Military Engineer Services-MES has published Tender For Additional/Alternator To Smq At Tata Nagar And Certain Minor Works At Afs Madh Island Under Ge Af Thane.. Submission Date for this Tender is 19-03-2024. Mobile Generator Tenders in thane Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Mar-2024 | TENDER DOCUMENT | Other | 12-03-2024 |
| 2 | 12-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-03-2024 |
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft soil ,complete all as specified and as directed by Engr-in-charge. |
| 2 | M&L for Hard core, broken to gauge n exc 63 mm , using broken stone or boulder all as specified and as directed by Engr-in-Charge. |
| 3 | M&L for Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete ,complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick, set jointed and pointed in cement slurry in floors with grey cement to match over including 15mm thick screed bed in CM 1:6 and pigments ,complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for providing, cement concrete type B1 1:2:4 (20 mm gradedstone aggregate in roof kerbs or mud stops, rounded or chamfered on edges ,complete all as specified and directed by Engr-in-Charge. |
| 6 | S&F factory made single exstruded WPC (Wood polymer composite) solid door/ window ceosetory window & other frames/ chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K Value 58-60 (suspension Grade) calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/ mm2 , modules of elasticyty 900N / mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fireretardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer -in - charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note :- For WPC Solid door/ window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile but no extra payment on this account shall be made ,complete all as specified and directed by Engr-in-Charge. |
| 7 | S&F factory made single extruded WPC (Wood polymer composite ) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 ((suspension Grade) calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) f having minimum frame density of 650 kg/ cum, screw withdrawal strength of1800 N (Face) & 900N (Edge), minimum compressive strength of 50N/ mm2 , modules of elasticyty 850N / mm2and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fireretardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as perdirection of Engineer -in - charge. Note Stainless steel butt hinges and necessary S S Screws shall be paid separately) ,complete all as specified and directed by Engr-in-Charge. |
| 8 | S&F 100mm sizeButt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 ,complete all as specified and directed by Engr-in-Charge. |
| 9 | S&F 100 mm long aluminium anodized barrel tower bolts of extruded section ,complete all as specified and directed by Engr-in-Charge. |
| 10 | S&F 100 mm extruded aluminium alloy handles fabricated type anodized ,complete all as specified and directed by Engr-in-Charge. |
| 11 | Dismenrling floor hearth or wall tilling including cement mortar bedding ( but not backing) all as specified by Engr-in-charge. |
| 12 | M&L for Coloured Glazed Ceramic tiles300 x 200 and6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.. |
| 13 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base of 15mm thick in CM 1:6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-Charge. |
| 14 | M&L Granite slab work 18 to 20mm thick in floors steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 16 | Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site all as specified. |
| 17 | M&L for rendering 15mm thick in cm 1:6 finished with neeru finish as specified on fair faces of brick work or concrete surfaces,complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L preparing newly plastered surfaces ,and applying 2 coats of Oil Bound Distemper over a coat of alkali resistent primer Over 1 mm thick wall care putty on walls complete all as specified and directed by Engineer-in-Charge. |
| 19 | Demolition of brickwork built in cement mortar including all pillars, etc and removing of the debris as directed by Engr-In-Charge. |
| 20 | M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in CM 1:6all as specifed and directed by Engr-in-Charge. |
| 21 | S&F in repair Stainless steelsinks with draining board made out of1mm thick sheet for kitchenwith plugs, washers and waste pipe, cast iron cantiliver bracketsand connecting union to pipe overall size 915mmx460mmx with bowl size 410mmx330mmx160mmwith plugs, washers and wastes: including bedding in cement mortar on to dwarf walls, or inculding fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each ,complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F in repairs bib taps cast copper alloy with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore ,complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for Rendering, 20mm thick in two coats (15mm thick in CM 1:6 and 5mm thick in CM 1:4 ) with using integral waterproofing compound finished even & smooth without using extra cement ( Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.). |
