Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #42422947

Tender For Repairing Of Centrifugal Pump Sets Under Various Water Supply Scheme Of Division Falna (Annual Rate Contract)

Issued by Government Departments · falna, Rajasthan
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
04 Mar 2024
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
falna → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender For Repairing Of Centrifugal Pump Sets Under Various Water Supply Scheme Of Division Falna ( Annual Rate Contract )

BOQ

Name of Work :- Repairing of Centrifugal Pump Sets Under Various WSS of Division Falna (Annual Rate Contract)(Rates are as per BSR Approved O&M BSR Jodhpur 2020)
Sl. No. Item Description
1Repairing & Rewinding of Monoblock/ Centrifugal pump set : PART (A): REPAIR AND REWINDING OF MONOBLOCKPUMPS : Rewinding of three phase squirrel cage induction motor ofMonoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),\"E\" class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge. 3 H.P.
25 H.P.
37.5 HP
410.00 HP
512.5 HP
615.00 HP
717.50 HP
820.00 HP
9SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP). Connection Plates. up to 10 HP
1010 HP to 20 HP
11Cooling Fan. up to 10 HP
1210 HP to 20 HP
13GM/SS bush. Upto 10 HP
1410 HP to 20 HP
15Mechanical reconditioning of Bearing sheet. Upto 10 HP
1610 HP to 20 HP
17Mechanical reconditioning ofImpeller sheet and Key way slot. Upto 10 HP
1810 HP to 20 HP
19Oil seal. Upto 10 HP
2010 HP to 20 HP
21Labour charge for opening and fitting of pump sets. Upto 10 HP
2210 HP to 20 HP
23Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (including cost of copper wire) \"E\" class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump setsand transportation to and fro from installation site complete as per direction of engineer in charge at site. Above 15.00 HP but upto 17.50 HP
24Above 17.50 HP but upto 20.00 HP
25Above 20.00 HP but upto 25.00 HP
26Above 25.00 HP but upto 30.00 HP
27Above 30.00 HP but upto 35.00 HP
28Above 35.00HP but upto 40.00 HP
29Above 40.00 HP but upto 45.00 HP
30Above 45.00 HP but upto 50.00 HP
31Above 50.00 HP but upto 60.00 HP
32Above 60.00 HP but upto 75.00 HP
33Above 75.00 HP but upto 100.00 HP
34SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP). Connection Plates. 5 HP to 20 HP
3520 HP to 30 HP
3630 HP to 50 HP
37Above 50 HP to 100 HP
38Cooling Fan. 5 HP to 20 HP
3920 HP to 30 HP
4030 HP to 50 HP
41Above 50 HP to 100 HP
42Fan Cover. 5 HP to 20 HP
4320 HP to 30 HP
4430 HP to 50 HP
45Above 50 HP to 100 HP
46G.M./SS Gland Guide Bush. 5 HP to 20 HP
4720 HP to 30 HP
4830 HP to 50 HP
49Above 50 HP to 100 HP
50Shaft with Sleeve Chuck Nut. 5 HP to 20 HP
5120 HP to 30 HP
5230 HP to 50 HP
53Above 50 HP to 275 HP
54Shaft Chuck Nut. 5 HP to 20 HP
5520 HP to 30 HP
5630 HP to 50 HP
57Above 50 HP to 275 HP
58G.M. Neck Ring. 5 HP to 20 HP
5920 HP to 30 HP
6030 HP to 50 HP
61Above 50 HP to 100 HP
62Bush Shaft Sleeve of G.M. 5 HP to 20 HP
6320 HP to 30 HP
6430 HP to 50 HP
65Above 50 HP to 100 HP
66G.M. Gland Cover. 5 HP to 20 HP
6720 HP to 30 HP
6830 HP to 50 HP
69Above 50 HP to 100 HP
70S.S. Shaft (Non Magnetic). 5 HP to 20 HP
7120 HP to 30 HP
7230 HP to 50 HP
73Above 50 HP to 100 HP
74G.M. Shaft Sleeve Check Nut. 5 HP to 20 HP
7520 HP to 30 HP
7630 HP to 50 HP
77Above 50 HP to 100 HP
78M.S. Shaft Check Nut. 5 HP to 20 HP
7920 HP to 30 HP
8030 HP to 50 HP
81Above 50 HP to 100 HP
82Cooling pipe set with nozzle & Nut. 5 HP to 20 HP
8320 HP to 30 HP
8430 HP to 50 HP
85Above 50 HP to 100 HP
86AIR Cock. 5 HP to 20 HP
8720 HP to 30 HP
8830 HP to 50 HP
89Above 50 HP to 100 HP
90JOB WORK FOR REPAIR OF PUMP MOTOR. Bearing Housing (rebuilding, turning & finishing). 5 HP to 20 HP
9120 HP to 30 HP
9230 HP to 50 HP
93Above 50 HP to 100 HP
94Bearing Cap (rebuilding, turning & finishing). 5 HP to 20 HP
9520 HP to 30 HP
9630 HP to 50 HP
97Above 50 HP to 100 HP
98Impeller Reconditioning for all type of Pump. 5 HP to 20 HP
9920 HP to 30 HP
10030 HP to 50 HP
101Above 50 HP to 100 HP
102Labour Charges for Dismantling & Assembling of Pump. 5 HP to 20 HP
10320 HP to 30 HP
10430 HP to 50 HP
105Above 50 HP to 100 HP
106Coupling with stud and rubber bush. 5 HP to 20 HP
10720 HP to 30 HP
10830 HP to 50 HP
109Above 50 HP to 100 HP
110Supply & Fixing of tyre coupling sets according torelevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge. Type 14 Nos. set
111Type 15 Nos. set
112Type 16 Nos. set
113Type 17 Nos. set
114Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC. 6304 or equivalent size
1156305 or equivalent size
1166306 or equivalent size
1176307 or equivalent size
1186308 or equivalent size
1196309 or equivalent size
1206310 or equivalent size
1216311 or equivalent size
1226312 or equivalent size
1236316 or equivalent size
1246317 or equivalent size
1256318 or equivalent size
1266319 or equivalent size
127NU319C or equivalent size
128Suuplying of super enamal copper wire suitable for rewindind of induction motor (only procured for motor rewinding)
129Preventive Maintenance : Routine maintenance of centrifugal coupled pump and motorincluding opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, baseplate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job. 5 HPto 20 HP
13020 HPto 30 HP
131Above 30 HP and up to 50 HP
132Above 50 HP and up to 100 HP
133Cleaning of pump house by air blower/ vacuum cleaner or other means including removing of JALA from ceiling and walls etc. complete Job.
134Cleaning of Electric PanelPMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job.
135Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job. 5 HP to 20 HP
136Above 20 HP and up to 30 HP
137Above 30 HP and up to 50 HP
138Above 50 HP and up to 100 HP

AI Tender Summary

OUR REF NO 42422947
AUTHORITY Government Departments
TENDER VALUE 7.50 Lakhs
LAST DATE 04-03-2024
Authority
Authority Name Public Health Engineering Department
Work Description Tender For Repairing Of Centrifugal Pump Sets Under Various Water Supply Scheme Of Division Falna ( Annual Rate Contract )
Basic Detail
Tender No NIT No 173/2023-24
Bidding Type Tender
Location
City falna
State Rajasthan
Key Dates
Publish Date 21 Feb 2024
Submission Date 04 Mar 2024
Open Date 04 Mar 2024
Finance
Tender Value 7.50 Lakhs
Tender Fee 1000
EMD 15000
Exemption Not Available
Document List
1d7320f9-d003-48a3-809c-c62debb672d5.html
BOQ_681318.xls
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 21, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Mar 04, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Mar 04, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

1d7320f9-d003-48a3-809c-c62debb672d5.html

xls

BOQ_681318.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders