Uttar Pradesh Projects Corporation Limited has published Tender For Establishment Of Air Handling Unit For Negative Pressure With Sensor Medical With Gas Pipe Line Of These Bed In S.N. Medical College, Agra (U.P.). Submission Date for this Tender is 27-02-2024. Air Handling Unit Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Feb-2024 | Equipment Spcilization | Technical Bid | 27-02-2024 |
| Sl. No. | Item Description |
| 1 | Suply, Installation, Testing and Commissioning of Modular type outdoor units equipped with highly efficient scroll compressors with all inverter compressor(s), centrifugal fan for condenser, ODU having front suction & top discharge, outdoor unit support, auto check function for connectionerror, auto address setting an capacity as mentioned below. VRF System shall be suitable for working on 48o ambient temperature, Refrigerant R 410A 18 HP only cooling |
| 2 | Supply, installation, testing & commissioning of Factory Fabricated Foor Mounted Type Double Skin AHUS complete with Fan Section, Fan Motor, Cooling Cell with Coil Section, without face and by pass dampers complete with backward curved blower, blower section filter section with Pre-filters, drive package etc. the capacity of the Air Handling Units suitable for 40-50 mm WG Static Pressure with 4/6 Row Deep Cooling Coil. 11500 CFM Capacity |
| 3 | Supply, installation, testing & commissioning of Y-joints |
| 4 | Supply, installation, testing & commissioning of Corded Self Diagnostic Type Remote Controllers. |
| 5 | Supply, installation, testing & commissioning of expansion valve kit with control box suitable for AHU |
| 6 | Supply, installation, testing and of interconnectign b.igh pressure copper refrigerant piping work suitable for refrigerant R 410 A duly insulated with elastomeric nitrite rubber type tubular insulation of clensity 55+/- 10% kg/m3 between indoor & outdoor units as per specifications. |
| 7 | Supply, installation, testing and commissioning of PVC condensate drain water piping complete with fittings like elbows, tees, reducers, bends, flanges supports, insulation etc. as required and of following sizes. 32mm dia pipe, Insulation Thickness - 9 mm |
| 8 | Supply, installation, testing and commissioning of PVC condensate drain water piping complete with fittings like elbows, tees, reducers, bends, flanges supports, insulation etc. as required and of following sizes. 40mm dia pipe, Insulation Thickness - 9 mm |
| 9 | Providing & fixing of control cum trans0mission wiring of copper between indoor and outdoor unit in 25mm PVC Conduit. 2C x 1.5 Sq. mm |
| 10 | Supply and installation of GI perforated cable tray with required GI bend reducer, cross, tee etc. including GL threaded hanger/channel support of following sizes. 150 rum x 50 mm |
| 11 | Supply and installation of GI perforated cable tray with required GI bend reducer, cross, tee etc. including GL threaded hanger/channel support of following sizes. 300 rum x 50 mm |
| 12 | Supply, fabrication & Erection of MS Stand including foundation complete is all respect. |
| 13 | Supply, fabrication and installation of GI Ducting Of: 22 Guage |
| 14 | Supply, fabrication and installation of GI Ducting Of: 24 Guage |
| 15 | Supply & fixing of Duct insulation with Cressed Linked Closed Cell Polyethylene Insulation for Supply and Return Air Duct. 13 mm |
| 16 | Supply & fixing of Duct acoustic lining with 25 mm thick crown 2000 Resin bonded glass wool covered with RP tissue paper & 26 G AL perforated sheet. |
| 17 | Supply/Return/Exhaust Air Linear Diffusers |
| 18 | Supply and installation of R-410 A refrigerant as required. |
| 19 | Supply, installation, testing and commissioning of AHU Starter Panel with 40 A TPN MCB with 16 A, DOL starter, overload relay, start/stop push buttons phase indication lights with protection fuse, on/off/trip indication lights with protection fuse, single phase preventer & auto/manual mode selector switch. |
| 20 | Power Cabling (XLPE insulated Aluminium/Copper conductor as given 4C x 16 Sq. min Copper Conductor |
| 21 | Power Cabling (XLPE insulated Aluminium/Copper conductor as given 4C x 35 Sq. min Al Conductor G.S.T Extra as per applicable |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