| 24 | Supply only liquid water proofing compound ,complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for finishing walls with Acrylic smooth exterior paint of required shade : New work (two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm) ,complete all as specified and directed by Engr-in-Charge. |
| 26 | S & F Steel rolling shutters of 1mm thick lath, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with chain wheel and hand chain ,complete all as specified and directed by Engr-in-Charge. |
| 27 | S & F Safety lever locks mild steel with 4 levers for rolling shutters ,complete all as specified and directed by Engr-in-Charge. |
| 28 | S & F Ball bearing for rolling shutters ,complete all as specified and directed by Engr-in-Charge. |
| 29 | M & LProviding and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand ,complete all as specified and directed by Engr-in-Charge. |
| 30 | M & L for Cement concrete Type B0 1:2:4 (12.5mm graded stone aggregate) as in kerb stone including weathering, slightly rounded or chamfered angles and throating ,complete all as specified and directed by Engr-in-Charge. |
| 31 | M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using brocken stone or boulders ,complete all as specified and directed by Engr-in-Charge. |
| 32 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm ,complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L Cement concrete in post holes or similar holes using type B2 1:2:4 (40mm graded stone aggregate) ,complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F Rolled mild steel Fe-410- W(Gde- E-250) quality- B in: Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in cluding cleats, brackets, etc. ,complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F Plates (plain or chequered) Fe 410 -W (Gde E- 250) quality Achannels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment ,complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long ,complete all as specified and directed by Engr-in-Charge. |
| 37 | M & L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed with grey pigment cement in floors over cement screed bed of 20mm thick in cement mortar 1:6 ,complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for Painting to new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats over a coat of red oxide primer ,complete all as specified and directed by Engr-in-Charge. |
| 39 | Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any exc 4 Kg per Sqm ,complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for 1:4:8 type D2 using 40mm graded stone aggregate as in sub base floor, 75mm thick ,complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for 1:2:4 type B2 using 40mm graded aggregate as in sub base floor, 50mm thick all as specified and directed by Engr-in-Charge. |
| 42 | M&L For Glass dividing strips, 3 mm thick, 38mm in width inserting in position complete all as specified and directed by Engr-in-Charge. |
| 43 | M & L Pre-cast cement concrete block masonrytype C1 (20mm stone graded aggregate) set in cement mortar 1:6 with solid blocks, exc. 10 cm in width and setting in mortar,complete all as specified and as directed. |
| 44 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level),complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F Rolled sections as in main and cross beams( Fe-410 Gde E-250), hip and jack rafters; purlins where connectedto common rafters and running rails and guides for sliding doors; fixedwithangle cleats or other connecting plates |
| 46 | M&L for two coat of synthetic enamel paint over a coat of Red oxide on newly untreated Surfacesof any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed by Engr-in-Charge. |
| 47 | Taking down carefully point wiring and removing from site such as (Light,fan socket or power) Complete including fitting and fixtures,fan regulators switch boards,switches,ceiling rose"s lamp holder from existing batten PVCconduit/steel conduit wiring complete excluding light fittings and fans all as specified and making good to the disturbed surfaces to match with existing ,complete all as specified and as directed |
| 48 | Supply and fixindustrial socket metal clad plug and socket with MCBs single pole 20 Amp complteall as specified and directed . |
| 49 | S & Ffor Sub Mainwiring with two single core 4 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts gradedrawn in through flexible non metallic PVCconduit with and including PVC insulated 4 Sqmm multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly and making the gooddisturbed surfaces of wallin CM 1:3 with white wash or existing colour ,complete all as specified and as directed (Note : PVC cable and PVC conduit shall be ISI marked) ( Make of cable - Havells/Anchor/Finolex) Note :- Two length of 4 Sqmm cable and one length of 4 Sqmm earth cable along with PVC conduit will be measured as one running length |
| 50 | M & Lfor concealed conduit point wiring complete for light/ fan on independent /combine boardwith cable 1.5 sqmm (Nominal area) FRLSPVC insulated multistranded unsheathed copper conductor,drawn in and includingPVC Concealed conduitpipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , aftercutting in wall chasing for conduits and sinking"s for sunkencast iron/ pressed steelterminal boxes suitable lengthandthickness for mounting, switches, sockets,fan regulatorwith 3 mm thick plastic laminated sheet cover fixedwith cadmium plated machine screws and cup washers, dulygrouting and painted with red oxide metal primer and making the gooddisturbed surfaces of wallin CM 1:3 with white wash or existing colour including provision ofcontinuousearth continuity conductoralong with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switchand connected to commonearth dolly, complete all as specified anddireced. |
| 51 | All as per Srl item No -50.00 here in before but for onesocket outlet 5/6 amp on independent board complete all as specified and directed. |
| 52 | All as per Srl item No -50.00 here in before but for one switch socket combinationt 6 pin 6/ 16 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed. |
| 53 | S & F ceiling rose surface bakelitethree terminals complete all as specified and directed . |
| 54 | S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified complete all as specified and directed |
| 55 | S&F Switch piano, flush type single pole, one way 16 Amp complete all as specified and directed. |
| 56 | S&F Socket outlet 2 in 1, 5 pin, 5A complete all as specified and directed. |
| 57 | S&F Socket outlet 2 in 1, 6 pin, 6/16A flush type complete all as specified and directed. |
| 58 | S&F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed. |
| 59 | S & F stepped type,single socket fan regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed. |
| 60 | S & F angle holder insulated body with back plate for conduit fittings including led bulb 9W complete all as specified and directed. |
| 61 | S & Fsheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 4 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof, IP 42 suitable for incorporation MCBs and isolators etcincluding taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed. |
| 62 | S & FMCB ‘B’ series type suitable for 240 volts, AC supply6 to 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 63 | S & FMCB ‘B’ series type suitable for 240 volts,10 KA,AC supply6 to 32 Amps , single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 64 | Taking down carefully existing serviceable LED Tubelight/ bulkhead/ security light of any sizeand refixingthe same to respective location after carrying outcleaning all the components of fittings, including replacement of nuts, bolts and connection withflexiblecable copper conductortwin coreof size 23/.2 mm upto ceiling rose/connector complete all as specified and directed. |
| 65 | S & FLED Tubelight fitting with polycarbonate housing andintegrated electronic driver,20 watt having input voltage AC90-300V, 50 Hz , 6500K, surge protection min 4 KVA and all other accessories including connection with flexiblecable copper conductortwin coreof size 23/.2 mm upto ceiling rose/connector complete all as specified and directed . |
| 66 | S & FLED Water tight bulk head fitting 10 W,with connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LEDall as specified and directed. |
| 67 | M&L for Disconnectingelectric connection and taking down carefully serviceable ceiling fans,exhaust fan and Geyser and keep in safe custudy. After the building repair work or as directed refixing /hanging the ceiling fan and geyser including electric connection with and including new flexible sheathed copper wire 3 core from ceiling rose/connector to fan connector, including in replacement new nut bolts, rubber reel, capacitor 2.5mfd, machine screws and split pins etc including painting the ceiling fan,exhaust fan complete body with blades, canopies, down rod etc. with synthetic enamel paint by spray gun after scraping down old paint in colour as directed complete all as specified. |
| 68 | S&F Heavy duty metal body exahust fan of 300mmsweep ,240 volt,copper winding, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVCsheathed copper conductorflexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in cement mortar (1 :4) white washing matching with existing colour etccomplete all as specified and directed . |
| 69 | S&F ceiling fans AC single phase 230/240 V of size 1200 mm sweepwithout regulator having Min air delivery 210 CFM with service value 6.00 BEE5 star rated with brushless direct current motor (BLDC) complete with electrical connection providing three core round flexible copper conducter cable of suitable sizecomplete all as specified and directed . MAKE: Orient electric 1200mm hector 500. Havells effeciencia neo 1200mm, Cromption Energin HS. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
