|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. DSR 2023 ITEM N. 15.2.2 |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge DSR 2023 ITEM N. 15.7.1 |
| 3 | Deduct the cost of old bricks |
| 4 | Ded the cost of old bricks /batts |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil DSR 2023 2.6.1 |
| 6 | Desposal of refused material/malwa distance up to 5 km etc all complete as the direction of engineer in charge. (AS PER DSR 2023 PAGE N. 83 ITEM N. 1.1.2 ) |
| 7 | S/L P:C:C (1:6:12) with 40 mm gauge brick ballast ,fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer - in - charge.{ AS PER PWD SOR 2022 PAGE NO 18 SI NO 5.01 ITEM NO 273 } |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand): DSR 2023 ITEM N. 6.1.1 |
| 9 | 12 mm thick plaster with cement and coarse sand in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. DSR 2023 ITEM N. 13.4.1 |
| 10 | s/s of 22.4 to 53 mm size stone ballest etc all comp.Ar |
| 11 | consolidation of stone ballast etc all comp.sor 2022 item no 752 |
| 12 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern DSR 2023 16.91.2 |
| 13 | S/L C:C (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (AS PER DSR 2023 ITEM N. 4.1.3 ] |
| 14 | GST |
