Military Engineer Services-MES has published Tender For Repair / Maintenance (B/R Part) Of Installations Such As Ac Plant, Stp, Mech Laundary, Fire Fighting And Dg Set Under Age E/M Of Ge Jaipur At Jaipur Mil Stn. Submission Date for this Tender is 19-03-2024. Diesel Generators Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-03-2024 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water complete all as specified and directed |
| 2 | M&L for rendering 15mm thick cement plaster on stone masonary or other than fair faces of brickwork in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and incl a coat of primer incl chalk whiting complete all as specified and directed . |
| 4 | M&L for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for preparing new plastered surfaces of walls and applying two coats of exterior acrylic emulsion paint (1st quality) over and incl a coat of alkali resistant priming paint complete all as specified and directed |
| 6 | M&L for complete removal of existing treatment on old plastered surfaces of walls and preparation of surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means complete all as specified and directed. |
| 7 | M&L for preparation of old plastered surfaces of ceiling, filling depression with putty and applying two coats of oil bound distemper complete all as specified and directed . |
| 8 | M&L for complete removal of existing treatment of wall by mechanical means, preparing surfaces and applying two coats of exterior acrylic emulsion paint (1st quality) in plain patternover and incl a coat of alkali resistant priming paint complete all as specified and directed |
| 9 | Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid beded and pointed in any mortar complete all as specified and directed . |
| 10 | M&L for 75mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base finished even and fair complete all as specified and directed. |
| 11 | M&L machine pressed precast concrete interlocking coloured rubber moulded paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement and pigment laid over 25mm thick sand cushion complete all as specified and directed. Note : Sand for cushioning shall be measured and paid seperately. |
| 12 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 13 | M & L machine cut kota stone slab flooring 20-25mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 14 | Dismantling CGI / asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed. |
| 15 | M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 16 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed |
| 17 | Dismantling wrought iron or mild steel, including gates work of any description not otherwise provided for complete all as specified and directed. |
| 18 | S&F Mild Steel work in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E-250) qulaity A including fabrication, erraction and fixingincl one shop coat of zinc chrome primer paintcomplete all as specified and directed. |
| 19 | M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 all as specified and directed by Engineer-in-Charge. |
| 20 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside of MD Land complete all as specified and directed. |
| 21 | M&Lfor brick work with sub-class "B" bricks (ols size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:6 complete all as specified and directed |
| 22 | M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 23 | M&L for providing precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) block masonary with solid blocks, exc 10cm in width and setting in cement mortar 1:4 complete all as specified and as directed. |
| 24 | S&F in repair 1000 litres capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), two layered,hoisted and fixed in position on roof incl dismantling old one all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. |
| 25 | Taking down existing roof treatment complete including demolition ofPCC, Mud phuskas, lime concrete etc any description upto 200mm thick, and properly cleaning the surface to remove loose particles with wire brushes and removing the debris out side of MoD land complete all as specified and as directed by Eng- In-Charge. |
| 26 | M&L screed plaster 15mm thick in cement mortar (1:4) on concrete surfaces of roof to receive water proofing treatment finished even and fair incl mixing of WPC as per manufacturers instruction complete all as specified and directed. Note : WPC shall be measured and paid seperately |
| 27 | M&Lfor 25mm thick PCC 1:2:4, type B-0, (using 12.5 mm graded stone aggregate) finished even & smooth without using extra cement to cover negative slope into prop complete all as specified and directed |
| 28 | The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS: 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membraneshall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane including two coats ofaluminium paint complete all as specified and directed by Engr-in-Charge. Note : The work shall be carried out by authorised applicator |
| 29 | Supply only liquid water proofing compund complete all as specified and directed. |
| 30 | Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exc 1.50 Sqm each complete all as specified and directed. |
