Military Engineer Services-MES has published Tender For Repair To Summer Appliances Under Ge(N) Patiala. Submission Date for this Tender is 21-03-2024. AMC of Air Condition Tenders in patiala Punjab. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 14-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-03-2024 |
Sl. No. | Item Description |
1 | Dismantling and lowering to ground for repair, inspecting defective of Window/Splittype AC of capacity 1.5 and 2 Tonand re-installing the same after repair complete, testing and shifting to new locations if required as specified by Engr-in-Charge.Note: 1. Day to day complaints of different items should be attended within 12 hours and the equipment should be operational within 24 hours in case of Minor Complaints and within 72 hours for Major complaints. 2. Failure to attend the complaint within the prescribed time shall attract a penalty of Rs 100 per day per complaint. and Rs. 50 for subsequent days.3. Decision of Accepting Officer will be final in case of fine payment |
2 | Supply and replacement of compressor sealed unit suitable for Window TypeACs 1.5 Ton Capacity , reciprocating type flushing , vacuumising and hydration the system, leakage testing , welding/soldering as required and charging refrigerant gas, reinstalling in position and testing for the desired condition includingreplacement of strainer complete all as directed Make- Kirloskar/ Godrej/Tecumseh/LG |
3 | Supply and replacement of compressor sealed unit suitable for Window TypeACs 1.5 Ton Capacity , Rotarytypeflushing , vacuumising and hydration the system, leakage testing , welding/soldering as required and charging refrigerant gas, reinstalling in position and testing for the desired condition includingreplacement of strainer complete all as directed Make- Kirloskar/ Godrej/Tecumseh |
4 | Supply and replacement of compressor sealed unit suitable for Split Type ACs 1.5 Ton Capacityreciprocating typeflushing , vacuumising and hydration the system, leakage testing , welding/soldering as required and charging refrigerant gas, reinstalling in position and testing for the desired condition includingreplacement of strainer complete all as directed Make- Kirloskar/ Godrej/Tecumseh |
5 | Supply and replacement of compressor sealed unit suitable for Split Type ACs 1.5 Ton Capacity, rotarytypeflushing , vacuumising and hydration the system, leakage testing , welding/soldering as required and charging refrigerant gas, reinstalling in position and testing for the desired condition includingreplacement of strainer complete all as directed Make- Kirloskar/ Godrej/Tecumseh |
6 | Supply and replacement of compressor sealed unit suitable for Split ACs 2 Ton Capacity ,reciprocating type flushing , vacuumising and hydration the system, leakage testing , welding/soldering as required and charging refrigerant gas, reinstalling in position and testing for the desired condition includingreplacement of strainer complete all as directed Make- Kirloskar/ Godrej/Tecumseh |
7 | Supply and replacement of compressor sealed unit suitable for Split ACs 2 Ton Capacity ,rotary type flushing , vacuumising and hydration the system, leakage testing , welding/soldering as required and charging refrigerant gas, reinstalling in position and testing for the desired condition includingreplacement of strainer complete all as directed Make- Kirloskar/ Godrej/Tecumseh |
8 | Material and labour forcharging of gas in window type AC 1.5/2 Ton ( R-22/ R410A/R32)after flushing, vaccumising and dehydration as per laid down standard practice and existing model including replacement of strainer complete as directed. |
9 | Material and labour forcharging of gas in split type AC 1.5/2 Ton ( R-22/ R410A/R32)after flushing, vaccumising and dehydration as per laid down standard practice and existing modelincluding replacement of strainer complete as directed. |
10 | Servicing of Air conditioners of window/ split type of any capacity 1.5/ 2 Ton by removing dirt and debries on all parts of air conditioner, washing and lubricating all moving parts complete by the manufacturer technician as directed by the Engr-In-Charge as per standard norms of the Manufacturer. Note :1.Lowering, dismantling, re-installing of air conditioners after reassembling the equipment in same/different position shall be included in the unit quoted rate. 2. Day to day complaints of different items should be attended within 12 hours and the equipment should be operational within 24 hours in case of Minor Complaints and within 72 hours for Major complaints.3. Failure to attend the complaint within the prescribed time shall attract a penalty of Rs 100 per day per complaint. and Rs. 50 for subsequent days.4. Decision of Accepting Officer will be final in case of fine payment |
11 | Servicing of Air conditioners of window/ split type of any capacity 1.5/ 2 Ton Located at ATC Building at 660 AOPby removing dirt and debries on all parts of air conditioner, washing and lubricating all moving parts complete by the manufacturer technician as directed by the Engr-In-Charge as per standard norms of the Manufacturer. Note :1.Lowering, dismantling, re-installing of air conditioners after reassembling the equipment in same/different position shall be included in the unit quoted rate. 2. Contractor is advised to ascertain the position of different ACs located at site where servicing is to be done. Approximate Height of ATC Building is 18 meters 3. Day to day complaints of different items should be attended within 12 hours and the equipment should be operational within 24 hours in case of Minor Complaints and within 72 hours for Major complaints.4. Failure to attend the complaint within the prescribed time shall attract a penalty of Rs 100 per day per complaint. and Rs. 50 for subsequent days.5. Decision of Accepting Officer will be final in case of fine payment |
12 | Supply only Front grill of window type AC with shutters as per existing model complete all specified and directed by EIC |
13 | Supply only 1/2"" and 1/4"" reverse valve for split AC valve as per existing model complete all as specified and directed by EIC . Make: Carrier Voltas LG ( Set of 2 ) |
14 | Supply only suction valve size 3/8"" for 1.5/2 TR split AC complete all as specified and directed by EIC. Make: BAP/ TAK Cassel |
15 | Supply only delivery valve size 1/2"" for 1.5/2 TR split AC complete all as specified and directed by EIC. Make: BAP/ TAK Cassel |
16 | Supply only swing motor for 1.5/2 TR split AC indoor unit for any existing make complete all as specified and directed by EIC. Make: Carrier/LG/samsung/daikin |
17 | Supply and replacement of double shaft blower motor of size 1/10 HP for window Air Conditioner of capacity 1.5 Ton single phase 230 V, 1500 rpm complete all specified and directed by Engr-in-charge. Make- Crompton/Kirlosker suitable for AC of make fedder Lloyd/ Blue Star/ LG/ Carrier/Samsung |
18 | Supply and replacement of indoor/blower motor of size 1/10 HP for split Air Conditioner of capacity 1.5 Ton as per existing model of approved make. |
19 | Supply and replacement of Fan motor for split typeAir Conditioner of capacity 1.5/2.0 Ton as per existing model of approved Make Voltas/LG/Samsung. |
20 | M&L for rewinding of blower motor double speed (high & low) with supper enamelled copper wire of proper gauge with and including rubber bush of capacity1/10 HP motor complete as directed. |
21 | Supply and fix Rolling type PVC Blower for indoor unit of split AC 1.5 / 2.0 Ton Capacity Make as per existing make as directed by EIC |
22 | Supply and fix Fan Blade for out door unit of split AC 1.5 /2.0 Ton Capacity make as per Existing |
23 | Supply and fix as in replacement flexible copperconductor cable 3 core, PVC insulated of size70/.0076 and connected electrically to any electric devices/ofanycapacity sizetype & make etc complete all as specified and directed.Make:KEI,Plaza,Kalinga,Havells |
24 | Supply and Replacement of capacitor 6 mfd 230volts (+) 5% dry type complete suitable for window /split Ac motorsas specified and directed. Make Tibcon/Elcap/ |
25 | Supply and replacement of running capacitor 36 mfd complete as directed Make-TIBCON/SIEMENS or equivalent. |
26 | Supply and replacement of running capacitor 45/50 mfd complete as directed Make-TIBCON/SIEMENS or equivalent. |
27 | Supply and replacement of starting capacitor of size 100-120 MFD for Air Conditioner up to 2 Ton Capacity complete as directed Make-TIBCON/SIEMENS or equivalent. |
28 | Supply and replacement of starting capacitor of size 80-100 mfd. Complete as directed Make-TIBCON/SIEMENS or equivalent. |
29 | Supply and replacement of box type relay type Model Sr-1622 for Air Conditioner 1.5 Ton/2 Ton capacity as per sample approved by department complete all as directed. Make- MICROTECH/ HITECH . |
30 | Supply and replacement of PCB assemblyof existing make for window type ACs 1.5 to 2.0 ton |
31 | Supply and replacement of PCB assemblyof existing make for split type ACs 1.5 to 2.0 ton |
32 | Repair of PCB assemblyof existing make for window type ACs 1.5 to 2.0 tonwith remote control. |
33 | Repair ofPCB assemblyof existing make for split type ACs 1.5 to 2.0 tonwith remote control. |
34 | Supply and fix PCB assembly of existing make for invertor AC as specified and directed by Engr-in-charge. |
35 | Repair ofPCB assembly of existing make for invertor Split AC as specified and directed by Engr-in-charge. |
36 | Supply and fix PCB assembly of existing make for invertor Window AC as specified and directed by Engr-in-charge. |
37 | Repair ofPCB assembly of existing make for invertor Window AC as specified and directed by Engr-in-charge. |
38 | Supply and fix indoor motor of Invertor AC of existing make as specified and directed by Engr-in-charge |
39 | Supply and replacement of fan blade of window ACs of cap 1.5 to 2.0 ton complete as directed. |
40 | Supply and fix in replacement new fan motor in Window AC 1.5/2 Ton as specified and directed by EIC |
41 | Dismantling and lowering to ground for descaling of condenser with appropiate chemical towindow/split typeACsof capacity 1.5 and 2 Tonand re-installing the same it original positiontestingcompleteall as directed. |
42 | Dismantling and lowering to ground for repair of condenser with appropiate welding/ brazing, installing new condenser fins copper type for Window/splitACsof capacity 1.5 Tonand re-installing the same it original positiontestingcompleteall as directed. |
43 | Dismantling and lowering to ground for repair of condenser with appropiate welding/ brazing, installing new condenser fins copper type for Window/splitACsof capacity 2 Tonand re-installing the same it in original positiontestingcompleteall as directed. |
44 | Supply and fix PVC enclosures, single pole and neutral with a two pin and earth plug and socketed complete with one single pole MCB,s capacity 32 Amp /40 Amp 240Volts. |
45 | Supply only Thermostat switch 2059/2064/2054 for Window / Split type AC unit of cap 1.5 ton/ 2 ton. |
46 | Supply only Copper filter double capillary pencil type for window/split type AC of cap 1.5 ton/ 2 ton complete all specified and directed. |
47 | Supply only wiring kit for AC window/Split type 1.5/2 Ton |
48 | Supply only remote control hand set for existing Window type/ split type air conditioner of make LG/Samsung/Voltas/Bluestar and of cap 1.5/2 ton with requred pencil cells as per sample complete all as specified and directed. |
49 | Supply only air filter made of Ric/ Nylon suitable for split/ window type AC 1.5/2 TR cap complete all as specified and as directed . Make: Samsung/LG/Voltas/carrier. |
50 | Supply and replacement PVCpipe flexible type 20mm dia (including flexible clamps) for drain out waste water from split Acs. |
51 | Carrying out pressure leak test for 1.5/2 ton capacity window/split type AC by Nitrogen gas pressure for detecting the leakage in condensing & cooling unit, referigerant pipe and repairing the leakage by welding or brazing, checking the leakage after repairing, flushing out nitrogen gas, vaccumisation complete all as specified and directed. |
52 | Supply and fix in renewal outdoor condensing unit of spilt type AC of capacity 1.5 TR capacity complete with condensing coil, coil frame, wiring kit, starting and running capacitors, relay condensing/ outdoor motor with blade complete all as specified and as directed. Make :- Opel/ Accent/ Skoda/ LG/ Carrier |
53 | Supply and fix in renewal ofindoor unit of 1.5 TR capacity split type AC (Make: Omega/ ITC/ Totaline) with blower motor, front grill and connecting the copper tubing by brazing, detecting leakage, rectifying the same complete all as specified and as directed. Note : Supply and charging of refrigerant gas as required shall be measured and paid for separately. |
54 | Supply and fix in renewal outdoor condensing unit of spilt type AC of capacity 2 TR capacity complete with condensing coil, coil frame, wiring kit, starting and running capacitor, relay condensing/ outdoor motor with blade complete all as specified and as directed. Make :- Opel/ Accent/ Skoda/ LG/ Carrier |
55 | Supply and fix in renewal defective indoor unit of 2 TR capacity split type AC (Make: Omega/ ITC/ Totaline) with blower motor, front grill and connecting the copper tubing by brazing, detecting leakage, rectifying the same complete all as specified and as directed. Note : Supply and charging of refrigerant gas as required shall be measured and paid for separately. |
56 | Supply only kit for window AC comprising cooling, condensing unit, fan motor, Compressor 1.5 TR and electrical accessories, testing complete all as specified and as directed. Make: Opel/LG/Voltas/Viva |
57 | Supply and fix AC Contactor of 32 Amp Single phase for Split AC 1.5/2 Ton as per existing make as per existing make |
58 | Dismantling and lowering to ground for repairs inspecting defects of water coolers of capacity 40/120/150 litres with cleaning, oiling greasing of all required parts etc and re-installing the same after repair and testing to the complete satisfaction of Engineer -in - Charge. Note: 1. Day to day complaints of different items should be attended within 12 hours and the equipment should be operational within 24 hours in case of Minor Complaints and within 72 hours for Major complaints. 2. Failure to attend the complaint within the prescribed time shall attract a penalty of Rs 100 per day per complaint. and Rs. 50 for subsequent days.3. Decision of the Accepting Officer will be final in case of fine payment |
59 | Supply and replacement of compressor sealed unit forwater cooler of size 40/80 litre including refixing the unit , supplying and charging gas after satisfactory leak testing including welding/soldering as required and commissioning complete all as directed. Make - Kirloskar/ Godrej/ Blue Star/Tecumseh |
60 | Supply and replacement of compressor sealed unit forwater cooler of size 120 and 150 litre including refixing the unit , supplying and charging gas after satisfactory leak testing including welding/soldering as required and commissioning complete all as directed Make - Kirloskar/ Godrej/ Blue Star/Tecumseh |
61 | Material and labour for gas charging ( Freon-22/R134-a) to the water coolers of capacity 40/80 litres after satisfactory vacuum and pressure including replacement of strainer & testing all as directed. |
62 | Material and labour for gas charging ( Freon-22/R134-a) to the water coolers of capacity 120/150 litres after satisfactory vacuum and pressure including replacement of strainer & testing all as directed. |
63 | Supply and fixing of push cock 15 mm CP size for water coolers as per existing shape and size as directed. Make-KK/EKTA. |
64 | Supply and replacement offan motor of condenser size 1/35 HP single phase 50 HZ 230 Volts for water cooler of capacity 40/80 Litre complete with blade as per existing model and connecting itemscomplete all as specified my EIC (Make:FRAC MASTER/AIR MASTER |
65 | Supply and replacement offan motor of condenser size 1/10HP single phase 50 HZ 230 Volts for water cooler of capacity 120/150 Litre complete with blade as per existing model and connecting items complete all as specified by EIC(Make:FRAC MASTER/AIR MASTER |
66 | Supply and replacement offan blade for water cooler of capacity 40/80 Litre complete with blade as per existing model and connecting itemscomplete all as specified my EIC |
67 | Supply and replacement offan bladefor water cooler of capacity 120/150 Litre complete with blade as per existing model and connecting items complete all as specified by EIC |
68 | Supply and replacement of relay for water cooler with OLP (Make MICROTECH/HITECH |
69 | Supply and replacement of Box type relay with OLP as per existing make |
70 | Supply and replacement of running capacitor 10 mfd/ 15 mfd (Make-TIBCON/SIEMENS) |
71 | Supply and replacement of running capacitor 36mfd (Make-TIBCON/SIEMENS) |
72 | Supply and replacement of starting capacitor 40/60 mfd 230 voltscomplete as directed (Make- TIBCON /SIEMENS) |
73 | Supply and replacement of PVC float Valve suitable for 15 mm bore pipe (ISI marked) complete suitable for water coolers/desert coolersas per existing at site complete all as directed. |
74 | Supply and replacement of thermostat switch of water cooler complete as directed (Make- DASSPASS/ INDFOSS) |
75 | Cutting the rusted unserviceable base of 120/80/40 litre capacity, water cooler body, material and labour for fabrication of new base made of MS sheetand angle iron as per existing size and thickness incl welding of small patches as directed by engr in charge |
76 | Supply and fix in renewal, condensing coil for water cooler capacity 40/80 Litres of existing make of 22 Gauge MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by EIC. |
77 | Supply and fix in renewal, condensing coil for water cooler capacity 60/120 Litres of existing make of 22 Gauge MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by EIC. |
78 | Supply and fixing in replacement of complete top door made out of stainless steel 20 gauge sheet with handle and locking arrangement with double keys including door gasket, insulating material, PVC inner sheet of suitable thickness for 120/40 ltrs capacity water cooler as per existing size and shape, welding work, nuts, bolts and washers all as directed and specified by engr-in-charge. |
79 | Material and Labour for detecting any leakage from cooling and condensing coil fin of water cooler capacity 40/80 L of any make with the help of high pressure nitrogen gas and repairing the leakage by welding/brazing of cooling and condensing coils by disconnecting inclusing renewal of new filter, new capillary tube and testing the unit complete all as specified and directed by EIC |
80 | Material and Labour for detecting any leakage from cooling and condensing coil fin of water cooler capacity 120/150L of any make with the help of high pressure nitrogen gas and repairing the leakage by welding/brazing of cooling and condensing coils by disconnecting inclusing renewal of new filter, new capillary tube and testing the unit complete all as specified and directed by EIC |
81 | Material and Labour fornew water tank of 40/80 L cooling capacity including all outer side puffing for insulation complete all as specified and directed by EIC |
82 | Material and Labour fornew water tank of 60/120 L cooling capacity including all outer side puffing for insulation complete all as specified and directed by EIC |
83 | Supply only rubber waste pipe/ drain pipe with clamps suitable for water cooler of any capacity complete all as specified and directed by EIC |
84 | Disconnecting and complete opening of voltage stabilizer of capacity up to 5KVAand removing the burnt out unserviceable parts and cleaning, material and labour for new parts, Rewinding with copper enamelled wire as per existing gauge complete all as specified and directed by EIC. |
85 | Rewinding with copper enamelled wire as per existing gauge complete all as directed of transformer assy of voltage stabilizer s of capacity up to 2 KVA. |
86 | Rewinding with copper enamelled wire as per existing gauge complete all as directed of transformer assy of voltage stabilizer s of capacity of3 to 5KVA. |
87 | Supply and replacement of boost/buck relay of voltage stabilizer of capacity up to 2 KVA. |
88 | Supply and replacement of boost/buck relay of voltage stabilizer of capacity up to 3 to 5 KVA. |
89 | Supply and replacement of cut out relay of suitable for up to 2 KVA |
90 | Supply and replacement of cut out relay of suitable for 3 to 5 KVA |
91 | Supply and replacement of Volt meter for voltage stabilizer suitable for 3 to 5 KVA |
92 | Supply and replacement ofcopper pipe heavy duty of size 5/8" all as specified and directed . |
93 | Supply and replacement ofcopper pipe heavy duty of size 3/8" all as specified and directed |
94 | Supply and fixing pipe insulation for copper pipe of size 5/8" and 3/8" all as specified and directed. |
95 | S&F Top Plug3 Pin 5 Amps 230 Volts Make: Anchor/Plaza. |
96 | S&F Top Plug3 Pin 15 Amps 230 Volts Make: Anchor/Plaza. |
97 | Supply and replacement of compressor sealed unit for refrigerator of size 165 to 220Ltr cap with and including supplying and charging of gas and including welding/soldering for leak proof as required and commissioning complete all as specified and directed Make Kirloskar/Tecumseh/LG/Godrej/Whirlpool. |
98 | Supply and replacement of compressor sealed unit for refrigerator of size 270 to 310 Ltr cap with and including supplying and charging of gas and including brazing for leak proof as required and commissioning complete all as specified and directed Make Kirloskar/Tecumseh. |
99 | Supply and replacement of startingbox type relay PVC 1/8 HP suitable for any make Refrigerator of size 165 to 310 Lts (Make TIBCON/SIEMENS) |
100 | Supply and replacement of startingbox type relay PVC 1/6 HP for Refrigerator of size310 Lts (Make TIBCON/SIEMENS/HITECH) |
101 | Supply and replacement of over load protector 1/6 HP for Refrigerator of size 165 to 310 Lts (Make TIBCON/SIEMENS/HITECH) |
102 | Supply and replacement of PCB assemblyof existing make for referigerator of capacity 165 to 220 Ltr as per existing make. |
103 | Supply and replacement of PCB assemblyof existing make for referigerator of capacity 260 to 310 Ltr as per existing make. |
104 | Supply and replacement of PTC relay ofRefrigerator of 286/ 310 Lts (Make Godrej /Whirlpool) |
105 | Supply and replacement ofrefrigerantgas in the refrigerator & Deep Freezerincluding satisfactoryleak proofand vacuum test of capacity 260 to 310 ltr including replacement of strainer as per existing model and direction of EIC. |
106 | Supply and replacement ofrefrigerantgasin the refrigerator & Deep Freezerincluding satisfactoryleak proofand vacuum test of capacity 165 to 220 ltr including replacement of strainer as per existing model and direction of EIC. |
107 | Supply and replacement ofFreezer with door frame of refrigerator capacity 165 to 220 ltrs |
108 | Supply and replacement ofFreezer with door frame of refrigerator capacity 260to 310 ltrs |
109 | Supply and replacement of complete condenser assembly of refrigerator suitable for 286 to 310ltrs of existing make. |
110 | Supply and replacement of complete condenser assembly of refrigerator suitable for 165to 220ltrs of existing make. |
111 | Supply and fix in renewal of copper capillary for referigerator of any capacity as per existing make as specified by EIC. |
112 | Supply and fix in renewal of dryer filter for referigerator of any capacity as per existing make as specified by EIC. |
113 | Supply and fix in renewal of Biometal in referigerator of capacity 165 to 310 ltr as per existing model as directed and specified by EIC |
114 | Supply and replacement of door gasketsof refrigerator capacity 165 to 310 ltrs of existing make as directed and specified by EIC. |
115 | Supply and fixing Timer for Refrigerator of Cap 286 to 310 Lts. |
116 | Supply and replacement of fan motor of freezer of refrigerator 165ltr to 310 ltr. |
117 | Supply and replacement of axial fan motor and blade of deep freezer 220 & 320 lts and ( 50/60 Hz) Size 120x120x38 |
118 | Supply and fix door gasket suitable for 220/320 ltr deep freezer doors complete all as specified and directed |
119 | Supply and replacement ofroll bond evaporator forfor deep freezer of cap 220/320 Ltr |
120 | Supply and fix starting relay ISI marked for Deep freezer of capacity 220/320 ltr complete all as specified and directed |
121 | Supply and fix OLP ISI marked forDeep freezer of capacity 220/320 ltr complete all as specified and directed |
122 | Supply and fix thermostat ISI marked for deep freezer of capacity 220/320 ltr complete all as specified and as directed |
123 | Supply only starting capacitor 50 mfd ISI marked for deep freezer of capacity 220/320 Ltr complete all as specified and directed.Make: Asian/Sharda/unistar/tesla/epcos. |
124 | Supply and replacement of fan blade of referigerator of capacity 165 ltr to 310 ltr complete as specified and directed by EIC. |
125 | Supply and replacement of fan blade of Deep freezer of capacity 220 ltr complete as specified and directed by EIC. |
126 | Supply and replacement of compressor sealed unit for Deep Freezer of 220/320 Ltr cap with and including supplying and charging of gas and including brazing for leak proof as required and commissioning complete all as specified and directed by EIC. Make Kirloskar/Tecumseh. |
127 | Supply and replacement ofrefrigerantgas in Deep Freezerincluding satisfactoryleak proofand vacuum test of capacity 220/320 ltr including replacement of strainer as per existing model and direction of EIC. |
128 | Servicing of Water purifier of any description complete by the manufacturer technician as directed by the Engr-In-Charge as per standard norms of the Manufacturer. (Unserviceable spares shall be measured and paid separately) :- Note: 1. Day to day complaints of different items should be attended within 12 hours and the equipment should be operational within 24 hours in case of Minor Complaints and within 72 hours for Major complaints. 2. Failure to attend the complaint within the prescribed time shall attract a penalty of Rs 100 per day per complaint. and Rs. 50 for subsequent days.3. Decision of Accepting Officer will be final in case of fine payment |
129 | Supply and Replacement of Candle/spun filter of RO water purifier |
130 | Supply and Replacement of inline Carbon filter for RO water purifier |
131 | Supply and Replacement sediment pre filter for RO water purifier |
132 | Supply only PVC pipe 1/4" dia for inlet / outlet water connection for RO water purifier |
133 | Supply and fix Suction/delivery RO motor |
134 | Supply and fix RO booster pump as per existing sample as specified and directed by EIC |
135 | Supply and fix RO membrane as per existing sample as specified and directed by EIC |
136 | Supply and fix SMPS adaptor for RO purifier as per existing make |
137 | Supply and fix RO Flow restrictor RO valve as per existing sample as specified and directed by EIC |
138 | Supply and fix solenoid valve for RO purifier as per existing make |
139 | Supply and fix RO filter tap as per existing make |
