Tender For 2000149086-Serv-Jc For Painting Of Equpment Strct, Visakhapatnam-Andhra Pradesh

Tender For 2000149086-Serv-Jc For Painting Of Equpment Strct 2000149086 10 10 10 CLEANING THE SURFACE FOR PAINTING INCLU. 2,500 M2 30 SCAFFOLDING WITH MATERIAL ABOVE 20 MTR 4,000 M3 40 EPOXY PAINTING ( THREE COATS ) 5,000 M2 20 SURFACE PREPARATION TO SAE 2.5 2,500 NO Email : yogeshwara.rao@amns.in Contact : Name : Gaddam Yogeshwara Rao Item Details : 1.Contractor shall be required to have full knowledge of the applicable all types of industrial painting work laws and regulations, conditions of labor, local conditions, and environmental aspects, and shall comply with the requirements thereof. (Minimum experience 7-10 Years) 2. Total Manpower with required skilled level shall be deployed. 3. Application of paint from 0 metres level to 25 metres level at all height, elevations <(>&<)> running equipment system. 4. All painting and surface preparation activity will be done as per AMNS guideline. 5. The quantities for supply of paint are based on reputed standard pack size. 6. High Pressure Water jet cleaning, soap oil cleaning wherever required 7. Surface preparation either by SAE 2.5(sand/copper pebble blasting), (SP-3 Power tools) <(>&<)> Water blast cleaning where ever required. 8. Installation of Scaffolding support (wherever necessary). 9. After completion of job the Copper slag/sand and scrap to be removed this area. 10. One Supervisor deployed for monitoring and execution of job. 11. Super visor should submit Dailly Progress report (measurement sheet) for verification to the engineer in charge on daily basis and the same to be submitted at the time of billing. 12. All consumables like paints, thinner, paint brush, copper slag/ river sand <(>&<)> other safety related items are in vendor scope. 13. All tools <(>&<)> tackles such as scolding pipes <(>&<)> clamps, slings, safety belts, buffing m/c with buffing tools, water blasting machine, Compressor for Compressed air, hopper (calibrated and certificate should be submitted.) are in Vendor scope. 14. All the external issues involved outside the plant premises <(>&<)> Transportation of workers to the job site <(>&<)> viceversa are in vendor scope. 15. Air less spray Painting / Manual painting 3 coats @260 microns DFT based on feasibility.(Primmer-80microns, MIO -100 Microns, Finish Paint-80Microns). Paint Make Jotun/Asian Paints. Item Note :

Refer document

Refer document

Refer document