| 31 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm and n.exc 4.00 sqm each complete all as specified and directed. |
| 32 | Taking down shutters of any description of area exc 1 sqm but n exc 2sqm each complete all as specified and directed. |
| 33 | S &F framed work such as door frame, grills, gratings, etc., with ends of bar shoulder and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165 complete all as specified and directed. |
| 34 | S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash barsany numbers ,fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- S & F Glass/gauge shall be measured and paid for separately |
| 35 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings given in SSR Part – II complete all as specified and directed. |
| 36 | S & F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as given in SSR Part – IIcomplete all as specified and directed. |
| 37 | S & F 40mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 38 | S&F in repairs to galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples fixed in wodden door or steel windows complete all as specified & directed. |
| 39 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples fixed in wodden door or steel windows complete all as specified & directed. |
| 40 | M& L 200mm mild steel barrel tower blots, plate type stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 41 | S&F 250mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 42 | S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 43 | S & F 150mm size mild steel pressed handle, oval type, stove enamelled black fixed with screws complete all as specified and directed. |
| 44 | S&F 75 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed. |
| 45 | S&F 300mm, mild steel ordinary rat tail rod patternsprings, incl roller and roller plate complete all as specified and directed. |
| 46 | Supply & fix 150mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed. |
| 47 | S & F 150mm long aluminium handles, cast type anodised complete all as specified and directed. |
| 48 | M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed. |
| 49 | M&L for preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed. |
| 50 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm each pane complete all as specified and directed. |
| 51 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm each pane incl hacking out of old broken glass complete all as specified and directed. |
| 52 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square exceeding 0.5 sqm each pane incl hacking out of old broken glass complete all as specified and directed. |
| 53 | S&F steel windows or ventilator, factory made, fixed type complete with glazing bars incl inserting the holdfast in stone/brick masonary and make good the distrubed portion complete all as specified and directed. |
| 54 | S&F Steel windows with side hung shutters factory made including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded incl inserting the holdfast in stone/brick masonay and make good the distrubed masonary complete all as specified and directed. |
| 55 | S&F Steel windows with side hung shutters factory made including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded incl inserting the holdfast in stone/brick masonay and make good the distrubed masonary complete all as specified and directed. |
| 56 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm in width or girth, having shop coat red oxide zinc chrome primer and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified and as directed |
| 57 | M&L for preparing old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 58 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 59 | M&L joint free non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 60 | M&L for coloured glazed ceramic tiles (first quality) 450mm X 350mm X 7 to 8mm thick on vertical surfaces such as skirting and dados etc set and jointed in neat cement slurry pointed in coloured cement to match over and incl backing coat 10 mm thick in CM (1:4) complete all as specified and directed |
| 61 | Supply & fixing in repair vitreous china squatting pan, "Orissa patteren, size 580 x 440 mm white, with integral foot rests including P or S trap but (excluding flushing cisteren and flush pipe) including connection to trap and flushing pipe antisyphonage pipe etc complete all as specified and directed. |
| 62 | S&F in repairs Vitreous china wash down water closet (EWC) white, pedestal pattern complete, including connection to drain pipe and to flushing pipe antisyphonage pipe, (excluding flushing cistern) incl plastic water closet seat back closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device etc complete all as spd & directed |
| 63 | S&F in repairs PVC valveless, syphonic action flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flush pipe complete all as specified. |
| 64 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified & as directed. |
| 65 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550 x400 mm incl chromium plated waste fittings 32mm bore size, PVC waste pipe 32mm bore, angle iron brackets /fastners of reqd size, cutting for and pinning in ends of brackets complete all as specified and directed. |
| 66 | S&F in repair 5.50 mm thick of size600X450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 67 | S&F in repair tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 68 | S& F Stainless steel peg stay six complete all as specified and as directed |
| 69 | S&F in repair chromium plated brass soap dish, approximated sixe 160 x 160 x 90 mm fixed with CP brass screws complete all as specified and as directed. |
| 70 | S&F in repairs fancy type CP Health faucet 15 mm bore (ISI marked) including extension Pipe of 1 Mtr length complete all as specified and directed. |
| 71 | S&F in repair 15mm dia CP pillar taps cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 72 | S&F in repair 15mm bore stop valves cast copper alloy, fancy type cromium plated, screwed down high pressure, screwed both ends for iron pipes or for unions with long shank and cup (concealed type) and fixed complete all as specified and directed. |
| 73 | S&F in repair 15mm bore brass bib taps cast copper alloy with crutch or butterfly handle, long nose screwed down, screwed for iron pipe or for brass union complete all as specified and directed |
| 74 | S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 75 | S&F in repair angle valve 15mm dia bore cast copper alloy, chromium plated fancy type,with crutch or butterfly handle screwed down, high presure screwed both ends for iron pipe or union complete all as specified and directed. |
| 76 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 77 | S&F 75 mm bore UPVC(SWR) sewage disposal pipe water pipes single socketed (type B conforming to IS-13592) in any length with rubber ring joints laid in trenches or floors complete all as specified & directed. |
| 78 | S&F 110 mm UPVC ventilation and rain water pipes single socketed (type A conforming to IS-13592) in any length with rubber ring joints fixed to wall complete all as specified & directed. |
| 79 | S&F 110 mm dia uPVC (SWR) bends any radius with access door complete all as specified and directed. |
| 80 | S&F 110 mm dia uPVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed. |
| 81 | S&F 75 mm dia uPVC (SWR) bends any radius with access door complete all as specified and directed. |
| 82 | S&F 110 mm dia uPVC (SWR) Gully trap setting and jointing with solvent cement complete all as specified and as directed. |
| 83 | S & F in repair 15mm bore GI tubing medium grade with all necessary fitting, fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed |
| 84 | S & F in repair 20mm bore GI tubing medium grade with all necessary fitting, fixed to wall or concealed or fitted to ceiling or laid under floor incl taking down old one complete all as specified and directed |
| 85 | Dismantling fencing wire mesh, or in any position any type complete all as specified and directed |
| 86 | M&Lmild steel galvanised hard drawn steel wire 3.8mm dia of mesh wire, mesh size 50mm X 50mm incl line wires complete all as specified and directed. Note : Flat iron, nut bolts, round bars etc shall be measured and paid seperately. |
| 87 | S&F in repairs steel rolling shutter 1.25mm thick sheet with ball bearing as specified incl top covers, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated but gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 88 | Excavation in trenches n.exc 1.5 mt wide and n.exc 1.5 m in depth, for foundation etc or for shafts, wells, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Soft/loose soil complete all as specified and directed. |
| 89 | M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 90 | Removing excavated material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed. |
| 91 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed. |
| 92 | M&Lfor brick work with sub-class "B" bricks (ols size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 complete all as specified and directed |
| 93 | M & L for cement concrete ( 1:2:4 ) type B1 using 20 mm graded stone aggregate as in surface channels and drainscomplete all as specified and directed. |
| 94 | Supply and laying DWC pipes (Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 200 mm, laid in trenches and jointed complete with coupler, bends, tee, reducers etc complete all as specified & directed. |
| 95 | M&L providing precast cement concrete, type B1, 1:2:4 (20 mm graded aggregate ) set in cement mortar 1:4 in landing, cover slabs (for manholes etc.) chullah hoods,chajjas,water troughs, mangers,shelves and similar articles with plain faces including chamfers, weathering, throating etc complete all as specified and directed |
| 96 | S&F TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as directed and specified. |
| 97 | M& L for cutting into existing manholes for connecting in new drain, making good to pipe and rendering, cutting existing benching for and forming branch channel (1/2 or 3/4 section) in PCC 1:2:4 type B-1 using 20 mm graded crushed sone aggregtes) smooth finishing and reforming benching as reqd for 150 mm dia pipe complete all as secified and directed. |
| 98 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule "A"/BOQ |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
