Military Engineer Services-MES has published Tender For Provision Of Wall Floor Tiling And Sensor Type Fittings In Toilet Of Adm Building (Phase-Iii) And Syed Building At Cqa(Hv) Avadi And Provn Of Pvc Water Tank In Lieu Of Existing Rcc Water Tank At Ptms Fafa And Defence Civilian Married Acc. Submission Date for this Tender is 25-03-2024. Tile Flooring Tenders in avadi Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Mar-2024 | 8187 Corrigendum | Other | 18-03-2024 |
| 2 | 18-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-03-2024 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame exc. 1.50 sqmbut nexc4.00 sqm each with shutter (without taking of shutter from the frame) complete all as specified and as directed. |
| 2 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS squaretube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed. |
| 3 | S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick(styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed. |
| 4 | S&F 100mm butt hings, extruded aluminiumm alloy with galvanised mild steel hinge pin, anodised, barrel tower bolts of extruded section and fixed |
| 5 | S&F 100mm buttlong aluminimum anodised, barrel tower bolts of extruded section and fixed |
| 6 | S&F 150mm long aluminimum alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded sections |
| 7 | S&F 100mm long aluminimum handle, cast type anodised |
| 8 | Demolition of cement concrete (unreinforced) in ground floor or pavingsn exc 15 cm thickness (below or above ground level) all as directed. |
| 9 | M&L for 25mm thick plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring, finished even and smooth, without using extra cement complete all as specified and as directed. |
| 10 | M&L for joint free Non-skid ceramiccoloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm,but not exceeding 0.38 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade over 15mm thick screed bed or bedding layer CM 1:4 as specified and as directed. |
| 11 | M&Lfor glazed ceramic coloured tiles of size 300X200X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement as in vertical surfaces such as dado/skirting and facea of side bldg over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 12 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. |
| 13 | S&F in repairs 10 ltr capacity PVC valveless syphonic ation type flushing cistern low level whit with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified. |
| 14 | S&F plastic water closet seat black closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised higing device complete all as specified. |
| 15 | S&F repairs vitreous china wash basin, angle back, size 600x480mm white, with pedestal, waste coupling excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified. |
| 16 | S&F in repair vitreous china wash basin white, flat, back, or angle back type, size 550x400 mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified. |
| 17 | S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified. |
| 18 | S&F for 20mm bore stop valve fancy type, chromium plated with long shank and cup(concealed type) complete all as specified. |
| 19 | S & F 600mm x 450 mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as directed. |
| 20 | Cutting existing 25mm bore steel tubing for alterations or additions complete all as specified. |
| 21 | Taking up or down steel water tubings and connections of 20mm bore pipe complete all as specified and directed. |
| 22 | S & F 20mm bore PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete and making good the area to match with existing surface,complete all as specified and as directed. |
| 23 | S & Fixed in repair waste coupling 32 mm of PTMT (half or full threaded). (Minimum weight 45 gms)for wash basin and Urinal pot all as specified. |
| 24 | S&F 15mm dia bore chromium plated Bip tap, fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed. |
| 25 | S&F 15mm bore Pillar taps bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified. |
| 26 | S&F 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement all as s pecified. |
| 27 | S&F in repairs 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints laid in trenches or in floors all as specified |
| 28 | S&F in repairs 110 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints laid in trenches or in floors all as specified |
| 29 | S&F 75 mm bore. PVC (SWR) bends any radius all as specified and as directed. |
| 30 | S&F 110 mm bore. PVC (SWR) bends any radius all as specified and as directed. |
| 31 | S&F in repairs Vitreous china bowl urinal flat back, of size 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including providing and fixing plugs, bendding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia, fixed in repairs, complete all as specified and directed. |
| 32 | S&F in repairs brass chromium plated Health Faucet with 1mtr Flexible tube & Hook complete all as specified and directed. |
| 33 | S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60 cm long between flanges, complete all as specified and directed. |
| 34 | S&F Sheet glass shelf assembly consisting of 5.5mm thick, 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 35 | Material and labour for preparation of old surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on walls and applying two coats of white wash on walls including cleaning the floor/joinery surfaces, glass panes all as directed. |
| 36 | Material and labour for preparation of old surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots two coats of white wash on ceiling including cleaning the floor/joinery surfaces, glass panes all as directed. |
| 37 | S&F for Sensor type urinal of size 29.5x32.5x57.5cmall as specified and directed. Make: Hindware or equivelent as approved by GE |
| 38 | S&F for Sensortype pillar taps all as specified and directed. Make: Hindware or equivelent as approved by GE |
| 39 | Demolition of cement concrete (reinforced) in any position not otherwise specifically provided. Note:Reinforcement cut as required to facilitate demolition |
| 40 | Demolition of Brickwork of stone/boulder masonry, built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stonework and precast concrete articles |
| 41 | Removing plants, weeds etc., on chajjas, roofs, walls at any position and at any situation of height upto and including 03 storeys/10m, RCC roof parapets and sparying weed controlling chemical using glyphosate or equivalent in dosages as per manufactures |
| 42 | M & L for Brickwork with flyash old size bricks straight or curved on plan exc 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. |
| 43 | M & L Rendering 15mm thick in CM 1:6 on other than fair faces of brickwork or concrete surfaces on external surfaces finished even and fair all as specified and as directed. |
| 44 | M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and directed |
| 45 | S & F in repairs rotational moulded polyethylene water storage tank three layered( cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR part I of capacity of 1000 litres conforming to IS specification all as specified. |
| 46 | S & F in repairs 20 mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified |
| 47 | S & F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455gms) bore of pipe 20mm as in repairs complete all as specified and as directed. |
| 48 | Dismantling of APP based polymeric membrane reinforced with polyster non-woven fabric(measured flat and not girthed) complete all as specified and as directed |
| 49 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hotmixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified. |
| 50 | Demolition of cement conctrete (un-reinfoeced) of any description and in any position not otherwise specifically provided |
| 51 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs, benching etc rounded or chamfered angles and throatingcomplete all as specified and as directed. |
| 52 | M&L brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified |
| 53 | M&L for 10 mm thick screed bed in CM 1:4 with water proofing compound over levelling course, finished surface even/smooth without using extra cement all as specified and directed. Note:- Water proof compound shall be measured and paid & separetly to IS. |
| 54 | Supply only Integral Water Proofing Compound conforming to IS all as specified and as directed. |
| 55 | M&L priming surfces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt , grade 2 complete all as specified. |
| 56 | M & L for applying evenly a tack coat of industrial bitumen 85/25 grade at the rate of 1.2 kg per sqm applied on the cleaned surfaces complete all as specified & directed. |
| 57 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polysterr non wove fabric(wt not less than 150gms/sqm) land on primed surface by forced application complete all specified |
| 58 | M & L for applying one coat of bituminous aluminium paint @100gms/sqm complete all as specified and as per manufaturer"s instructions. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
