Tender For Work Of Supply Of Wheel Barrows And Hand Carts To Health Store, jaipur-Rajasthan

Work Of Supply Of Wheel Barrows And Hand Carts To Health Store , Supply Of 06 Container With Hand Push Cart ( Wheel Barrows ) Of Size 1200X800x250 Mm, Main Frame Made Out Of I.S.A. 25X25x5 Mm. M.S. Angle Frame All Side & Bottom Of 5X25x5 Mm. Tee And 25X5 Mm Flat For Resting Of Bins, Handle With 30 Mm Dia Pipe Of 16 Gauge Including Wheels With Bearing Duly Painted Complete In All Respect As Per Direction Engineer Incharge And Enclosed Terms And Conditions. The Tenderer Has To Supply One Wheel Barrow For Sample As Per Specification. , ( Techical Bid ) Terms And Conditions Specification Of Hand Push Cart ( Six Container Wheel Borrows ) , The Size Of Pushcart Should Be 1200 Mm X 800 Mm X 250 Mm With 6 Compatments For Accommodation 6 Nos. Of Polyethylene Bins Of 30 Liters Capacity As Per The Following Specifications. Main Frame: 25 Mm X 25 X 5 Mm Ms Angle In All Directions. Bottom: 50Mm X 25Mm X 5 Mm M.S. T Section On Number At The Center Longitudinally And Two Number Laterally 25Mm X 5Mm M.S. Flats Longitudinally And Laterally For Restion The Bins. The Ms Sheet Of 18 Gauge Is To Be Provided At Bottom Sides: 25Mm X 5Mm M.S. Flats 6 Nos. Vertically And The All Four Sides Should Be Covered With M.S. Sheet Of 18 Gauges Thick Welded Properly. Handle: Handle Of 30Mm Dia M.S. Pipe Of 16 Gauge Thickness Fitted With The Pushcart By Means Of 25Mm X 25Mm X 5Mm M.S. Angle. Wheel : The Pushcarts Should Be Fitted With 25Mm Dia Axles, Double Bearing, 4 Wheels Of450 Mm Dia X 50Mm Outer Width Wheel, Also Be Provided With Rubber On Circumference And Wheel Are Mainifature In Pipe As Per Direction Of Engineer In Charge. Painting: Painting With Two Coats Of Anticorrosive Paint As Per The Specified Colour And As Per The Directons Of The Departmental Officers. Weight:Total Weight Of Push Cart Without Polyethylene Containers. Aprox Mat ( 55 Kg. Torlance - / + 5% ) Bell: - Standard Metal Bell Shall Be Mounted On The Rame There Should Be A Provision To Cover The Hand Carts With Hdpe Sheets With Provision Of Roll-On And Roll Off To Meet Out He Msw Rules 2000. The Cover Should Be Properly Fixed On The Hand Carts. , Specifications Of Polyethylene Containers 30 Liters Capacity To Be Used In The Hand Pushcart ( Six Container Wheel Borrows ) , Requirement :- Bins To Be Used For Collection Of Municipal Solid Waste And Street Sweepings Overall Size :- • Top Size - 325 X 325 Mm • Bottom Size - 290 X 290 Mm • Overall Height - 325 Mm • Four Holes On Bottom Side With 10Mm Diameter • Ribs On Bottom Side With 10Mm Size Should Be Provided For Easy Handling. • Handle: 8Mm Daimeter Ms Bar With Ms Strip Of 1.6 Mm Thickness On Both Sides Of Handle With Heavy Duty Suitable Rivets. • Thickness All Side 3Mm Expect Wall Thickness+ / -5% • Toleraness:+ / -3Mm Except Wall Thickness • Bottom Should Be 4Mm Thick. • Embossment: Jmc On The Sides Of The Bins. Material :- • Special Grade Of Payethylene Material Absolutely Non-Toxic Free From Any Contamination And Chemical Reaction And Uv Stablized. • Polymer To Be Used For Moulding Should Be Virgin. • Proved The Polyethylene Bins Are ( Neelkaml, Sintax, Polycon And Etc. ) Colour :- • Blue And Green As Per Directions Of The Department Officers. , Uksv%& Laosnd@Qez } Kjk Nj Dkwye Esa Eqrkfcd ;Qfuv Ds Vuqlkj Nj Hkjsa ] Ftldh X.Kuk Dqy Jkfk Lfgr Djds Vafdr Djsaa Vksoj Jkbzfvax , Oa Dfvax Eku; Ugh Gksxh ] ;Fn Lgou Ls Gks Tk;S Rks Vius Glrk { Kj Dfvax Ds Ikl Vafdr Djuk Gksxka

INR 1500 /-

INR 178000.0 /-

INR 89 Lakhs /-