|
| 1 | Excavation in foundation in ordinary soil (Loam, Clay or sand) Including lift up to 1.50 m and lead up to 30 m and Including, filling watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30mtr. From the foundation trenches. SI. No. 251(a) /.2008. |
| 2 | Earthwork in cutting or in embankment in ordinary soil, excavation to be done from regular pits not exceeding 1/2 M. in depth and work embankment to be in 20 cm layer including ramming and dressing the surface to required levels and slopes and also including 1.5M lifts andlead up to 8 km . The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30M distance as directed by the Engineer-in-charge,Including the cost of royalty of earth.(100+230.10) |
| 3 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8Kms. from the site of work and including watering, dressing etc, labour and T&P etc. required for the proper completion of the work. saplings of girth up to 30cms. measured at a height of 1M. above ground level and removes of rubbish up to a distance of 50M. out side the periphery of area cleared. SI.No. 255(a) |
| 4 | Cement concrete with 4 cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials , labour, tools & plants etcc required for proper completion of the work.In bedding of RCC pipes,including cost of form work in thetrenches |
| 5 | R.C.C work with cement , approved coarse sand & 2cm gauge approved slone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement andits bending , but including its fixing and binding the same with 24 B.W. G.G.I binding wire and shuttering tetc and supply of all materials labour tools & plants etc required for proper completion of the work including cost of binding wire . the rate excludes maing of drip course which shall be paid extra. |
| 6 | M.S (Tor steel or plain) work in plain work such as RCC or RB work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorized over lapping shall be measured and including cost of binding wire. |
| 7 | M-150 class brick work in 1:4 cement and coarse sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all materials labour T&P etc. required for proper completion of the work. |
| 8 | Concrete with 4 cm gaugestone ballast coarse sandof 2.20 F.M. and cement in proportions of 8:4:1in foundation and under floors, including supply of all materials labour, T&P etc. required for proper completion of the work. |
| 9 | RCC work with cement, approved Coarse sand and 20mm stone grit in proportion of 1:1.5:3 excluding supply of reinforcement and its bending but inclding its fixingand binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work, including cost of binding wire. |
| 10 | (A) FOR COLOUMN WORK |
| 11 | (B) FOR LIGHTER BEAM |
| 12 | (C..) FOR ROOF SLAB |
| 13 | (D) FOR LINTALS (RCC MIX 1:1.5:3) |
| 14 | M-150 brick work in 1:4 cement and coarse sand of 1.25 F.M.mortar in superstruture including necesssary thickness of brick as reqruired cutting & moulding of brick as equried thickness of walls not to be less than one brick including supply of all materieals labour tools& plants etc. reqruired for proper completion of the work |
| 15 | Same as above item no. 12 but walls of ½ brick thick in 1:4 cement & coarse sand (F.M. 2.20) Mortar |
| 16 | Mild steel or iron work of M.S.grill & staircase Railing, wrought to required form including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. |
| 17 | Same as above item no. 502 above but z section window excluding glass panes . |
| 18 | OPENABLR PANEL |
| 19 | Cement concrete with 2cm gauge approved stone grit,coarse sand & cement in the proportion of 4:2:1 including supply of all materials,labour,Tools & plants etc.required for proper completion of the work. |
| 20 | 12mm thick plaster with cement and coarse sand in 1:4 over brick work minimum thickness not to be less than 10mm thick including supply of all materials, labour and T & P etc.required for proper completion of the work. |
| 21 | Same as Item No.-8 but for Rough Face. |
| 22 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). sqm 143.80 |
| 23 | 4cm thick 1:2:4 plain Cement Concrete floor with cement, approved coarse sand and 2cm graded approved stone grit finished with 3mm (1/8”) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified including removing any over lapping mortar at joints of the panels if any and giving them a uniform finish, including supply of all materials, labour, T&P etc. required for proper completion of the work. with out base concrete. |
| 24 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 25 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 26 | Finishing wall with water proofing cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, T&P etc.required for proper completion of the work. |
| 27 | Painting or varnishing work in small aras or new wood work with one coat (upto one square metre of ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. |
| 28 | Renewing panes of Glass in doors, window & ventilators or fixing in the new work with 4 mm thick Glass panes fixed with brads and putty including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. |