140 | Supply and fix RO Pre filter bowl as per existing make and model |
141 | Inspection visit of technical team for AC system comprises of Air cooled condensing unit of cap 11 TR qty 04 Nos. & Air handling units of Cap. 3000 CFM qty 02 Nos Following is included in the visit: 1. Servicing of the complete AC system including cleaning of Pre filters, fine filters and Hepa filters 2. The compressor and AHU will be checked for its proper functioning with electrical connections and if any defect is found, the same is to be informed. 3. Safety controls such as pressure cut outs will be tested with necessary tools and equipments for proper functioning and in case of any mal- functioning same need to be rectified after consultation with EIC. 5.Inspection of Electrical cabling, Electrical switch boards and electrical accessories connected with main incomer to the system and minor repairs in electrical panels to be done as directed and specified by EIC. |
142 | AHU components Air handling units of Cap. 3000 CFM qty 02 Nos exhaustive servicing including refrigerant coil/cooling coil cleaning, AHU coil cleaning, checking for any loose electrical connections, changing of thimbles etc if required separating the components and cleaning with vacuum cleaner and by using antibacterial/ antimicrobial solution. Lubricate and grease motor and blower bearing and Reassemble the components thereafter as per the direction of EIC. Each job includes cleaning of 2 AHU units. |
143 | Air Cooled 11 TR Condensing units ( 4 units) exhaustive servicing including coil cleaning with vacuum cleaner and by using antimicrobial solution , electrical connection inspection and cleaning of fan blades and repair and maintenance of fan motor etc.( Note : 1 job includes cleaning of all four condenser units of 11 TR) |
144 | Replacement of coarse air Prefilters of size 600 x 600 x 50 mm. Coarse filter will be G4 washable filter ( 50mm deep) class having average arrestance of 85-98% for 10 microns size as per EN779 2002, after damper at mouth of supply. |
145 | Replacement of fine filters bag type fine filters of size 600 x 600 x 300mm. Fine filters will be F-7 filters (300 mm deep) Average effieciency 85-95% for 1 micron size as per EN 779 2002 standards. |
146 | M & L for removing of damaged portion of duct insulation and fixing new nitrile thermal insulation of thickness 15 mm for duct with aluminium laminated closed cell elastomeric insulation of thickness 9 mm for supply duct at AHU and exhaust duct at discharge, thereby making the duct surface free from dust etc using a thin film of insulation material all as per manufacturer"s recommended adhesive. Both duct and insulation, keeping the insulation material under compression( without any stretching), seal all joints air tight etc complete all as specified and as directed by EIC. |
147 | Supply and replacement ofline operated 3 phase AC motor IE2 of capacity 3.7 KW/ 5HP feq = 50+-5% Hz, IP 55 suitable for AHU operation at central AC Plant completeincluding necessary fitting & connection. CAT ref : MHCITGS+E154X7. Note: Contractor is advised to visit site to ascertain the specifications of AC motor as specified by EIC. Make: Havells ( existing make) |
148 | Rewinding of existing line operated 3 phase AC motor of capacity 3.7 KW/ 5 HP feq 50+-5%, IP 55 and removing the burnt out unserviceable parts and cleaning, material and labour for new parts, Rewinding with copper enamelled wire as per existing gauge complete all as specified and directed by EIC. (Make:Havells ( existing make) |
149 | Supply & installation of Calcium dryer as per existing make as directed by Engr-in-charge |
150 | Supply & installation of HEPA filters of size 880 x 610 x 150 mm as per existing |
151 | Supply & installation of HEPA filters of size 610 x 610 x 200 mm as per existing |
152 | Supply & installation of V Belts for AHU blower as per existing make |
153 | Supply and fix AC Contactor of 32 Amp three phase as per existing make CAT No. MNX-A2. |
154 | Supply andfix MCB 3 pole 25 Amp as per existing make. |
155 | Supply & charging of refrigerant R407c along with pressure testing with nitrogen & vaccum complete with all respect including rectification of leakage by welding as directed by Engr-in-charge |
156 | Supply and charging of Referigerant R 22 in central AC plant withpressure testing with nitrogen and vaccum complete with all respect including rectification of leakage by welding as specified and directed by Engr-in-charge. |
157 | Note for Item No. 141 to 155 herein above: Above items pertains to AC system installed at ICU in MH Patiala; The Bidder is advised to visit the plant prior quotation for checking of specification of existing AC Plant components incl AHU, Condensing Units, filters, electrical panels etc. |
158 | Material and Labour for servicing and Repair of commercial air curtain unit for prevention of Dust and conditioned air losses, single phase, 220 Volt, 50 HZ made out of MS/CRCA sheet of minimum thickness 18 Gauge finished with two coats of red oxide primer and final cost of synthetic enamel paint (over Baked) with MS CRC 18 Gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc complete with fittings and accessories so as to produce 1-1.5 m/sec air velocity at floor level for door opening as per existing model at the site as directed by EIC. Note: Instrument to measure air velocity to be brought by the Contractor as per the approval of EIC. |
159 | Supply and fix 2800 RPM Motor fan assembly for air curtain as per existing make and model as per approval of EIC |
160 | Supply and fix 6x6 Blower wheel for air curtain as per existing make and model as per approval of EIC |
161 | Supply and fix Housing for air Curtains as per existing make and model as per approval of EIC |
162 | Supply and fix Magnetic proximity switch as per existing make and model as per approval of EIC |
163 | Supply and fix air curtain air filters as per existing make and model as pe approval of EIC |
164 | Replacement of Capacitor 4 mfd 230 Volts (+) 5 % dry type complete suitable for desert cooler all as specified and directed. Make- TIBCON/ELCAP/"AD/TORCON) |
165 | Painting of one coat of primer red oxide and two coat of super enamelled paint for Desert cooler and matching the same on the exterior colour by metal paste/puty and of any size/ make complete all as specified and directed. |
166 | Dismantling of desert cooler motor,(any make and type,taking out rotor removing all coils(burnt and alive)rewinding all the coils with suitable size super enamled copper wire(ISI marked) including all packing materials,insulating materials,varnishing greesing oils,reassembling,split pins, body blade screw and testing on full speed as per the direction of EIC complete all as specified and directed . Note: Cost of Replacement of UNSV gun metal bush and shaft for desert cooler shall be included under this item |
167 | Supply and fixing in replacement submersible PVC body Tulu pump suitable for desert cooler of any size complete all as specified and directed. Make- KHAITAN/COOL HOME/CG |
168 | Supply and fixing in replacement wood wool padding for desert coolers on all three sides ( for any size and type of cooler) complete all as specified and directed.Each set consists of 3 Pads |
169 | Supply and fixing flexible PVC transparent 15mm bore pipe set comprising one pipe from pump to PVC junction and 3 Nos short pieces of pipe from junction to shutter. |
170 | Supply and replacement offan motor 1/10HP capacity suitable for desert cooler completeincluding necessary fitting & connection. Make:Khaitan/Cool home/Crompton Greaves |
171 | Supply and replacement of Desert Cooler body duly spray painted made out of 22 gauge MS sheet complete with front grill side shutters, control switch piano type 5 Amp speed regulator including lamp, wiring with suitable copper cable complete all connection |
172 | Supply and fixing in replacement of PVC front grill (Jali) suitable to existing size. |
173 | Supply and fix as in replacement flexible copperconductor cable 3 core, PVC insulated of size70/.0076 with plug top and connected electrically to any electric devices/ofanycapacity sizetype & make etc complete all as specified and directed. |
174 | Supply & replacement of regulator knob type switch, 3 step control of speed of Desert cooler motor 230 volts, 50 Hz all as specified and directed. |
175 | S & Ffan blade ofsuitable size and make for desert cooler complete all as specified and directed. |
176 | S & F Top Plug3 Pin 5 Amps 230 Volts complete all as specified and directed. |
177 | S & F metallic frame with set of 4 legs as per model suitable for fixing/mounting fan motor of desert cooler with nuts, bolts, rubber etc., complete all as specified and directed. |
178 | S&F in replacement of PVC water distributer and elbow for desert cooler ( for any type and size of desert cooler) complete all as specified and directed. |
179 | Supply and replacement of PTMT Ball Valve suitable for 15 mm bore pipe complete suitable for desert cooler complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail