of concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified |
| 79 | M&L 10 mm thick rendering on fair faces of concrete surfaces in CM 1:4 as backing coat for tiles on vertical surfaces without using extra cement complete all as specified |
| 80 | M&L5 mm thick rendering in CM 1:3 mixed with water proofing compound @ 3% by weight of cement on ceiling complete all as specified |
| 81 | M&L Rendering 15mm thick in two layers, first coat 10mm thick in CM 1:4 and second coat 5mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on concrete block masonry surfaces finished even and smooth without using extra cement as specified. |
| 82 | M&L Rendering in two layers i.e CM 1:6, 10mm thick as first layers and CM 1:4, 5mm thick as 2nd layer with reckon fibres along with chicken wire mesh on stone/brick masonry surfaces or surfaces other than fair face of brick or on concrete surfaces finished even and smooth without using extra cement complete all as specified |
| 83 | M&L Screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finished complete all as specified |
| 84 | M&L Screed bed or bedding layer of cement mortar 1:4, 15mm thickfor laying floor mixed with water proofing compound @ 3% by weight of cement on concrete block masonry surfaces finished even and smooth without using extra cement complete all as specified |
| 85 | M&L GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified. |
| 86 | M&L Preparing new surfaces plastered or un plastered & applying three coats of white wash on undecorated wall surfaces and ceiling surface complete all as specified |
| 87 | M&L Preparation of new plastered surfaces of wallapplyingtwo coat of oil bound distemperoverone coat of alkali resistant paint & including 1mm thick wall careputty on wall completedall as specified |
| 88 | M&L Preparation of new plastered surfacesandapplying two coat of cement based paint over acoat of primer with alkali resistant priming coat complete all as specified |
| 89 | M&L Preparation of new plastered surfaces on wall/concrete surfaces and apply two coat of cement base paint camouflage pattern as approved by GE up to 4 floor high complete all as specified |
| 90 | M&L Preparation on the existing surfaceson wall/concrete surfaces thoroughly, washing rubbing down in the water, cleaning upto the entire satisfaction of the Engineer-in-Charge and apply one coat of cement base paint camouflage pattern, camouflage pattern as approved by GE, up to 4 floor high complete all as specified |
| 91 | S&F 4mm thick Sheet glass, ordinary Quality and glazing with oil putty or wooden beads or aluminium beads n.exc 0.5 sq. m in each pane complete all as specified |
| 92 | M&L Preparing new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified |
| 93 | S&FRotational moulded polyethylene water storage tank three layered of capacity 1000 Ltr (Cylindrical vertical with closed top) in position includingfloat valve complete as in repairs all as specified |
| 94 | S&F Bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of pipecomplete as in repairs all as specified |
| 95 | S&F Fancy type chromium plated Bib tap, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of pipecomplete as in repairs all as specified |
| 96 | S&F 15mm dia pillar taps fancy type with capstan heads chromium plated, screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shank and fly-nut, screws for iron pipe and fixed for 15mm dia of pipe complete all as specified |
| 97 | S&F Angular stop cock with adjustable wall flange, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipecomplete all as specified |
| 98 | S&F Concealed stop cock with adjustable wall flange, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe complete as in repairsall as specified |
| 99 | S & F 25 mm bore Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixedcomplete as in repairsall as specified |
| 100 | S & F 20 mm bore Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixedcomplete as in repairsall as specified |
| 101 | S & F Nipple suitable for HDPE water tank 25 mm bore . (mimimum weight 15mm-38gms / 20mm-45gms / 25mm-65gms)complete as in repairsall as specified |
| 102 | S&F PVC connection 15mm dia with PTMT nut of length 600mm long complete all as specified |
| 103 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25 gms) completeas in repairsall as specified |
| 104 | S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. complete all as specified |
| 105 | S&F32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete as in repairsall as specified |
| 106 | M&L Cast iron nahani trap 75mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified |
| 107 | S&FSoap dish, any type, fixed to plugs with chromium plated brass screws in the wall complete as in repairsall as specified |
| 108 | S&FVitreous Chinawash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc complete as in repairsall as specified. |
| 109 | S&FPlastic water closet seat, any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete as in repairsall as specified |
| 110 | S & F PVC low level flushing cistern, valve less, symphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc complete as in repairsall as specified, |
| 111 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified |
| 112 | S&F Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook incl making connections and fixed in position complete as specified |
| 113 | S&F PVC Flexible waste pipe 32/40 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete as in repairs all as specified |
| 114 | Supply only 18/20mm thick pre-formed filler for expansion joints complete all as specified |
| 115 | S&F 80mm thick Bullet resistant Sifcon panels (shock absorption) fixed to walls including drilling, hanging, making good complete all as per manufacturer instruction complete all as specified |
| 116 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 117 | M & L Point wiring with FRLS copper conductor cables in ERW pipe of 16 SWG with accessories, joint boxes/ terminal boxes 60mm deep with 3 mm thick plastic laminated sheet cover for mounting or housing switches and continuous earthing and earthing connections for one light controlled by one switch with FRLS single core sheathed multistrand copper cables 1.5 sq.mm size including earth wire complete all as specified and directed. |
| 118 | All as above item No.119 but one fan point controlled by one one/way switch. |
| 119 | M&LPoint wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed (FRLS) multistranded copper conductor cable 1100 volt grade enclosed in and including in stove enamelled steel conduit concealed wiringwith accessoriesby means ofdash fasteners and cadmium plated screws all as per ISI including sunk type boxes for mounting fitting like switches, sockets fan regulators with 3 mm thick phenolic laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth dolly complete all as specified. |
| 120 | (a)One light/ fan point controlled by one one/way switch. |
| 121 | (b)One 5 A socket on same board |
| 122 | (d)One 5 A socket on independent board |
| 123 | All as above item No.119 but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 5 pin 15 Amps power socket outlet point on independent board/400 watt flood light complete all as specified.. |
| 124 | S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed. |
| 125 | S&F Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 126 | S&F Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 127 | S&F Socket 6A - 2/3 pin combined 2 module |
| 128 | S&F Socket 6A/16A - 2/3 pin combined 2 module |
| 129 | S&F Fan step regulator 120W 2 Module |
| 130 | S&F Ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked. |
| 131 | S&F DB’s Sheet metal enclosure for SPN DB 8 waytype 240 volts and 200 Amp ratings bus bar complete all as specified and directed. |
| 132 | S&F MCB in the DBs given below |
| 133 | (a). MCB SP6 to 32 Amp, 240 volts |
| 134 | (b). MCB SPN 40 to 63 Amp, 240 volts |
| 135 | Taking down existing ceiling fan / Exhaust fanand refixing to original positionafter painting and repair complete all a specified |
| 136 | S&F Indoor decorative channel housing fitting slim LED batten 20 watt with polycarbonate housingand diffuser AC 220-240 volts 50 Hz and connecting with copper conductor flexible cablefrom ceiling rose to connector of the lightfixing the same with two Nos PVC square box complete as in repairs all as specified |
| 137 | S&F LED 20 watt tube light flameproof type FLP-WP made of aluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 4 feet complete all as specified and directed. CAT part No : SSPL/FF/1271 of Ms shyamor equivalent complete all as specified. |
| 138 | S&F LED 30 watt bulk head fixture 30wattt flameproof type FLP-WP made of aluminium alloy LM6, connector block, etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 4 feet complete all as specified. CAT part No : SSPH/BH/1843 of Ms shyamor equivalent. |
| 139 | S&F LM6 Flame proof exhaust fan of size 300mm with louvers including cutting of chases with louver complete all as specified.Make : SSPL/MT/140 of Shyam or equivalent |
| 140 | S&FFlame proof weather proof sheet metal enclosures single door MCB DB SPN 4 way in cast aluminium alloy LM6 construction comprising of following:- (a).MCB FLP/WP SPN 25 Amps 10KA, 240V-1 No (b).MCB FLP/WP SP 10 Amp 10 KA, 240 V- 2 NosMake CAT Part No : SSPL/CS/174 OF Shyam or equivalent |
| 141 | M&L Earthing complete as per electrical plate NO.3 of MES SSR Part I with galvanised steel plate earth electrode 600 mm x 600mm x 6 mm burried directly in ground in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and inclu galvanised iron or steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel earthing wire protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe shall be 20 mm dia GI medium gradeincluding excavation and earth work in any type of soil, PCC pit, CI Frame, RCC covers complete all as specified |
| 142 | M & L Sand cushioning to undergroundcables with sand completeall as specified in clause 19.75 of SSR Part-1 |
| 143 | Supply and laying un-reinforced precast concrete cable cover, class LV, type 1 size 250mm x 150mm x 40mm. |
| 144 | Supply and laying & testing10 sqmm 2 core XLPE cable PVC insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable , (heavy duty), 1100 volts grade with stranded aluminium conductor complete all as specified and directed |
| 145 | S & F GI Pipe line 50 mm bore light grade with all fittings, fixing on wall included supporting clamp / laid in trenchesfor cable protection complete all as specified |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