| 29 | 9.147B Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length(shape& sizeaccording to uPVC profile), ,uPVC extruded glazing beads of appropriate dimension,EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. |
| 30 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) sqm 5399.70 |
| 31 | Providing & fixing of hold fast for chaukhatsof doors and windows. |
| 32 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (a) 250mm x 16mm |
| 33 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (a) 250 mm x 10mm |
| 34 | (b) 200 mm x 10mm |
| 35 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 36 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres |
| 37 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 38 | Dismantling cement concrete or brick orgranolithic floorsto be stone flagged or tiled floor.including stacking of dismantled materials as directed by the Engineer-in-charge within adistance of 60 metre (200 feet). |
| 39 | Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within adistance of 60 metre (200 feet). |
| 40 | Removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 41 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete |
| 42 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 43 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 44 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.26.27.2 With 20 mm thick beveled tegular mineral fibre falseceiling tile (NRC 0.7) |
| 45 | Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as perASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer\"s specification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edgelight weight calcium silicate panels/ tiles |
| 46 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. |
| 47 | Supply and fixing Galvanized Mosquitos proof heavy quality S.S.Wire gaugeheavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3\"x3/8\")/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 48 | Providing and fixing bright finished brass helical door spring (superior quality). |
| 49 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab colour of Black, Cherry/RubyRed or equivalent |
| 50 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick |
| 51 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) : Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 52 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittingsshall be paid for separately) |
| 53 | Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 54 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. |
| 55 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 56 | Providing and fixing water closet squatting pan (Europen type W.C. pan ) with white plastic seat and 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 57 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 58 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. |
| 59 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32mm dia |
| 60 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 61 | Providing &fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P.brass spreaders with brass unions and G.I. clamp comp. including painting of fittings and brackets, cutting and making good the walls.oneurinal basin with 5 litre white P.V.C. automatic flushing cistrn. |
| 62 | Providing & fixing pipes. 100mm dia sand cast iron S & S Pipe |
| 63 | Providing & fixing pipes. 75mm dia sand cast iron S & S Pipe |
| 64 | Providing & fixing M. S. holder - bat clamps of approved design tosand Cast iron/cast iron (spun) pipe embedded in & including cement concrete blocks 10*10*10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size). Including cost of cutting holes&making good the walls etc. (a)For 100 mm dia pipe |
| 65 | For 75 mm dia pipe |
| 66 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110 mm diameter |
| 67 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. a) 110mm |
| 68 | Providing, fixing G. I. pipes complete with G. I. fittings and clamps includingcuttingandmaking good the walls etc. (internal work) - (Exposed on wall) a) 25mm dia nominal bore |
| 69 | 20mm dia nominal bore |
| 70 | Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 25 mm nominal bore |
| 71 | Providing and fixing ballvalve (brass) of approved quality complete. (High or low pressure with plastic floats).20 mm nominal bore |
| 72 | Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions. |
| 73 | Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931. |
| 74 | Providing & fixing 15 mm nominal bore C.P. brassstop cock of standard designandof approvedmake. 20mm dia nominal bore |
| 75 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and makingnecessaryholes for inlet, outlet and overflow pipes but without fittingandbase support for tank. 500 litres capacity |
| 76 | Excavating trenches in all kind ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. Pipes 80 mm to 300 mmdiameter |
| 77 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 78 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 79 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore |
| 80 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe32mm Dia |
| 81 | Providing, fixing, jointing and testing in position of ISI markedUVstabilizedUPVCpipes forsoil,waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints for vertical pipes and solvent cement joints for horizontal pipes, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors,couplers,cowels,clamps,hangers, rubberrings,cleanoutsetc.fixingatwall/ceiling/ floor level supported by clamp & hangers etc.inside duct/suspendedfromfloorunderfalseceiling for propercompletionofthework.The rubberring shall confirmtoIS:5382.(Make:Supreme/Finolex/Prince) (Pipe support : Intellotech / Easyflex / Chilly)Bend |
| 82 | 110 mm |
| 83 | 75 mm |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.18.8.2 20 mm nominal outer dia Pipes |
| 85 | Providing and fixing rigid PVC Nahani trap of self cleaning design with complete i/c cost of cutting and making good the walls and floors. |
| 86 | 2) 110 mm inlet and 110 mm outlet. |
| 87 | Providing and fixing90 mm dia PVC terminal guard heavy quality ISI markedincluding supply of all materials labour T&P etc.required for proper completion of work. |
| 88 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 89 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 90 | 18.58 Providing and fixing PTMT grating of approved quality and colour.18.58.1 Circular type18.58.1.1 100 mm nominal dia |
| 91 | Construction of brick masonry chamber of different internal size i/c s/o all material, labourT&P etc. reqd. for proper completion of work as per direction of E/I as per approved design & drawing of H.P.D.A. (A.R.) (A) 600x600x600 mm |
| 92 | (B) 600x600x900 mm |
| 93 | Providing and fixing gunmetal gate valve withCI wheel of approved quality (Screwed end) |
| 94 | 25mm nominal bore |
| 95 | Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable in P.V.C. conduit pipepartly concealedin wall&partlylaidin slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable as earth wire drawn inside &piano typeswitch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etccomplete in all respects as directed including matching colour wash. |
| 96 | Wiring point forfan. and light duty exhaust fan with 1.0 sq.mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable in P.V.C. conduit pipepartly concealedin wall&partlylaidin slab along with the reinforcement before concreting complete with 1.5 sq mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable as earth wire drawn inside &piano typeswitch and ceiling rose/angle/batten holder on 3 mm thick phinolic laminated backelite sheet etccomplete in all respects as directed including matching colour wash. |
| 97 | Supply & wiringofsubmainwithFR P.V.C. insulated1100 volts grade singlecorecopper conductorcable in heavygaugeP.V.C. coduit partly concealedinwall and partly laid inslab alongwith the reinforcement before concreting complete .2 x 4 sq. mm.With 1 x 2.5 sq.mm. Earth wire In 20 mm dia conduit. |
| 98 | Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete including tube on surface complete in all respect. 1 X 22 WCAT-AAA |
| 99 | Supply and wiring of 2 nos 2.5 sq.mm. FR but inbut in 25 mm dia heavy duty (2 mm thick) PVC conduit FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable partly concealed in wall & partly laid in slab along with reinforcement before concreting, with two number 14 SWG copperearth continuity wire including matching colour wash etc, complete in all respect |
| 100 | Supply and wiring of submainwith 2 nos 4 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in 25 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with two number 8 SWG GI earth continuity wire including matching colour wash etc.complete in all respect |
| 101 | supply and fixing of 6AMP to 32 AMP MCB (10KA).CAT B |
| 102 | S & F surface/Flush mounting 8ways SPN distribution board without additional metal door without MCB complete in all respect, as direct by Engineer in Charge.Cat B |
| 103 | S&F of 40 Amp. 4.P. Isolator CAT B |
| 104 | Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. |
| 105 | Same as item No.(1) but for5amp plug point with piano type switch and socket etc. |
| 106 | Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. |
| 107 | 480x480x200 mm. size |
| 108 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. |
| 109 | S & F surface/Flush mounting 4ways TPN distribution board without additional Door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A |
| 110 | S&F of 63 Amp. 415 V metal clad T.P. rewireable type switch fuse unit on angle iron bracket complete in all respect. Cat.-A |
| 111 | Add for lightfan point with modular type switch in place of piano type switch |
| 112 | Add for 2 way light point with modular type switch in place of plano type switches |
| 113 | Add for plug with modular switch & socket inplace of piano type switch & socket |
| 114 | Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch |
